cdac.medinfo.sdk.hl7282.baselibs.segments

Class IN1

java.lang.Object

cdac.medinfo.sdk.hl7282.baselibs.segments.Segment

cdac.medinfo.sdk.hl7282.baselibs.segments.IN1

All Implemented Interfaces:

ISegment

public class IN1
extends Segment

IN1 - Insurance Segment

The IN1 segment contains insurance policy coverage information necessary to produce properly pro rated and patient and insurance bills.

Represents an HL7 IN1 message segment. This segment has the following fields:

IN1-1: Set ID - IN1 (SI)Required
IN1-2: Insurance Plan ID (CWE)Required
IN1-3: Insurance Company ID (CX)Required
IN1-4: Insurance Company Name (XON)Optional
IN1-5: Insurance Company Address (XAD)Optional
IN1-6: Insurance Co Contact Person (XPN)Optional
IN1-7: Insurance Co Phone Number (XTN)Optional
IN1-8: Group Number (ST)Optional
IN1-9: Group Name (XON)Optional
IN1-10: Insured's Group Emp ID (CX)Optional
IN1-11: Insured's Group Emp Name (XON)Optional
IN1-12: Plan Effective Date (DT)Optional
IN1-13: Plan Expiration Date (DT)Optional
IN1-14: Authorization Information (AUI)Optional
IN1-15: Plan Type (CWE)Optional
IN1-16: Name Of Insured (XPN)Optional
IN1-17: Insured's Relationship To Patient (CWE)Optional
IN1-18: Insured's Date Of Birth (DTM)Optional
IN1-19: Insured's Address (XAD)Optional
IN1-20: Assignment Of Benefits (CWE)Optional
IN1-21: Coordination Of Benefits (CWE)Optional
IN1-22: Coord Of Ben. Priority (ST)Optional
IN1-23: Notice Of Admission Flag (ID)Optional
IN1-24: Notice Of Admission Date (DT)Optional
IN1-25: Report Of Eligibility Flag (ID)Optional
IN1-26: Report Of Eligibility Date (DT)Optional
IN1-27: Release Information Code (CWE)Optional
IN1-28: Pre-Admit Cert (PAC) (ST)
IN1-29: Verification Date/Time (DTM)Optional
IN1-30: Verification By (XCN)Optional
IN1-31: Type Of Agreement Code (CWE)Optional
IN1-32: Billing Status (CWE)Optional
IN1-33: Lifetime Reserve Days (NM)Optional
IN1-34: Delay Before L.R. Day (NM)Optional
IN1-35: Company Plan Code (CWE)Optional
IN1-36: Policy Number (ST)Optional
IN1-37: Policy Deductible (CP)Optional
IN1-38: Policy Limit - Amount (CP)Withdrawn
IN1-39: Policy Limit - Days (NM)Optional
IN1-40: Room Rate - Semi-Private (CP)Withdrawn
IN1-41: Room Rate - Private (CP)Withdrawn
IN1-42: Insured's Employment Status (CWE)Optional
IN1-43: Insured's Administrative Sex (CWE)Optional
IN1-44: Insured's Employer's Address (XAD)Optional
IN1-45: Verification Status (ST)Optional
IN1-46: Prior Insurance Plan ID (CWE)Optional
IN1-47: Coverage Type (CWE)Optional
IN1-48: Handicap (CWE)Optional
IN1-49: Insured's ID Number (CX)Optional
IN1-50: Signature Code (CWE)Optional
IN1-51: Signature Code Date (DT)Optional
IN1-52: Insured_s Birth Place (ST)Optional
IN1-53: VIP Indicator (CWE)Optional
IN1-54: External Health Plan Identifiers (CX)Optional
IN1-55: Insurance Action Code (ID)Optional

This class provides mechanism to validate message against HL7 v 2.8.2 standard. The class provides accessors & mutators for the elements mentioned above. The class has validate method which validates Message against HL7 v 2.8.2 standard.

User can also create Segment through SegmentFactory

Constructor Summary

Constructors

Constructor and Description
IN1() Constructs the IN1 segment.

Method Summary

Methods

Modifier and Type	Method and Description
void	addExternalHealthPlanIdentifiers(CX ExternalHealthPlanIdentifiers) Set the External Health Plan Identifiers.
void	addExternalHealthPlanIdentifiers(java.lang.String strIDNumber, java.lang.String strCheckDigit, java.lang.String strCheckDigitScheme, HD objAssigningAuthority, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepartment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Set the External Health Plan Identifiers.
void	addGroupName(java.lang.String strOrganizationName, CWE objOrganizationNameTypeCode, HD objAssigningAuthority, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strNameRepresentationCode, java.lang.String strOrganizationIdentifier) Set the Group Name.
void	addGroupName(XON GroupName) Set the Group Name.
void	addInsuranceCoContactPerson(FN objFamilyName, java.lang.String strGivenName, java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof, java.lang.String strSuffix, java.lang.String strPrefix, java.lang.String strNameTypeCode, java.lang.String strNameRepresentationCode, CWE objNameContext, java.lang.String strNameAssemblyOrder, DTM objEffectiveDate, DTM objExpirationDate, java.lang.String strProfessionalSuffix, java.lang.String strCalledBy) Set the Insurance Co Contact Person.
void	addInsuranceCoContactPerson(XPN InsuranceCoContactPerson) Set the Insurance Co Contact Person.
void	addInsuranceCompanyAddr(SAD objStreetAddress, java.lang.String strOtherDesignation, java.lang.String strCity, java.lang.String strStateOrProvince, java.lang.String strZipOrPostalCode, java.lang.String strCountry, java.lang.String strAddressType, java.lang.String strOtherGeographicDesignation, CWE objCountyParishCode, CWE objCensusTract, java.lang.String strAddressRepresentationCode, DTM objEffectiveDate, DTM objExpirationDate, CWE objEXpirationReason, java.lang.String strTemporaryIndicator, java.lang.String strBadAddressIndicator, java.lang.String strAddressUsage, java.lang.String strAddressee, java.lang.String strComment, java.lang.String strPreferenceOrder, CWE objProtectionCode, EI objAddressIdentifier) Set the Insurance Company Addr.
void	addInsuranceCompanyAddr(XAD InsuranceCompanyAddr) Set the Insurance Company Addr.
void	addInsuranceCompanyID(CX InsuranceCompanyID) Set the Insurance Company ID.
void	addInsuranceCompanyID(java.lang.String strIDNumber, java.lang.String strCheckDigit, java.lang.String strCheckDigitScheme, HD objAssigningAuthority, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepartment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Set the Insurance Company ID.
void	addInsuranceCompanyName(java.lang.String strOrganizationName, CWE objOrganizationNameTypeCode, HD objAssigningAuthority, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strNameRepresentationCode, java.lang.String strOrganizationIdentifier) Set the Insurance Company Name.
void	addInsuranceCompanyName(XON InsuranceCompanyName) Set the Insurance Company Name.
void	addInsuranceCoPhoneNumber(java.lang.String strTeleCommunicationUseCode, java.lang.String strTeleCommunicationEquipmentType, java.lang.String strCommuinicationAddress, java.lang.String strCountryCode, java.lang.String strAreaCityCode, java.lang.String strLocalNumber, java.lang.String strExtension, java.lang.String strAnyText, java.lang.String strExtensionPrefix, java.lang.String strSpeedDialCode, java.lang.String strUnformattedTelephoneNumber, java.lang.String strEffectiveStartDate, java.lang.String strExpirationDate, CWE objExpirationReason, CWE objProtectionCode, EI objSharedTelecommunicationIdentifier, java.lang.String strPreferenceOrder) Set the Insurance Co Phone Number.
void	addInsuranceCoPhoneNumber(XTN InsuranceCoPhoneNumber) Set the Insurance Co Phone Number.
void	addInsuredAddr(SAD objStreetAddress, java.lang.String strOtherDesignation, java.lang.String strCity, java.lang.String strStateOrProvince, java.lang.String strZipOrPostalCode, java.lang.String strCountry, java.lang.String strAddressType, java.lang.String strOtherGeographicDesignation, CWE objCountyParishCode, CWE objCensusTract, java.lang.String strAddressRepresentationCode, DTM objEffectiveDate, DTM objExpirationDate, CWE objEXpirationReason, java.lang.String strTemporaryIndicator, java.lang.String strBadAddressIndicator, java.lang.String strAddressUsage, java.lang.String strAddressee, java.lang.String strComment, java.lang.String strPreferenceOrder, CWE objProtectionCode, EI objAddressIdentifier) Set the Insured Addr.
void	addInsuredAddr(XAD InsuredAddr) Set the Insured Addr.
void	addInsuredEmployerAddr(SAD objStreetAddress, java.lang.String strOtherDesignation, java.lang.String strCity, java.lang.String strStateOrProvince, java.lang.String strZipOrPostalCode, java.lang.String strCountry, java.lang.String strAddressType, java.lang.String strOtherGeographicDesignation, CWE objCountyParishCode, CWE objCensusTract, java.lang.String strAddressRepresentationCode, DTM objEffectiveDate, DTM objExpirationDate, CWE objEXpirationReason, java.lang.String strTemporaryIndicator, java.lang.String strBadAddressIndicator, java.lang.String strAddressUsage, java.lang.String strAddressee, java.lang.String strComment, java.lang.String strPreferenceOrder, CWE objProtectionCode, EI objAddressIdentifier) Set the Insured Employer Addr.
void	addInsuredEmployerAddr(XAD InsuredEmployerAddr) Set the Insured Employer Addr.
void	addInsuredGroupEmpID(CX objInsuredGroupEmpID) Set the Insured Group Emp ID.
void	addInsuredGroupEmpID(java.lang.String strIDNumber, java.lang.String strCheckDigit, java.lang.String strCheckDigitScheme, HD objAssigningAuthority, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepartment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Set the Insured Group Emp ID.
void	addInsuredGroupEmpName(java.lang.String strOrganizationName, CWE objOrganizationNameTypeCode, HD objAssigningAuthority, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strNameRepresentationCode, java.lang.String strOrganizationIdentifier) Set the Insured Group Emp Name.
void	addInsuredGroupEmpName(XON InsuredGroupEmpName) Set the Insured Group Emp Name.
void	addInsuredIDNumber(CX InsuredIDNumber) Set the Insured ID Number.
void	addInsuredIDNumber(java.lang.String strIDNumber, java.lang.String strCheckDigit, java.lang.String strCheckDigitScheme, HD objAssigningAuthority, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepartment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Set the Insured ID Number.
void	addNameOfInsured(FN objFamilyName, java.lang.String strGivenName, java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof, java.lang.String strSuffix, java.lang.String strPrefix, java.lang.String strNameTypeCode, java.lang.String strNameRepresentationCode, CWE objNameContext, java.lang.String strNameAssemblyOrder, DTM objEffectiveDate, DTM objExpirationDate, java.lang.String strProfessionalSuffix, java.lang.String strCalledBy) Set the Name Of Insured.
void	addNameOfInsured(XPN NameOfInsured) Set the Name Of Insured.
void	addVerificationBy(java.lang.String strIDNumber, FN objFamilyName, java.lang.String strGivenName, java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof, java.lang.String strSuffix, java.lang.String strPrefix, CWE objSourceTable, HD objAssigningAuthority, java.lang.String strNameTypeCode, java.lang.String strIdentifierCheckDigit, java.lang.String strCheckDigitScheme, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strNameRepresentationCode, CWE objNameContext, java.lang.String strNameAssemblyOrder, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, java.lang.String strProfessionalSuffix, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepratment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Set the Verification By.
void	addVerificationBy(XCN VerificationBy) Set the Verification By.
CWE	getAssignmentOfBenefits() Retrieves the Assignment Of Benefits.
AUI	getAuthorizationInformation() Retrieves the Authorization Information.
CWE	getBillingStatus() Retrieves the Billing Status.
CWE	getCompanyPlanCode() Retrieves the Company Plan Code.
CWE	getCoordOfBenefits() Retrieves the Coord Of Benefits.
ST	getCoordOfBenPriority() Retrieves the Coord Of Ben Priority.
CWE	getCoverageType() Retrieves the Coverage Type.
NM	getDelayBeforeLRDay() Retrieves the Delay Before LR Day.
ISingleCollection<CX>	getExternalHealthPlanIdentifiers() Retrieves the External Health Plan Identifiers.
ISingleCollection<XON>	getGroupName() Retrieves the Group Name.
ST	getGroupNumber() Retrieves the Group Number.
CWE	getHandicap() Retrieves the Handicap.
ID	getInsuranceActionCode() Retrieves the Insurance Action Code.
ISingleCollection<XPN>	getInsuranceCoContactPerson() Retrieves the Insurance Co Contact Person.
ISingleCollection<XAD>	getInsuranceCompanyAddr() Retrieves the Insurance Company Addr.
ISingleCollection<CX>	getInsuranceCompanyID() Retrieves the Insurance Company ID.
ISingleCollection<XON>	getInsuranceCompanyName() Retrieves the Insurance Company Name.
ISingleCollection<XTN>	getInsuranceCoPhoneNumber() Retrieves the Insurance Co Phone Number.
CWE	getInsurancePlanID() Retrieves the Insurance Plan ID.
ISingleCollection<XAD>	getInsuredAddr() Retrieves the Insured Addr.
CWE	getInsuredAdministrativeSex() Retrieves the Insured Administrative Sex.
ST	getInsuredBirthPlace() Retrieves the Insured Birth Place.
DTM	getInsuredDOB() Retrieves the Insured DOB.
ISingleCollection<XAD>	getInsuredEmployerAddr() Retrieves the Insured Employer Addr.
CWE	getInsuredEmploymentStatus() Retrieves the Insured Employment Status.
ISingleCollection<CX>	getInsuredGroupEmpID() Retrieves the Insured Group Emp ID.
ISingleCollection<XON>	getInsuredGroupEmpName() Retrieves the Insured Group Emp Name.
ISingleCollection<CX>	getInsuredIDNumber() Retrieves the Insured ID Number.
CWE	getInsuredRelationshipToPatient() Retrieves the Insured Relationship To Patient.
NM	getLifetimeReserveDays() Retrieves the Lifetime Reserve Days.
ISingleCollection<XPN>	getNameOfInsured() Retrieves the Name Of Insured.
DT	getNoticeOfAdmissionDate() Retrieves the Notice Of Admission Date.
ID	getNoticeOfAdmissionFlag() Retrieves the Notice Of Admission Flag.
DT	getPlanEffectiveDate() Retrieves the Plan Effective Date.
DT	getPlanExpirationDate() Retrieves the Plan Expiration Date.
CWE	getPlanType() Retrieves the Plan Type.
CP	getPolicyDeductible() Retrieves the Policy Deductible.
NM	getPolicyLimitDays() Retrieves the Policy Limit Days.
ST	getPolicyNumber() Retrieves the Policy Number.
ST	getPreAdmitCert() Retrieves the Pre Admit Cert.
CWE	getPriorInsurancePlanID() Retrieves the Prior Insurance Plan ID.
CWE	getReleaseInformationCode() Retrieves the Release Information Code.
DT	getReportOfEligibilityDate() Retrieves the Report Of Eligibility Date.
ID	getReportOfEligibilityFlag() Retrieves the Report Of Eligibility Flag.
SI	getSetID_IN1() Retrieves the Set ID IN1.
CWE	getSignatureCode() Retrieves the Signature Code.
DT	getSignatureCodeDate() Retrieves the Signature Code Date.
CWE	getTypeOfAgreementCode() Retrieves the Type Of Agreement Code.
ISingleCollection<XCN>	getVerificationBy() Retrieves the Verification By.
DTM	getVerificationDateTime() Retrieves the Verification Date Time.
ST	getVerificationStatus() Retrieves the Verification Status.
CWE	getVIPIndicator() Retrieves the VIP Indicator.
void	setAssignmentOfBenefits(CWE objassignmentOfBenefits) Set the Assignment Of Benefits.
void	setAssignmentOfBenefits(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Assignment Of Benefits.
void	setAuthorizationInformation(AUI authorizationInformation) Set the Authorization Information.
void	setAuthorizationInformation(java.lang.String strAuthorizationNumber, java.lang.String strDate, java.lang.String strSource) Set the Authorization Information.
void	setBillingStatus(CWE objbillingStatus) Set the Billing Status.
void	setBillingStatus(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Billing Status.
void	setCompanyPlanCode(CWE objcompanyPlanCode) Set the Company Plan Code.
void	setCompanyPlanCode(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Company Plan Code.
void	setCoordOfBenefits(CWE objcoordOfBenefits) Set the Coord Of Benefits.
void	setCoordOfBenefits(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Coord Of Benefits.
void	setCoordOfBenPriority(ST objcoordOfBenPriority) Set the Coord Of Ben Priority.
void	setCoordOfBenPriority(java.lang.String strCoordOfBenPriority) Set the Coord Of Ben Priority.
void	setCoverageType(CWE objcoverageType) Set the Coverage Type.
void	setCoverageType(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Coverage Type.
void	setDelayBeforeLRDay(NM objdelayBeforeLRDay) Set the Delay Before LR Day.
void	setDelayBeforeLRDay(java.lang.String strDelayBeforeLRDay) Set the Delay Before LR Day.
void	setExternalHealthPlanIdentifiers(ISingleCollection<CX> objExternalHealthPlanIdentifiersList) Set the External Health Plan Identifiers.
void	setGroupName(ISingleCollection<XON> objGroupNameList) Set the GroupName list.
void	setGroupNumber(ST objgroupNumber) Set the Group Number.
void	setGroupNumber(java.lang.String strGroupNumber) Set the Group Number.
void	setHandicap(CWE objhandicap) Set the Handicap.
void	setHandicap(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Handicap.
void	setInsuranceActionCode(ID objInsuranceActionCode) Set the Insurance Action Code.
void	setInsuranceActionCode(java.lang.String strInsuranceActionCode) Set the Insurance Action Code.
void	setInsuranceCoContactPerson(ISingleCollection<XPN> objInsuranceCoContactPersonList) Set the InsuranceCoContactPerson list.
void	setInsuranceCompanyAddr(ISingleCollection<XAD> objInsuranceCompanyAddrList) Set the InsuranceCompanyAddr list.
void	setInsuranceCompanyID(ISingleCollection<CX> objInsuranceCompanyIDList) Set the InsuranceCompanyID list.
void	setInsuranceCompanyName(ISingleCollection<XON> objInsuranceCompanyNameList) Set the InsuranceCompanyName list.
void	setInsuranceCoPhoneNumber(ISingleCollection<XTN> objInsuranceCoPhoneNumberList) Set the InsuranceCoPhoneNumber list.
void	setInsurancePlanID(CWE insurancePlanID) Set the Insurance Plan ID.
void	setInsurancePlanID(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Insurance Plan ID.
void	setInsuredAddr(ISingleCollection<XAD> objInsuredAddrList) Set the InsuredAddr list.
void	setInsuredAdministrativeSex(CWE objinsuredAdministrativeSex) Set the Insured Administrative Sex.
void	setInsuredAdministrativeSex(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Insured Administrative Sex.
void	setInsuredBirthPlace(ST objinsuredBirthPlace) Set the Insured Birth Place.
void	setInsuredBirthPlace(java.lang.String strInsuredBirthPlace) Set the Insured Birth Place.
void	setInsuredDOB(DTM insuredDOB) Set the Insured DOB.
void	setInsuredDOB(java.lang.String strTime) Set the Insured DOB.
void	setInsuredEmployerAddr(ISingleCollection<XAD> objInsuredEmployerAddrList) Set the InsuredEmployerAddr list.
void	setInsuredEmploymentStatus(CWE insuredEmploymentStatus) Set the Insured Employment Status.
void	setInsuredEmploymentStatus(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Insured Employment Status.
void	setInsuredGroupEmpID(ISingleCollection<CX> objInsuredGroupEmpIDList) Set the InsuredGroupEmpID list.
void	setInsuredGroupEmpName(ISingleCollection<XON> objInsuredGroupEmpNameList) Set the InsuredGroupEmpName list.
void	setInsuredIDNumber(ISingleCollection<CX> objInsuredIDNumberList) Set the InsuredIDNumber list.
void	setInsuredRelationshipToPatient(CWE insuredRelationshipToPatient) Set the Insured Relationship To Patient.
void	setInsuredRelationshipToPatient(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Insured Relationship To Patient.
void	setLifetimeReserveDays(NM objlifetimeReserveDays) Set the Lifetime Reserve Days.
void	setLifetimeReserveDays(java.lang.String strLifetimeReserveDays) Set the Lifetime Reserve Days.
void	setNameOfInsured(ISingleCollection<XPN> objNameOfInsuredList) Set the NameOfInsured list.
void	setNoticeOfAdmissionDate(DT objnoticeOfAdmissionDate) Set the Notice Of Admission Date.
void	setNoticeOfAdmissionDate(java.lang.String strNoticeOfAdmissionDate) Set the Notice Of Admission Date.
void	setNoticeOfAdmissionFlag(ID objnoticeOfAdmissionFlag) Set the Notice Of Admission Flag.
void	setNoticeOfAdmissionFlag(java.lang.String strNoticeOfAdmissionFlag) Set the Notice Of Admission Flag.
void	setPlanEffectiveDate(DT objplanEffectiveDate) Set the Plan Effective Date.
void	setPlanEffectiveDate(java.lang.String strPlanEffectiveDate) Set the Plan Effective Date.
void	setPlanExpirationDate(DT objplanExpirationDate) Set the Plan Expiration Date.
void	setPlanExpirationDate(java.lang.String strPlanExpirationDate) Set the Plan Expiration Date.
void	setPlanType(CWE objplanType) Set the Plan Type.
void	setPlanType(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Plan Type.
void	setPolicyDeductible(CP policyDeductible) Set the Policy Deductible.
void	setPolicyDeductible(MO objPrice, java.lang.String strPriceType, java.lang.String strFromValue, java.lang.String strToValue, CWE objRangeUnits, java.lang.String strRangeType) Set the Policy Deductible.
void	setPolicyLimitDays(NM objpolicyLimitDays) Set the Policy Limit Days.
void	setPolicyLimitDays(java.lang.String strPolicyLimitDays) Set the Policy Limit Days.
void	setPolicyNumber(ST objpolicyNumber) Set the Policy Number.
void	setPolicyNumber(java.lang.String strPolicyNumber) Set the Policy Number.
void	setPreAdmitCert(ST objpreAdmitCert) Set the Pre Admit Cert.
void	setPreAdmitCert(java.lang.String strPreAdmitCert) Set the Pre Admit Cert.
void	setPriorInsurancePlanID(CWE objpriorInsurancePlanID) Set the Prior Insurance Plan ID.
void	setPriorInsurancePlanID(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Prior Insurance Plan ID.
void	setReleaseInformationCode(CWE objreleaseInformationCode) Set the Release Information Code.
void	setReleaseInformationCode(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Release Information Code.
void	setReportOfEligibilityDate(DT objreportOfEligibilityDate) Set the Report Of Eligibility Date.
void	setReportOfEligibilityDate(java.lang.String strReportOfEligibilityDate) Set the Report Of Eligibility Date.
void	setReportOfEligibilityFlag(ID objreportOfEligibilityFlag) Set the Report Of Eligibility Flag.
void	setReportOfEligibilityFlag(java.lang.String strReportOfEligibilityFlag) Set the Report Of Eligibility Flag.
void	setSetID_IN1(SI objsetID_IN1) Set the Set ID IN1.
void	setSetID_IN1(java.lang.String strSetID_IN1) Set the Set ID IN1.
void	setSignatureCode(CWE objsignatureCode) Set the Signature Code.
void	setSignatureCode(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Signature Code.
void	setSignatureCodeDate(DT objsignatureCodeDate) Set the Signature Code Date.
void	setSignatureCodeDate(java.lang.String strSignatureCodeDate) Set the Signature Code Date.
void	setTypeOfAgreementCode(CWE objtypeOfAgreementCode) Set the Type Of Agreement Code.
void	setTypeOfAgreementCode(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Type Of Agreement Code.
void	setVerificationBy(ISingleCollection<XCN> objVerificationByList) Set the VerificationBy list.
void	setVerificationDateTime(DTM verificationDateTime) Set the Verification Date Time.
void	setVerificationDateTime(java.lang.String strTime) Set the Verification Date Time.
void	setVerificationStatus(ST objverificationStatus) Set the Verification Status.
void	setVerificationStatus(java.lang.String strVerificationStatus) Set the Verification Status.
void	setVIPIndicator(CWE objvIPIndicator) Set the VIP Indicator.
void	setVIPIndicator(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the VIP Indicator.
boolean	validate() Validates HL7 Message objects .

Methods inherited from class cdac.medinfo.sdk.hl7282.baselibs.segments.Segment

addUnRecognizedField, dumpSegment, getFields, getName, getUnrecognizedFields, moveToNextSegment, parse, removeDataElement, removeDataElement, serialize, setName, setUnRecognizedField, updateDataElement, updateDataElement, writeToXML

Methods inherited from class java.lang.Object

equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

IN1

public IN1()

Constructs the IN1 segment.

Method Detail

getAssignmentOfBenefits

public CWE getAssignmentOfBenefits()

Retrieves the Assignment Of Benefits. This field indicates whether the insured agreed to assign the insurance benefits to the healthcare provider or not.

Returns:

CWE - assignmentOfBenefits

getAuthorizationInformation

public AUI getAuthorizationInformation()

Retrieves the Authorization Information. This field specify the authorization number or code be obtained prior to all non-emergency admissions, and within 48 hours of an emergency admission.

Returns:

AUI - authorizationInformation

getBillingStatus

public CWE getBillingStatus()

Retrieves the Billing Status. This field indicates whether the particular insurance has been billed and, if so, the type of bill.

Returns:

CWE - billingStatus

getCompanyPlanCode

public CWE getCompanyPlanCode()

Retrieves the Company Plan Code. This field contains optional information to further define the data in IN1-3 - Insurance Company ID.

Returns:

CWE - companyPlanCode

getCoordOfBenefits

public CWE getCoordOfBenefits()

Retrieves the Coord Of Benefits. This field indicates whether this insurance works in conjunction with other insurance plans, or if it provides independent coverage and payment of benefits regardless of other insurance that might be available to the patient.

Returns:

CWE - coordOfBenefits

getCoordOfBenPriority

public ST getCoordOfBenPriority()

Retrieves the Coord Of Ben Priority. This field contains priority sequence.

Returns:

ST - coordOfBenPriority

getCoverageType

public CWE getCoverageType()

Retrieves the Coverage Type. This field contains the coding structure that identify the type of insurance coverage, or what types of services are covered for the purposes of a billing system.

Returns:

CWE - coverageType

getDelayBeforeLRDay

public NM getDelayBeforeLRDay()

Retrieves the Delay Before LR Day. This field indicates the delay before lifetime reserve days.

Returns:

NM - delayBeforeLRDay

getGroupName

public ISingleCollection<XON> getGroupName()

Retrieves the Group Name. This field contains the group name of the insured's insurance.

Returns:

ISingleCollection - groupName

getGroupNumber

public ST getGroupNumber()

Retrieves the Group Number. This field contains the group number of the insured's insurance.

Returns:

ST - groupNumber

getHandicap

public CWE getHandicap()

Retrieves the Handicap. This field contains a code to describe the insured's disability.

Returns:

CWE - handicap

getInsuranceCoContactPerson

public ISingleCollection<XPN> getInsuranceCoContactPerson()

Retrieves the Insurance Co Contact Person. This field contains the name of the person who should be contacted at the insurance company. Multiple names for the same contact person may be sent in this field.

Returns:

ISingleCollection - insuranceCoContactPerson

getInsuranceCompanyAddr

public ISingleCollection<XAD> getInsuranceCompanyAddr()

Retrieves the Insurance Company Addr. This field contains the address of the insurance company.

Returns:

ISingleCollection - insuranceCompanyAddr

getInsuranceCompanyID

public ISingleCollection<CX> getInsuranceCompanyID()

Retrieves the Insurance Company ID. This field contains unique identifiers for the insurance company.

Returns:

ISingleCollection - insuranceCompanyID

getInsuranceCompanyName

public ISingleCollection<XON> getInsuranceCompanyName()

Retrieves the Insurance Company Name. This field contains the name of the insurance company.

Returns:

ISingleCollection - insuranceCompanyName

getInsuranceCoPhoneNumber

public ISingleCollection<XTN> getInsuranceCoPhoneNumber()

Retrieves the Insurance Co Phone Number. This field contains the phone number of the insurance company. Multiple phone numbers for the same insurance company may be sent in this field.

Returns:

ISingleCollection - insuranceCoPhoneNumber

getInsurancePlanID

public CWE getInsurancePlanID()

Retrieves the Insurance Plan ID. This field contains a unique identifier for the insurance plan.

Returns:

CWE - insurancePlanID

getInsuredAddr

public ISingleCollection<XAD> getInsuredAddr()

Retrieves the Insured Addr. This field contains the address of the insured person.

Returns:

ISingleCollection - insuredAddr

getInsuredAdministrativeSex

public CWE getInsuredAdministrativeSex()

Retrieves the Insured Administrative Sex. This field contains the gender of the insured.

Returns:

CWE - insuredAdministrativeSex

getInsuredBirthPlace

public ST getInsuredBirthPlace()

Retrieves the Insured Birth Place. This field contains the description of the insured's birth place.

Returns:

ST - insuredBirthPlace

getInsuredDOB

public DTM getInsuredDOB()

Retrieves the Insured DOB. This field contains the date of birth of the insured.

Returns:

DTM - insuredDOB

getInsuredEmployerAddr

public ISingleCollection<XAD> getInsuredEmployerAddr()

Retrieves the Insured Employer Addr. This field contains the address of the insured employee's employer.

Returns:

ISingleCollection - insuredEmployerAddr

getInsuredEmploymentStatus

public CWE getInsuredEmploymentStatus()

Retrieves the Insured Employment Status. This field holds the employment status of the insured.

Returns:

CWE - insuredEmploymentStatus

getInsuredGroupEmpID

public ISingleCollection<CX> getInsuredGroupEmpID()

Retrieves the Insured Group Emp ID. This field holds the group employer ID for the insured's insurance.

Returns:

ISingleCollection - insuredGroupEmpID

getInsuredGroupEmpName

public ISingleCollection<XON> getInsuredGroupEmpName()

Retrieves the Insured Group Emp Name. This field contains the name of the employer that provides the employee's insurance.

Returns:

ISingleCollection - insuredGroupEmpName

getInsuredIDNumber

public ISingleCollection<CX> getInsuredIDNumber()

Retrieves the Insured ID Number. This field data element contains a healthcare institution's identifiers for the insured.

Returns:

ISingleCollection - insuredIDNumber

getInsuredRelationshipToPatient

public CWE getInsuredRelationshipToPatient()

Retrieves the Insured Relationship To Patient. This field indicates the insured's relationship to the patient.

Returns:

CWE - insuredRelationshipToPatient

getLifetimeReserveDays

public NM getLifetimeReserveDays()

Retrieves the Lifetime Reserve Days. This field contains the number of days left for a certain service to be provided or covered under an insurance policy.

Returns:

NM - lifetimeReserveDays

getNameOfInsured

public ISingleCollection<XPN> getNameOfInsured()

Retrieves the Name Of Insured. This field contains the name of the insured person.

Returns:

ISingleCollection - nameOfInsured

getNoticeOfAdmissionDate

public DT getNoticeOfAdmissionDate()

Retrieves the Notice Of Admission Date. This field indicates the date that it is send.

Returns:

DT - noticeOfAdmissionDate

getNoticeOfAdmissionFlag

public ID getNoticeOfAdmissionFlag()

Retrieves the Notice Of Admission Flag. This field indicates whether the insurance company requires a written notice of admission from the healthcare provider or not.

Returns:

ID - noticeOfAdmissionFlag

getPlanEffectiveDate

public DT getPlanEffectiveDate()

Retrieves the Plan Effective Date. This field contains the date that the insurance goes into effect.

Returns:

DT - planEffectiveDate

getPlanExpirationDate

public DT getPlanExpirationDate()

Retrieves the Plan Expiration Date. This indicates the last date of service that the insurance will cover or be responsible for.

Returns:

DT - planExpirationDate

getPlanType

public CWE getPlanType()

Retrieves the Plan Type. This contains the coding structure that identify the various plan types.

Returns:

CWE - planType

getPolicyDeductible

public CP getPolicyDeductible()

Retrieves the Policy Deductible. This field contains the amount specify by the insurance plan that is the responsibility of the guarantor (i.e. deductible, excess, etc.).

Returns:

CP - policyDeductible

getPolicyLimitDays

public NM getPolicyLimitDays()

Retrieves the Policy Limit Days. This field contains the maximum number of days that the insurance policy will cover.

Returns:

NM - policyLimitDays

getPolicyNumber

public ST getPolicyNumber()

Retrieves the Policy Number. This field contains the individual policy number of the insured to uniquely identify this patient's plan.

Returns:

ST - policyNumber

getPreAdmitCert

public ST getPreAdmitCert()

Retrieves the Pre Admit Cert. This field contains the pre admission certification code.

Returns:

ST - preAdmitCert

getPriorInsurancePlanID

public CWE getPriorInsurancePlanID()

Retrieves the Prior Insurance Plan ID. This field uniquely identify the prior insurance plan when the plan ID changes.

Returns:

CWE - priorInsurancePlanID

getReleaseInformationCode

public CWE getReleaseInformationCode()

Retrieves the Release Information Code. This field indicates whether the healthcare provider can release information about the patient, and what information can be released.

Returns:

CWE - releaseInformationCode

getReportOfEligibilityDate

public DT getReportOfEligibilityDate()

Retrieves the Report Of Eligibility Date. This field indicates whether a report of eligibility (ROE) is received, and also indicates the date that it is received.

Returns:

DT - reportOfEligibilityDate

getReportOfEligibilityFlag

public ID getReportOfEligibilityFlag()

Retrieves the Report Of Eligibility Flag. This field indicates whether this insurance carrier sends a report that indicates that the patient is eligible for benefits and whether it identifies those benefits.

Returns:

ID - reportOfEligibilityFlag

getSetID_IN1

public SI getSetID_IN1()

Retrieves the Set ID IN1. This field contains the number that identify this transaction.

Returns:

SI - setID_IN1

getSignatureCode

public CWE getSignatureCode()

Retrieves the Signature Code. This field contains the code to indicate how the patient/subscriber authorization signature was obtained and how it is being retained by the provider.

Returns:

CWE - signatureCode

getSignatureCodeDate

public DT getSignatureCodeDate()

Retrieves the Signature Code Date. This date the patient/subscriber authorization signature is obtained.

Returns:

DT - signatureCodeDate

getTypeOfAgreementCode

public CWE getTypeOfAgreementCode()

Retrieves the Type Of Agreement Code. This field is used to further identify an insurance plan.

Returns:

CWE - typeOfAgreementCode

getVerificationBy

public ISingleCollection<XCN> getVerificationBy()

Retrieves the Verification By. This field refers to the person who verify the benefits.

Returns:

ISingleCollection - verificationBy

getVerificationDateTime

public DTM getVerificationDateTime()

Retrieves the Verification Date Time. This field contains the date/time that the healthcare provider verified that the patient has the indicated benefits.

Returns:

DTM - verificationDateTime

getVerificationStatus

public ST getVerificationStatus()

Retrieves the Verification Status. This field contains the status of this patient's relationship with this insurance carrier.

Returns:

ST - verificationStatus

getVIPIndicator

public CWE getVIPIndicator()

Retrieves the VIP Indicator. This field identify the type of VIP for the insured.

Returns:

CWE - vIPIndicator

getExternalHealthPlanIdentifiers

public ISingleCollection<CX> getExternalHealthPlanIdentifiers()

Retrieves the External Health Plan Identifiers. This field contains the external Health Plan Identifiers that correspond to the internal Health Plan ID in IN1-2 – Health Plan ID.

Returns:

ISingleCollection - External Health Plan Identifiers

getInsuranceActionCode

public ID getInsuranceActionCode()

Retrieves the Insurance Action Code. The Insurance Action Code Defines the action to be taken for this insurance.

Returns:

ID - InsuranceActionCode

setSetID_IN1

public void setSetID_IN1(java.lang.String strSetID_IN1)

Set the Set ID IN1. This field contains the number that identify this transaction.

Parameters:

strSetID_IN1 - This field contains the number that identifies transaction of IN1 segment.

setSetID_IN1

public void setSetID_IN1(SI objsetID_IN1)

Set the Set ID IN1. This field contains the number that identify this transaction.

Parameters:

objsetID_IN1 - This field contains the number that identifies transaction of IN1 segment.

setInsurancePlanID

public void setInsurancePlanID(java.lang.String strIdentifier,
                      java.lang.String strText,
                      java.lang.String strNameOfCodingSystem,
                      java.lang.String strAlternateIdentifier,
                      java.lang.String strAlternateText,
                      java.lang.String strNameOfAlternateCodingSystem,
                      java.lang.String strCodingSystemVersionID,
                      java.lang.String strAlternateCodingSystemVersionId,
                      java.lang.String strOriginalText,
                      java.lang.String strSecondAlternateIdentifier,
                      java.lang.String strSecondAlternateText,
                      java.lang.String strNameofSecondAlternateCodingSystem,
                      java.lang.String strSecondAlternateCodingSystemVersionID,
                      java.lang.String strCodingSystemOID,
                      java.lang.String strValueSetOID,
                      java.lang.String strValueSetVersionID,
                      java.lang.String strAlternateCodingSystemOID,
                      java.lang.String strAlternateValueSetOID,
                      java.lang.String strAlternateValueSetVersionID,
                      java.lang.String strSecondAlternateCodingSystemOID,
                      java.lang.String strSecondAlternateValueSetOID,
                      java.lang.String strSecondAlternateValueSetVersionID)

Set the Insurance Plan ID. This field contains a unique identifier for the insurance plan.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setInsurancePlanID

public void setInsurancePlanID(CWE insurancePlanID)

Set the Insurance Plan ID. This field contains a unique identifier for the insurance plan.

Parameters:

insurancePlanID -

addInsuranceCompanyID

public void addInsuranceCompanyID(java.lang.String strIDNumber,
                         java.lang.String strCheckDigit,
                         java.lang.String strCheckDigitScheme,
                         HD objAssigningAuthority,
                         java.lang.String strIdentifierTypeCode,
                         HD objAssigningFacility,
                         java.lang.String strEffectiveDate,
                         java.lang.String strExpirationDate,
                         CWE objAssigningJurisdiction,
                         CWE objAssigningAgencyOrDepartment,
                         java.lang.String strSecurityCheck,
                         java.lang.String strSecurityCheckScheme)

Set the Insurance Company ID. This field contains unique identifiers for the insurance company.

Parameters:

strIDNumber - Specifies the value of the identifier itself.

strCheckDigit - It is part of the identifying number used in the sending application.

strCheckDigitScheme - Contains the code identifying the check digit scheme employed. Suggested Values NP,ISO,M10,M11.[Refer table No.0061].

objAssigningAuthority - The assigning authority is a unique name of the system (or organization or agency or department) that creates the data. .

strIdentifierTypeCode - Specifies a code corresponding to the type of identifier.In some cases, this code may be used as a qualifier to the "Assigning authority" component.[Refer table No 0203]

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the patient.

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepartment - Specifies agency or department that assigned the identifier.

strSecurityCheck - is used to communicate the version code.

objSecurityCheckSCheme - is used to transmit information intended to validate veracity of the supplied identifier

addInsuranceCompanyID

public void addInsuranceCompanyID(CX InsuranceCompanyID)

Set the Insurance Company ID. This field contains unique identifiers for the insurance company.

Parameters:

InsuranceCompanyID -

setInsuranceCompanyID

public void setInsuranceCompanyID(ISingleCollection<CX> objInsuranceCompanyIDList)

Set the InsuranceCompanyID list.

Parameters:

objInsuranceCompanyIDList - List of InsuranceCompanyID

addInsuranceCompanyName

public void addInsuranceCompanyName(java.lang.String strOrganizationName,
                           CWE objOrganizationNameTypeCode,
                           HD objAssigningAuthority,
                           java.lang.String strIdentifierTypeCode,
                           HD objAssigningFacility,
                           java.lang.String strNameRepresentationCode,
                           java.lang.String strOrganizationIdentifier)

Set the Insurance Company Name. This field contains the name of the insurance company.

Parameters:

strOrganizationName - Specifies name of the specified organization.

strOrganizationNameTypeCode - Specifies a code that represents the type of name i.e., legal name, display name. Suggested Values A,L,D,SL.[Refer to table No.0204]

objAssigningAuthority - Specifies The assigning authority is a unique identifier of the system (or organization or agency or department) that creates the data.

strIdentifierTypeCode - Specifies a code corresponding to the type of identifier.

objAssigningFacility - Specifies The place or location identifier where the identifier was first assigned to the person.

strNameRepresentationCode - Specifies representations of the same name/address Suggested values are I,A,P [Refer table 0465]

strOrganizationIdentifier - This component contains the sequence of characters (the code) that uniquely identifies the item being referenced by XON.1 Organization Name. This component replaces XON.3 ID Number as of v 2.5.

addInsuranceCompanyName

public void addInsuranceCompanyName(XON InsuranceCompanyName)

Set the Insurance Company Name. This field contains the name of the insurance company.

Parameters:

InsuranceCompanyName -

setInsuranceCompanyName

public void setInsuranceCompanyName(ISingleCollection<XON> objInsuranceCompanyNameList)

Set the InsuranceCompanyName list.

Parameters:

objInsuranceCompanyNameList - List of InsuranceCompanyName

addInsuranceCompanyAddr

public void addInsuranceCompanyAddr(SAD objStreetAddress,
                           java.lang.String strOtherDesignation,
                           java.lang.String strCity,
                           java.lang.String strStateOrProvince,
                           java.lang.String strZipOrPostalCode,
                           java.lang.String strCountry,
                           java.lang.String strAddressType,
                           java.lang.String strOtherGeographicDesignation,
                           CWE objCountyParishCode,
                           CWE objCensusTract,
                           java.lang.String strAddressRepresentationCode,
                           DTM objEffectiveDate,
                           DTM objExpirationDate,
                           CWE objEXpirationReason,
                           java.lang.String strTemporaryIndicator,
                           java.lang.String strBadAddressIndicator,
                           java.lang.String strAddressUsage,
                           java.lang.String strAddressee,
                           java.lang.String strComment,
                           java.lang.String strPreferenceOrder,
                           CWE objProtectionCode,
                           EI objAddressIdentifier)

Set the Insurance Company Addr. This field contains the address of the insurance company.

Parameters:

objStreetAddress - Specifies the street address.

strOtherDesignation - Specifies the Second line of address.

strCity - The city, or district or place where the addressee is located.

strStateOrProvince - Specifies the state or province where the addressee is located.

strZipOrPostalCode - Specifies the zip or postal code where the addressee is located.

strCountry - Specifies the country where the addressee is located.

strAddressType - Specifies the kind or type of address.

strOtherGeographicDesignation - Specifies any other geographic designation.

objCountyParishCode - Specifies a code that represents the county in which the specified address resides.

objCensusTract - Specifies a code that represents the census tract in which the specified address resides.

strAddressRepresentationCode - Specifies representations of the same name/address Suggested values are I,A,P [Refer table 0465]

objEffectiveDate - It is The first date, if known, on which the address is valid and active.

objExpirationDate - It is The last date, if known, on which the address is valid and active.

objExpirationReason - indicates why this address was marked as ended.

strTemporaryIndicator - indicates whether address is considered temporary .

strBadAddressIndicator - indicates whether it is possible to contact the owning entity.

strAddressUsage - indicates how the address is intended to be used.

strAddressee - indicates the name of the person whose address is intended to be used.

strComment - indicated descriptive information

strPreferenceOrder - preference order

objProtectionCode - indicates that an address need to be protected

objAdressIdentifier - indicates a unique identifier for address

addInsuranceCompanyAddr

public void addInsuranceCompanyAddr(XAD InsuranceCompanyAddr)

Set the Insurance Company Addr. This field contains the address of the insurance company.

Parameters:

InsuranceCompanyAddr -

setInsuranceCompanyAddr

public void setInsuranceCompanyAddr(ISingleCollection<XAD> objInsuranceCompanyAddrList)

Set the InsuranceCompanyAddr list.

Parameters:

objInsuranceCompanyAddrList - List of InsuranceCompanyAddr

addInsuranceCoContactPerson

public void addInsuranceCoContactPerson(FN objFamilyName,
                               java.lang.String strGivenName,
                               java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof,
                               java.lang.String strSuffix,
                               java.lang.String strPrefix,
                               java.lang.String strNameTypeCode,
                               java.lang.String strNameRepresentationCode,
                               CWE objNameContext,
                               java.lang.String strNameAssemblyOrder,
                               DTM objEffectiveDate,
                               DTM objExpirationDate,
                               java.lang.String strProfessionalSuffix,
                               java.lang.String strCalledBy)

Set the Insurance Co Contact Person. This field contains the name of the person who should be contacted at the insurance company. Multiple names for the same contact person may be sent in this field.

Parameters:

objFamilyName - Specifies the surname of a person.

strGivenName - Specifies First name.

strSecondAndFurtherGivenNamesOrInitialsThereof - Specifies multiple middle names that may be included by separating them with spaces.

strSuffix - Used to specify a name suffix (e.g., Jr. or III).

strPrefix - Used to specify a name prefix (e.g., Dr.).

strNameTypeCode - Specifies a code that represents the type of name. Suggested values are A,B,C,D,I,L,M,N,P,R,S,T,U...[Refer table 0200.]

strNameRepresentationCode - Specifies representations of the same name/address Suggested values are I,A,P [Refer table 0465]

objNameContext - Designates the context in which a name is used. [Refer User-defined Table 0448 ]

strNameAssemblyOrder - Specifies a code that represents the preferred display order of the components of this person name. Suggested values are G,F[Refer table 0444.]

objEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

objExpirationDate - Specifies the last date, if known, on which the address is valid and active.

strProfessionalSuffix - Used to specify an abbreviation, or a string of abbreviations, denoting qualifications that support the person's profession, (e.g., licenses).

strCalledBy - Used to specify the called name.

addInsuranceCoContactPerson

public void addInsuranceCoContactPerson(XPN InsuranceCoContactPerson)

Set the Insurance Co Contact Person. This field contains the name of the person who should be contacted at the insurance company. Multiple names for the same contact person may be sent in this field.

Parameters:

InsuranceCoContactPerson -

setInsuranceCoContactPerson

public void setInsuranceCoContactPerson(ISingleCollection<XPN> objInsuranceCoContactPersonList)

Set the InsuranceCoContactPerson list.

Parameters:

objInsuranceCoContactPersonList - List of InsuranceCoContactPerson

addInsuranceCoPhoneNumber

public void addInsuranceCoPhoneNumber(java.lang.String strTeleCommunicationUseCode,
                             java.lang.String strTeleCommunicationEquipmentType,
                             java.lang.String strCommuinicationAddress,
                             java.lang.String strCountryCode,
                             java.lang.String strAreaCityCode,
                             java.lang.String strLocalNumber,
                             java.lang.String strExtension,
                             java.lang.String strAnyText,
                             java.lang.String strExtensionPrefix,
                             java.lang.String strSpeedDialCode,
                             java.lang.String strUnformattedTelephoneNumber,
                             java.lang.String strEffectiveStartDate,
                             java.lang.String strExpirationDate,
                             CWE objExpirationReason,
                             CWE objProtectionCode,
                             EI objSharedTelecommunicationIdentifier,
                             java.lang.String strPreferenceOrder)

Set the Insurance Co Phone Number. This field contains the phone number of the insurance company. Multiple phone numbers for the same insurance company may be sent in this field.

Parameters:

strTeleCommunicationUseCode - Specifies a code that represents a specific use of a telecommunication number. Suggested values are PRN,ORN,WPN,VHN,ASN,EMR,NET,BPN [Refer table 0201.]

strTeleCommunicationEquipmentType - Specifies a code that represents the type of telecommunication equipment. Suggested values are PH,FX,MD,CP,BP,Internet,X.400,TDD,TTY [Refer table 0202.]

strCommuinicationAddress - Specifies Email address.

strCountryCode - Specifies the Country code.

strAreaCityCode - Specifies the area /City Code.

strLocalNumber - Specifies an Local Number.

strExtension - Specifies an Extension.

strAnyText - Contains comments with respect to the telephone number.

strExtensionPrefix - Specifies the characters established within a company's internal telephone system network used as a prefix to the Extension component for internal dialing.

strSpeedDialCode - Specifies The characters established within a company's internal telephone system used in place of the (external) telephone number.

strUnformattedTelephoneNumber - Specifies an expression of the telephone number as an unparsible string.

strEffectiveStartDate - Specifies start date.

strExpirationDate - Specifies expiration date.

objExpirationReason - Specifies reason why this contact is marked as ended.

objProtectionCode - Specifies reason why this information is sensitive or protected.

objSharedTelecommunicationIdentifier - Specifies a unique phone number phone telephone number or email-id.

strPreferenceOrder - Specifies the preference order for an entity..

addInsuranceCoPhoneNumber

public void addInsuranceCoPhoneNumber(XTN InsuranceCoPhoneNumber)

Set the Insurance Co Phone Number. This field contains the phone number of the insurance company. Multiple phone numbers for the same insurance company may be sent in this field.

Parameters:

InsuranceCoPhoneNumber -

setInsuranceCoPhoneNumber

public void setInsuranceCoPhoneNumber(ISingleCollection<XTN> objInsuranceCoPhoneNumberList)

Set the InsuranceCoPhoneNumber list.

Parameters:

objInsuranceCoPhoneNumberList - List of InsuranceCoPhoneNumber

setGroupNumber

public void setGroupNumber(java.lang.String strGroupNumber)

Set the Group Number. This field contains the group number of the insured's insurance.

Parameters:

strGroupNumber - Specifies the group number of the insured's insurance.

setGroupNumber

public void setGroupNumber(ST objgroupNumber)

Set the Group Number. This field contains the group number of the insured's insurance.

Parameters:

objgroupNumber - Specifies the group number of the insured's insurance.

addGroupName

public void addGroupName(java.lang.String strOrganizationName,
                CWE objOrganizationNameTypeCode,
                HD objAssigningAuthority,
                java.lang.String strIdentifierTypeCode,
                HD objAssigningFacility,
                java.lang.String strNameRepresentationCode,
                java.lang.String strOrganizationIdentifier)

Set the Group Name. This field contains the group name of the insured's insurance.

Parameters:

strOrganizationName - Specifies name of the specified organization.

strOrganizationNameTypeCode - Specifies a code that represents the type of name i.e., legal name, display name. Suggested Values A,L,D,SL.[Refer to table No.0204]

objAssigningAuthority - Specifies The assigning authority is a unique identifier of the system (or organization or agency or department) that creates the data.

strIdentifierTypeCode - Specifies a code corresponding to the type of identifier.

objAssigningFacility - Specifies The place or location identifier where the identifier was first assigned to the person.

strNameRepresentationCode - Specifies representations of the same name/address Suggested values are I,A,P [Refer table 0465]

strOrganizationIdentifier - This component contains the sequence of characters (the code) that uniquely identifies the item being referenced by XON.1 Organization Name. This component replaces XON.3 ID Number as of v 2.5.

addGroupName

public void addGroupName(XON GroupName)

Set the Group Name. This field contains the group name of the insured's insurance.

Parameters:

GroupName -

setGroupName

public void setGroupName(ISingleCollection<XON> objGroupNameList)

Set the GroupName list.

Parameters:

objGroupNameList - List of GroupName

addInsuredGroupEmpID

public void addInsuredGroupEmpID(java.lang.String strIDNumber,
                        java.lang.String strCheckDigit,
                        java.lang.String strCheckDigitScheme,
                        HD objAssigningAuthority,
                        java.lang.String strIdentifierTypeCode,
                        HD objAssigningFacility,
                        java.lang.String strEffectiveDate,
                        java.lang.String strExpirationDate,
                        CWE objAssigningJurisdiction,
                        CWE objAssigningAgencyOrDepartment,
                        java.lang.String strSecurityCheck,
                        java.lang.String strSecurityCheckScheme)

Set the Insured Group Emp ID. This field holds the group employer ID for the insured's insurance.

Parameters:

strIDNumber - Specifies the value of the identifier itself.

strCheckDigit - It is part of the identifying number used in the sending application.

strCheckDigitScheme - Contains the code identifying the check digit scheme employed. Suggested Values NP,ISO,M10,M11.[Refer table No.0061].

objAssigningAuthority - The assigning authority is a unique name of the system (or organization or agency or department) that creates the data. .

strIdentifierTypeCode - Specifies a code corresponding to the type of identifier.In some cases, this code may be used as a qualifier to the "Assigning authority" component.[Refer table No 0203]

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the patient.

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepartment - Specifies agency or department that assigned the identifier.

strSecurityCheck - is used to communicate the version code.

objSecurityCheckSCheme - is used to transmit information intended to validate veracity of the supplied identifier

addInsuredGroupEmpID

public void addInsuredGroupEmpID(CX objInsuredGroupEmpID)

Set the Insured Group Emp ID. This field holds the group employer ID for the insured's insurance.

Parameters:

strIDNumber - Specifies the value of the identifier itself.

strCheckDigit - It is part of the identifying number used in the sending application.

strCheckDigitScheme - Contains the code identifying the check digit scheme employed. Suggested Values NP,ISO,M10,M11.[Refer table No.0061].

objAssigningAuthority - The assigning authority is a unique name of the system (or organization or agency or department) that creates the data. .

strIdentifierTypeCode - Specifies a code corresponding to the type of identifier.In some cases, this code may be used as a qualifier to the "Assigning authority" component.[Refer table No 0203]

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the patient.

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepartment - Specifies agency or department that assigned the identifier.

setInsuredGroupEmpID

public void setInsuredGroupEmpID(ISingleCollection<CX> objInsuredGroupEmpIDList)

Set the InsuredGroupEmpID list.

Parameters:

objInsuredGroupEmpIDList - List of InsuredGroupEmpID

addInsuredGroupEmpName

public void addInsuredGroupEmpName(java.lang.String strOrganizationName,
                          CWE objOrganizationNameTypeCode,
                          HD objAssigningAuthority,
                          java.lang.String strIdentifierTypeCode,
                          HD objAssigningFacility,
                          java.lang.String strNameRepresentationCode,
                          java.lang.String strOrganizationIdentifier)

Set the Insured Group Emp Name. This field contains the name of the employer that provides the employee's insurance.

Parameters:

strOrganizationName - Specifies name of the specified organization.

strOrganizationNameTypeCode - Specifies a code that represents the type of name i.e., legal name, display name. Suggested Values A,L,D,SL.[Refer to table No.0204]

objAssigningAuthority - Specifies The assigning authority is a unique identifier of the system (or organization or agency or department) that creates the data.

strIdentifierTypeCode - Specifies a code corresponding to the type of identifier.

objAssigningFacility - Specifies The place or location identifier where the identifier was first assigned to the person.

strNameRepresentationCode - Specifies representations of the same name/address Suggested values are I,A,P [Refer table 0465]

strOrganizationIdentifier - This component contains the sequence of characters (the code) that uniquely identifies the item being referenced by XON.1 Organization Name. This component replaces XON.3 ID Number as of v 2.5.

addInsuredGroupEmpName

public void addInsuredGroupEmpName(XON InsuredGroupEmpName)

Set the Insured Group Emp Name. This field contains the name of the employer that provides the employee's insurance.

Parameters:

InsuredGroupEmpName -

setInsuredGroupEmpName

public void setInsuredGroupEmpName(ISingleCollection<XON> objInsuredGroupEmpNameList)

Set the InsuredGroupEmpName list.

Parameters:

objGuarantorAddressList - List of InsuredGroupEmpName

setPlanEffectiveDate

public void setPlanEffectiveDate(java.lang.String strPlanEffectiveDate)

Set the Plan Effective Date. This field contains the date that the insurance goes into effect.

Parameters:

strPlanEffectiveDate - Specifies date that the insurance goes into effect.

setPlanEffectiveDate

public void setPlanEffectiveDate(DT objplanEffectiveDate)

Set the Plan Effective Date. This field contains the date that the insurance goes into effect.

Parameters:

objplanEffectiveDate - Specifies date that the insurance goes into effect.

setPlanExpirationDate

public void setPlanExpirationDate(java.lang.String strPlanExpirationDate)

Set the Plan Expiration Date. This indicates the last date of service that the insurance will cover or be responsible for.

Parameters:

strPlanExpirationDate - Specifies last date of service that the insurance will cover or be responsible for.

setPlanExpirationDate

public void setPlanExpirationDate(DT objplanExpirationDate)

Set the Plan Expiration Date. This indicates the last date of service that the insurance will cover or be responsible for.

Parameters:

objplanExpirationDate - Specifies last date of service that the insurance will cover or be responsible for.

setAuthorizationInformation

public void setAuthorizationInformation(java.lang.String strAuthorizationNumber,
                               java.lang.String strDate,
                               java.lang.String strSource)

Set the Authorization Information. This field specify the authorization number or code be obtained prior to all non-emergency admissions, and within 48 hours of an emergency admission.

Parameters:

strAuthorizationNumber - Specifies Identifier assigned to the authorization.

strDate - Specifies Date of authorization.

strSource - Specifies Source of authorization.

setAuthorizationInformation

public void setAuthorizationInformation(AUI authorizationInformation)

Set the Authorization Information. This field specify the authorization number or code be obtained prior to all non-emergency admissions, and within 48 hours of an emergency admission.

Parameters:

authorizationInformation -

setAssignmentOfBenefits

public void setAssignmentOfBenefits(java.lang.String strIdentifier,
                           java.lang.String strText,
                           java.lang.String strNameOfCodingSystem,
                           java.lang.String strAlternateIdentifier,
                           java.lang.String strAlternateText,
                           java.lang.String strNameOfAlternateCodingSystem,
                           java.lang.String strCodingSystemVersionID,
                           java.lang.String strAlternateCodingSystemVersionId,
                           java.lang.String strOriginalText,
                           java.lang.String strSecondAlternateIdentifier,
                           java.lang.String strSecondAlternateText,
                           java.lang.String strNameofSecondAlternateCodingSystem,
                           java.lang.String strSecondAlternateCodingSystemVersionID,
                           java.lang.String strCodingSystemOID,
                           java.lang.String strValueSetOID,
                           java.lang.String strValueSetVersionID,
                           java.lang.String strAlternateCodingSystemOID,
                           java.lang.String strAlternateValueSetOID,
                           java.lang.String strAlternateValueSetVersionID,
                           java.lang.String strSecondAlternateCodingSystemOID,
                           java.lang.String strSecondAlternateValueSetOID,
                           java.lang.String strSecondAlternateValueSetVersionID)

Set the Assignment Of Benefits. This field indicates whether the insured agreed to assign the insurance benefits to the healthcare provider or not.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setAssignmentOfBenefits

public void setAssignmentOfBenefits(CWE objassignmentOfBenefits)

Set the Assignment Of Benefits. This field indicates whether the insured agreed to assign the insurance benefits to the healthcare provider or not.

Parameters:

strAssignmentOfBenefits - Specifies whether the insured agreed to assign the insurance benefits to the healthcare provider.[Refer to User-defined Table 0135 ].Suggested values. Y,N,M

setBillingStatus

public void setBillingStatus(java.lang.String strIdentifier,
                    java.lang.String strText,
                    java.lang.String strNameOfCodingSystem,
                    java.lang.String strAlternateIdentifier,
                    java.lang.String strAlternateText,
                    java.lang.String strNameOfAlternateCodingSystem,
                    java.lang.String strCodingSystemVersionID,
                    java.lang.String strAlternateCodingSystemVersionId,
                    java.lang.String strOriginalText,
                    java.lang.String strSecondAlternateIdentifier,
                    java.lang.String strSecondAlternateText,
                    java.lang.String strNameofSecondAlternateCodingSystem,
                    java.lang.String strSecondAlternateCodingSystemVersionID,
                    java.lang.String strCodingSystemOID,
                    java.lang.String strValueSetOID,
                    java.lang.String strValueSetVersionID,
                    java.lang.String strAlternateCodingSystemOID,
                    java.lang.String strAlternateValueSetOID,
                    java.lang.String strAlternateValueSetVersionID,
                    java.lang.String strSecondAlternateCodingSystemOID,
                    java.lang.String strSecondAlternateValueSetOID,
                    java.lang.String strSecondAlternateValueSetVersionID)

Set the Billing Status. This field indicates whether the particular insurance has been billed and, if so, the type of bill.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setBillingStatus

public void setBillingStatus(CWE objbillingStatus)

Set the Billing Status. This field indicates whether the particular insurance has been billed and, if so, the type of bill.

Parameters:

objbillingStatus - Specifies This field indicates whether the particular insurance has been billed and, if so, the type of bill. Refer to User-defined Table 0022 - Billing Status for suggested values.

setCompanyPlanCode

public void setCompanyPlanCode(java.lang.String strIdentifier,
                      java.lang.String strText,
                      java.lang.String strNameOfCodingSystem,
                      java.lang.String strAlternateIdentifier,
                      java.lang.String strAlternateText,
                      java.lang.String strNameOfAlternateCodingSystem,
                      java.lang.String strCodingSystemVersionID,
                      java.lang.String strAlternateCodingSystemVersionId,
                      java.lang.String strOriginalText,
                      java.lang.String strSecondAlternateIdentifier,
                      java.lang.String strSecondAlternateText,
                      java.lang.String strNameofSecondAlternateCodingSystem,
                      java.lang.String strSecondAlternateCodingSystemVersionID,
                      java.lang.String strCodingSystemOID,
                      java.lang.String strValueSetOID,
                      java.lang.String strValueSetVersionID,
                      java.lang.String strAlternateCodingSystemOID,
                      java.lang.String strAlternateValueSetOID,
                      java.lang.String strAlternateValueSetVersionID,
                      java.lang.String strSecondAlternateCodingSystemOID,
                      java.lang.String strSecondAlternateValueSetOID,
                      java.lang.String strSecondAlternateValueSetVersionID)

Set the Company Plan Code. This field contains optional information to further define the data in IN1-3 - Insurance Company ID.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setCompanyPlanCode

public void setCompanyPlanCode(CWE objcompanyPlanCode)

Set the Company Plan Code. This field contains optional information to further define the data in IN1-3 - Insurance Company ID.

Parameters:

objcompanyPlanCode - Specifies optional information to further define the data in IN1-3 - Insurance Company ID. [Refer to User-defined Table 0042] No Suggested Values.

setCoordOfBenefits

public void setCoordOfBenefits(java.lang.String strIdentifier,
                      java.lang.String strText,
                      java.lang.String strNameOfCodingSystem,
                      java.lang.String strAlternateIdentifier,
                      java.lang.String strAlternateText,
                      java.lang.String strNameOfAlternateCodingSystem,
                      java.lang.String strCodingSystemVersionID,
                      java.lang.String strAlternateCodingSystemVersionId,
                      java.lang.String strOriginalText,
                      java.lang.String strSecondAlternateIdentifier,
                      java.lang.String strSecondAlternateText,
                      java.lang.String strNameofSecondAlternateCodingSystem,
                      java.lang.String strSecondAlternateCodingSystemVersionID,
                      java.lang.String strCodingSystemOID,
                      java.lang.String strValueSetOID,
                      java.lang.String strValueSetVersionID,
                      java.lang.String strAlternateCodingSystemOID,
                      java.lang.String strAlternateValueSetOID,
                      java.lang.String strAlternateValueSetVersionID,
                      java.lang.String strSecondAlternateCodingSystemOID,
                      java.lang.String strSecondAlternateValueSetOID,
                      java.lang.String strSecondAlternateValueSetVersionID)

Set the Coord Of Benefits. This field indicates whether this insurance works in conjunction with other insurance plans, or if it provides independent coverage and payment of benefits regardless of other insurance that might be available to the patient.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setCoordOfBenefits

public void setCoordOfBenefits(CWE objcoordOfBenefits)

Set the Coord Of Benefits. This field indicates whether this insurance works in conjunction with other insurance plans, or if it provides independent coverage and payment of benefits regardless of other insurance that might be available to the patient.

Parameters:

objcoordOfBenefits - Specifies : This field indicates whether this insurance works in conjunction with other insurance plans, or if it provides independent coverage and payment of benefits regardless of other insurance that might be available to the patient.[Refer to User-defined Table 0173].Suggested Values CO,IN.

setCoordOfBenPriority

public void setCoordOfBenPriority(java.lang.String strCoordOfBenPriority)

Set the Coord Of Ben Priority. This field contains priority sequence.

Parameters:

strCoordOfBenPriority - Specifies priority sequence. Values are: 1, 2, 3, etc.

setCoordOfBenPriority

public void setCoordOfBenPriority(ST objcoordOfBenPriority)

Set the Coord Of Ben Priority. This field contains priority sequence.

Parameters:

objcoordOfBenPriority - Specifies priority sequence. Values are: 1, 2, 3, etc.

setCoverageType

public void setCoverageType(java.lang.String strIdentifier,
                   java.lang.String strText,
                   java.lang.String strNameOfCodingSystem,
                   java.lang.String strAlternateIdentifier,
                   java.lang.String strAlternateText,
                   java.lang.String strNameOfAlternateCodingSystem,
                   java.lang.String strCodingSystemVersionID,
                   java.lang.String strAlternateCodingSystemVersionId,
                   java.lang.String strOriginalText,
                   java.lang.String strSecondAlternateIdentifier,
                   java.lang.String strSecondAlternateText,
                   java.lang.String strNameofSecondAlternateCodingSystem,
                   java.lang.String strSecondAlternateCodingSystemVersionID,
                   java.lang.String strCodingSystemOID,
                   java.lang.String strValueSetOID,
                   java.lang.String strValueSetVersionID,
                   java.lang.String strAlternateCodingSystemOID,
                   java.lang.String strAlternateValueSetOID,
                   java.lang.String strAlternateValueSetVersionID,
                   java.lang.String strSecondAlternateCodingSystemOID,
                   java.lang.String strSecondAlternateValueSetOID,
                   java.lang.String strSecondAlternateValueSetVersionID)

Set the Coverage Type. This field contains the coding structure that identify the type of insurance coverage, or what types of services are covered for the purposes of a billing system.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setCoverageType

public void setCoverageType(CWE objcoverageType)

Set the Coverage Type. This field contains the coding structure that identify the type of insurance coverage, or what types of services are covered for the purposes of a billing system.

Parameters:

objcoverageType - Specifies the coding structure that identifies the type of insurance coverage, or what types of services are covered for the purposes of a billing system.[Refer to User-defined Table 0309 - Coverage Type].suggested values - H,P,B.

setDelayBeforeLRDay

public void setDelayBeforeLRDay(java.lang.String strDelayBeforeLRDay)

Set the Delay Before LR Day. This field indicates the delay before lifetime reserve days.

Parameters:

strDelayBeforeLRDay - Specifies the delay before lifetime reserve days.

setDelayBeforeLRDay

public void setDelayBeforeLRDay(NM objdelayBeforeLRDay)

Set the Delay Before LR Day. This field indicates the delay before lifetime reserve days.

Parameters:

objdelayBeforeLRDay - Specifies the delay before lifetime reserve days.

setHandicap

public void setHandicap(java.lang.String strIdentifier,
               java.lang.String strText,
               java.lang.String strNameOfCodingSystem,
               java.lang.String strAlternateIdentifier,
               java.lang.String strAlternateText,
               java.lang.String strNameOfAlternateCodingSystem,
               java.lang.String strCodingSystemVersionID,
               java.lang.String strAlternateCodingSystemVersionId,
               java.lang.String strOriginalText,
               java.lang.String strSecondAlternateIdentifier,
               java.lang.String strSecondAlternateText,
               java.lang.String strNameofSecondAlternateCodingSystem,
               java.lang.String strSecondAlternateCodingSystemVersionID,
               java.lang.String strCodingSystemOID,
               java.lang.String strValueSetOID,
               java.lang.String strValueSetVersionID,
               java.lang.String strAlternateCodingSystemOID,
               java.lang.String strAlternateValueSetOID,
               java.lang.String strAlternateValueSetVersionID,
               java.lang.String strSecondAlternateCodingSystemOID,
               java.lang.String strSecondAlternateValueSetOID,
               java.lang.String strSecondAlternateValueSetVersionID)

Set the Handicap. This field contains a code to describe the insured's disability.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setHandicap

public void setHandicap(CWE objhandicap)

Set the Handicap. This field contains a code to describe the insured's disability.

Parameters:

objhandicap - This field contains the code that describes an associated party's disability. No suggested values defined [User-defined Table 0295].

addInsuredAddr

public void addInsuredAddr(SAD objStreetAddress,
                  java.lang.String strOtherDesignation,
                  java.lang.String strCity,
                  java.lang.String strStateOrProvince,
                  java.lang.String strZipOrPostalCode,
                  java.lang.String strCountry,
                  java.lang.String strAddressType,
                  java.lang.String strOtherGeographicDesignation,
                  CWE objCountyParishCode,
                  CWE objCensusTract,
                  java.lang.String strAddressRepresentationCode,
                  DTM objEffectiveDate,
                  DTM objExpirationDate,
                  CWE objEXpirationReason,
                  java.lang.String strTemporaryIndicator,
                  java.lang.String strBadAddressIndicator,
                  java.lang.String strAddressUsage,
                  java.lang.String strAddressee,
                  java.lang.String strComment,
                  java.lang.String strPreferenceOrder,
                  CWE objProtectionCode,
                  EI objAddressIdentifier)

Set the Insured Addr. This field contains the address of the insured person.

Parameters:

objStreetAddress - Specifies the street address.

strOtherDesignation - Specifies the Second line of address.

strCity - The city, or district or place where the addressee is located.

strStateOrProvince - Specifies the state or province where the addressee is located.

strZipOrPostalCode - Specifies the zip or postal code where the addressee is located.

strCountry - Specifies the country where the addressee is located.

strAddressType - Specifies the kind or type of address.

strOtherGeographicDesignation - Specifies any other geographic designation.

objCountyParishCode - Specifies a code that represents the county in which the specified address resides.

objCensusTract - Specifies a code that represents the census tract in which the specified address resides.

strAddressRepresentationCode - Specifies representations of the same name/address Suggested values are I,A,P [Refer table 0465]

objEffectiveDate - It is The first date, if known, on which the address is valid and active.

objExpirationDate - It is The last date, if known, on which the address is valid and active.

objExpirationReason - indicates why this address was marked as ended.

strTemporaryIndicator - indicates whether address is considered temporary .

strBadAddressIndicator - indicates whether it is possible to contact the owning entity.

strAddressUsage - indicates how the address is intended to be used.

strAddressee - indicates the name of the person whose address is intended to be used.

strComment - indicated descriptive information

strPreferenceOrder - preference order

objProtectionCode - indicates that an address need to be protected

objAdressIdentifier - indicates a unique identifier for address

addInsuredAddr

public void addInsuredAddr(XAD InsuredAddr)

Set the Insured Addr. This field contains the address of the insured person.

Parameters:

InsuredAddr -

setInsuredAddr

public void setInsuredAddr(ISingleCollection<XAD> objInsuredAddrList)

Set the InsuredAddr list.

Parameters:

objInsuredAddrList - List of InsuredAddr

setInsuredAdministrativeSex

public void setInsuredAdministrativeSex(java.lang.String strIdentifier,
                               java.lang.String strText,
                               java.lang.String strNameOfCodingSystem,
                               java.lang.String strAlternateIdentifier,
                               java.lang.String strAlternateText,
                               java.lang.String strNameOfAlternateCodingSystem,
                               java.lang.String strCodingSystemVersionID,
                               java.lang.String strAlternateCodingSystemVersionId,
                               java.lang.String strOriginalText,
                               java.lang.String strSecondAlternateIdentifier,
                               java.lang.String strSecondAlternateText,
                               java.lang.String strNameofSecondAlternateCodingSystem,
                               java.lang.String strSecondAlternateCodingSystemVersionID,
                               java.lang.String strCodingSystemOID,
                               java.lang.String strValueSetOID,
                               java.lang.String strValueSetVersionID,
                               java.lang.String strAlternateCodingSystemOID,
                               java.lang.String strAlternateValueSetOID,
                               java.lang.String strAlternateValueSetVersionID,
                               java.lang.String strSecondAlternateCodingSystemOID,
                               java.lang.String strSecondAlternateValueSetOID,
                               java.lang.String strSecondAlternateValueSetVersionID)

Set the Insured Administrative Sex. This field contains the gender of the insured.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setInsuredAdministrativeSex

public void setInsuredAdministrativeSex(CWE objinsuredAdministrativeSex)

Set the Insured Administrative Sex. This field contains the gender of the insured.

Parameters:

objinsuredAdministrativeSex - Specifies : This field contains the gender of the insured.[Refer to User-defined Table 0001].

setInsuredBirthPlace

public void setInsuredBirthPlace(java.lang.String strInsuredBirthPlace)

Set the Insured Birth Place. This field contains the description of the insured's birth place.

Parameters:

strInsuredBirthPlace - Specifies the description of the insured's birth place.

setInsuredBirthPlace

public void setInsuredBirthPlace(ST objinsuredBirthPlace)

Set the Insured Birth Place. This field contains the description of the insured's birth place.

Parameters:

objinsuredBirthPlace - Specifies the description of the insured's birth place.

setInsuredDOB

public void setInsuredDOB(java.lang.String strTime)

Set the Insured DOB. This field contains the date of birth of the insured.

Parameters:

strTime - Specifies a point in time using a 24-hour clock notation.

setInsuredDOB

public void setInsuredDOB(DTM insuredDOB)

Set the Insured DOB. This field contains the date of birth of the insured.

Parameters:

insuredDOB -

addInsuredEmployerAddr

public void addInsuredEmployerAddr(SAD objStreetAddress,
                          java.lang.String strOtherDesignation,
                          java.lang.String strCity,
                          java.lang.String strStateOrProvince,
                          java.lang.String strZipOrPostalCode,
                          java.lang.String strCountry,
                          java.lang.String strAddressType,
                          java.lang.String strOtherGeographicDesignation,
                          CWE objCountyParishCode,
                          CWE objCensusTract,
                          java.lang.String strAddressRepresentationCode,
                          DTM objEffectiveDate,
                          DTM objExpirationDate,
                          CWE objEXpirationReason,
                          java.lang.String strTemporaryIndicator,
                          java.lang.String strBadAddressIndicator,
                          java.lang.String strAddressUsage,
                          java.lang.String strAddressee,
                          java.lang.String strComment,
                          java.lang.String strPreferenceOrder,
                          CWE objProtectionCode,
                          EI objAddressIdentifier)

Set the Insured Employer Addr. This field contains the address of the insured employee's employer.

Parameters:

objStreetAddress - Specifies the street address.

strOtherDesignation - Specifies the Second line of address.

strCity - The city, or district or place where the addressee is located.

strStateOrProvince - Specifies the state or province where the addressee is located.

strZipOrPostalCode - Specifies the zip or postal code where the addressee is located.

strCountry - Specifies the country where the addressee is located.

strAddressType - Specifies the kind or type of address.

strOtherGeographicDesignation - Specifies any other geographic designation.

objCountyParishCode - Specifies a code that represents the county in which the specified address resides.

objCensusTract - Specifies a code that represents the census tract in which the specified address resides.

strAddressRepresentationCode - Specifies representations of the same name/address Suggested values are I,A,P [Refer table 0465]

objEffectiveDate - It is The first date, if known, on which the address is valid and active.

objExpirationDate - It is The last date, if known, on which the address is valid and active.

objExpirationReason - indicates why this address was marked as ended.

strTemporaryIndicator - indicates whether address is considered temporary .

strBadAddressIndicator - indicates whether it is possible to contact the owning entity.

strAddressUsage - indicates how the address is intended to be used.

strAddressee - indicates the name of the person whose address is intended to be used.

strComment - indicated descriptive information

strPreferenceOrder - preference order

objProtectionCode - indicates that an address need to be protected

objAdressIdentifier - indicates a unique identifier for address

addInsuredEmployerAddr

public void addInsuredEmployerAddr(XAD InsuredEmployerAddr)

Set the Insured Employer Addr. This field contains the address of the insured employee's employer.

Parameters:

InsuredEmployerAddr -

setInsuredEmployerAddr

public void setInsuredEmployerAddr(ISingleCollection<XAD> objInsuredEmployerAddrList)

Set the InsuredEmployerAddr list.

Parameters:

objInsuredEmployerAddrList - List of InsuredEmployerAddr

setInsuredEmploymentStatus

public void setInsuredEmploymentStatus(java.lang.String strIdentifier,
                              java.lang.String strText,
                              java.lang.String strNameOfCodingSystem,
                              java.lang.String strAlternateIdentifier,
                              java.lang.String strAlternateText,
                              java.lang.String strNameOfAlternateCodingSystem,
                              java.lang.String strCodingSystemVersionID,
                              java.lang.String strAlternateCodingSystemVersionId,
                              java.lang.String strOriginalText,
                              java.lang.String strSecondAlternateIdentifier,
                              java.lang.String strSecondAlternateText,
                              java.lang.String strNameofSecondAlternateCodingSystem,
                              java.lang.String strSecondAlternateCodingSystemVersionID,
                              java.lang.String strCodingSystemOID,
                              java.lang.String strValueSetOID,
                              java.lang.String strValueSetVersionID,
                              java.lang.String strAlternateCodingSystemOID,
                              java.lang.String strAlternateValueSetOID,
                              java.lang.String strAlternateValueSetVersionID,
                              java.lang.String strSecondAlternateCodingSystemOID,
                              java.lang.String strSecondAlternateValueSetOID,
                              java.lang.String strSecondAlternateValueSetVersionID)

Set the Insured Employment Status. This field holds the employment status of the insured.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setInsuredEmploymentStatus

public void setInsuredEmploymentStatus(CWE insuredEmploymentStatus)

Set the Insured Employment Status. This field holds the employment status of the insured.

Parameters:

insuredEmploymentStatus -

addInsuredIDNumber

public void addInsuredIDNumber(java.lang.String strIDNumber,
                      java.lang.String strCheckDigit,
                      java.lang.String strCheckDigitScheme,
                      HD objAssigningAuthority,
                      java.lang.String strIdentifierTypeCode,
                      HD objAssigningFacility,
                      java.lang.String strEffectiveDate,
                      java.lang.String strExpirationDate,
                      CWE objAssigningJurisdiction,
                      CWE objAssigningAgencyOrDepartment,
                      java.lang.String strSecurityCheck,
                      java.lang.String strSecurityCheckScheme)

Set the Insured ID Number. This field data element contains a healthcare institution's identifiers for the insured.

Parameters:

strIDNumber - Specifies the value of the identifier itself.

strCheckDigit - It is part of the identifying number used in the sending application.

strCheckDigitScheme - Contains the code identifying the check digit scheme employed. Suggested Values NP,ISO,M10,M11.[Refer table No.0061].

objAssigningAuthority - The assigning authority is a unique name of the system (or organization or agency or department) that creates the data. .

strIdentifierTypeCode - Specifies a code corresponding to the type of identifier.In some cases, this code may be used as a qualifier to the "Assigning authority" component.[Refer table No 0203]

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the patient.

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepartment - Specifies agency or department that assigned the identifier.

strSecurityCheck - is used to communicate the version code.

objSecurityCheckSCheme - is used to transmit information intended to validate veracity of the supplied identifier

addInsuredIDNumber

public void addInsuredIDNumber(CX InsuredIDNumber)

Set the Insured ID Number. This field data element contains a healthcare institution's identifiers for the insured.

Parameters:

InsuredIDNumber -

setInsuredIDNumber

public void setInsuredIDNumber(ISingleCollection<CX> objInsuredIDNumberList)

Set the InsuredIDNumber list.

Parameters:

objInsuredIDNumberList - List of InsuredIDNumber

setInsuredRelationshipToPatient

public void setInsuredRelationshipToPatient(java.lang.String strIdentifier,
                                   java.lang.String strText,
                                   java.lang.String strNameOfCodingSystem,
                                   java.lang.String strAlternateIdentifier,
                                   java.lang.String strAlternateText,
                                   java.lang.String strNameOfAlternateCodingSystem,
                                   java.lang.String strCodingSystemVersionID,
                                   java.lang.String strAlternateCodingSystemVersionId,
                                   java.lang.String strOriginalText,
                                   java.lang.String strSecondAlternateIdentifier,
                                   java.lang.String strSecondAlternateText,
                                   java.lang.String strNameofSecondAlternateCodingSystem,
                                   java.lang.String strSecondAlternateCodingSystemVersionID,
                                   java.lang.String strCodingSystemOID,
                                   java.lang.String strValueSetOID,
                                   java.lang.String strValueSetVersionID,
                                   java.lang.String strAlternateCodingSystemOID,
                                   java.lang.String strAlternateValueSetOID,
                                   java.lang.String strAlternateValueSetVersionID,
                                   java.lang.String strSecondAlternateCodingSystemOID,
                                   java.lang.String strSecondAlternateValueSetOID,
                                   java.lang.String strSecondAlternateValueSetVersionID)

Set the Insured Relationship To Patient. This field indicates the insured's relationship to the patient.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setInsuredRelationshipToPatient

public void setInsuredRelationshipToPatient(CWE insuredRelationshipToPatient)

Set the Insured Relationship To Patient. This field indicates the insured's relationship to the patient.

Parameters:

insuredRelationshipToPatient -

setLifetimeReserveDays

public void setLifetimeReserveDays(java.lang.String strLifetimeReserveDays)

Set the Lifetime Reserve Days. This field contains the number of days left for a certain service to be provided or covered under an insurance policy.

Parameters:

strLifetimeReserveDays - Specifies the number of days left for a certain service to be provided or covered under an insurance policy.

setLifetimeReserveDays

public void setLifetimeReserveDays(NM objlifetimeReserveDays)

Set the Lifetime Reserve Days. This field contains the number of days left for a certain service to be provided or covered under an insurance policy.

Parameters:

objlifetimeReserveDays - Specifies the number of days left for a certain service to be provided or covered under an insurance policy.

addNameOfInsured

public void addNameOfInsured(FN objFamilyName,
                    java.lang.String strGivenName,
                    java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof,
                    java.lang.String strSuffix,
                    java.lang.String strPrefix,
                    java.lang.String strNameTypeCode,
                    java.lang.String strNameRepresentationCode,
                    CWE objNameContext,
                    java.lang.String strNameAssemblyOrder,
                    DTM objEffectiveDate,
                    DTM objExpirationDate,
                    java.lang.String strProfessionalSuffix,
                    java.lang.String strCalledBy)

Set the Name Of Insured. This field contains the name of the insured person.

Parameters:

objFamilyName - Specifies the surname of a person.

strGivenName - Specifies First name.

strSecondAndFurtherGivenNamesOrInitialsThereof - Specifies multiple middle names that may be included by separating them with spaces.

strSuffix - Used to specify a name suffix (e.g., Jr. or III).

strPrefix - Used to specify a name prefix (e.g., Dr.).

strNameTypeCode - Specifies a code that represents the type of name. Suggested values are A,B,C,D,I,L,M,N,P,R,S,T,U...[Refer table 0200.]

strNameRepresentationCode - Specifies representations of the same name/address Suggested values are I,A,P [Refer table 0465]

objNameContext - Designates the context in which a name is used. [Refer User-defined Table 0448 ]

strNameAssemblyOrder - Specifies a code that represents the preferred display order of the components of this person name. Suggested values are G,F[Refer table 0444.]

objEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

objExpirationDate - Specifies the last date, if known, on which the address is valid and active.

strProfessionalSuffix - Used to specify an abbreviation, or a string of abbreviations, denoting qualifications that support the person's profession, (e.g., licenses).

strCalledBy - Used to specify the called name.

addNameOfInsured

public void addNameOfInsured(XPN NameOfInsured)

Set the Name Of Insured. This field contains the name of the insured person.

Parameters:

NameOfInsured -

setNameOfInsured

public void setNameOfInsured(ISingleCollection<XPN> objNameOfInsuredList)

Set the NameOfInsured list.

Parameters:

objNameOfInsuredList - List of NameOfInsured

setNoticeOfAdmissionDate

public void setNoticeOfAdmissionDate(java.lang.String strNoticeOfAdmissionDate)

Set the Notice Of Admission Date. This field indicates the date that it is send.

Parameters:

strNoticeOfAdmissionDate - Specifies the date that it was sent.

setNoticeOfAdmissionDate

public void setNoticeOfAdmissionDate(DT objnoticeOfAdmissionDate)

Set the Notice Of Admission Date. This field indicates the date that it is send.

Parameters:

objnoticeOfAdmissionDate - Specifies the date that it was sent.

setNoticeOfAdmissionFlag

public void setNoticeOfAdmissionFlag(java.lang.String strNoticeOfAdmissionFlag)

Set the Notice Of Admission Flag. This field indicates whether the insurance company requires a written notice of admission from the healthcare provider or not.

Parameters:

strNoticeOfAdmissionFlag - Specifies indicates whether the insurance company requires a written notice of admission from the healthcare provider.[Refer to HL7 table 0136].Suggested Values Y,N.

setNoticeOfAdmissionFlag

public void setNoticeOfAdmissionFlag(ID objnoticeOfAdmissionFlag)

Set the Notice Of Admission Flag. This field indicates whether the insurance company requires a written notice of admission from the healthcare provider or not.

Parameters:

objnoticeOfAdmissionFlag - Specifies indicates whether the insurance company requires a written notice of admission from the healthcare provider.[Refer to HL7 table 0136].Suggested Values Y,N.

setPlanType

public void setPlanType(java.lang.String strIdentifier,
               java.lang.String strText,
               java.lang.String strNameOfCodingSystem,
               java.lang.String strAlternateIdentifier,
               java.lang.String strAlternateText,
               java.lang.String strNameOfAlternateCodingSystem,
               java.lang.String strCodingSystemVersionID,
               java.lang.String strAlternateCodingSystemVersionId,
               java.lang.String strOriginalText,
               java.lang.String strSecondAlternateIdentifier,
               java.lang.String strSecondAlternateText,
               java.lang.String strNameofSecondAlternateCodingSystem,
               java.lang.String strSecondAlternateCodingSystemVersionID,
               java.lang.String strCodingSystemOID,
               java.lang.String strValueSetOID,
               java.lang.String strValueSetVersionID,
               java.lang.String strAlternateCodingSystemOID,
               java.lang.String strAlternateValueSetOID,
               java.lang.String strAlternateValueSetVersionID,
               java.lang.String strSecondAlternateCodingSystemOID,
               java.lang.String strSecondAlternateValueSetOID,
               java.lang.String strSecondAlternateValueSetVersionID)

Set the Plan Type. This contains the coding structure that identify the various plan types.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setPlanType

public void setPlanType(CWE objplanType)

Set the Plan Type. This contains the coding structure that identify the various plan types.

Parameters:

objplanType - Specifies the coding structure that identifies the various plan types, for example, Medicare, Medicaid, Blue Cross, HMO, etc.[Refer to User-defined Table 0086 - Plan ID].No Suggested Values.

setPolicyDeductible

public void setPolicyDeductible(MO objPrice,
                       java.lang.String strPriceType,
                       java.lang.String strFromValue,
                       java.lang.String strToValue,
                       CWE objRangeUnits,
                       java.lang.String strRangeType)

Set the Policy Deductible. This field contains the amount specify by the insurance plan that is the responsibility of the guarantor (i.e. deductible, excess, etc.).

Parameters:

objPrice - Specifies an amount of money and the denomination in which it is expressed.

strPriceType - Specifies a coded value, data type ID.[Refer to HL7 Table 0205] Suggested Values AP,DC,IC,PF,TF,TP,UP.

strFromValue - Spefies the "range" alongwith strToValue.

strToValue - Spefies the "range" alongwith strFromValue.

objRangeUnits - Specifies This describes the units associated with the range, e.g., seconds, minutes

strRangeType - Refer to HL7 Table 0298 - CP range type for valid values.(P,F)

setPolicyDeductible

public void setPolicyDeductible(CP policyDeductible)

Set the Policy Deductible. This field contains the amount specify by the insurance plan that is the responsibility of the guarantor (i.e. deductible, excess, etc.).

Parameters:

policyDeductible -

setPolicyLimitDays

public void setPolicyLimitDays(java.lang.String strPolicyLimitDays)

Set the Policy Limit Days. This field contains the maximum number of days that the insurance policy will cover.

Parameters:

strPolicyLimitDays - Specifies the maximum number of days that the insurance policy will cover.

setPolicyLimitDays

public void setPolicyLimitDays(NM objpolicyLimitDays)

Set the Policy Limit Days. This field contains the maximum number of days that the insurance policy will cover.

Parameters:

objpolicyLimitDays - Specifies the maximum number of days that the insurance policy will cover.

setPolicyNumber

public void setPolicyNumber(java.lang.String strPolicyNumber)

Set the Policy Number. This field contains the individual policy number of the insured to uniquely identify this patient's plan.

Parameters:

strPolicyNumber - The individual policy number of the insured to uniquely identify patient's plan.

setPolicyNumber

public void setPolicyNumber(ST objpolicyNumber)

Set the Policy Number. This field contains the individual policy number of the insured to uniquely identify this patient's plan.

Parameters:

objpolicyNumber - The individual policy number of the insured to uniquely identify patient's plan.

setPreAdmitCert

public void setPreAdmitCert(java.lang.String strPreAdmitCert)

Set the Pre Admit Cert. This field contains the pre admission certification code.

Parameters:

strPreAdmitCert - Specifies the pre admission certification code. ]

setPreAdmitCert

public void setPreAdmitCert(ST objpreAdmitCert)

Set the Pre Admit Cert. This field contains the pre admission certification code.

Parameters:

objpreAdmitCert - Specifies the pre admission certification code. ]

setPriorInsurancePlanID

public void setPriorInsurancePlanID(java.lang.String strIdentifier,
                           java.lang.String strText,
                           java.lang.String strNameOfCodingSystem,
                           java.lang.String strAlternateIdentifier,
                           java.lang.String strAlternateText,
                           java.lang.String strNameOfAlternateCodingSystem,
                           java.lang.String strCodingSystemVersionID,
                           java.lang.String strAlternateCodingSystemVersionId,
                           java.lang.String strOriginalText,
                           java.lang.String strSecondAlternateIdentifier,
                           java.lang.String strSecondAlternateText,
                           java.lang.String strNameofSecondAlternateCodingSystem,
                           java.lang.String strSecondAlternateCodingSystemVersionID,
                           java.lang.String strCodingSystemOID,
                           java.lang.String strValueSetOID,
                           java.lang.String strValueSetVersionID,
                           java.lang.String strAlternateCodingSystemOID,
                           java.lang.String strAlternateValueSetOID,
                           java.lang.String strAlternateValueSetVersionID,
                           java.lang.String strSecondAlternateCodingSystemOID,
                           java.lang.String strSecondAlternateValueSetOID,
                           java.lang.String strSecondAlternateValueSetVersionID)

Set the Prior Insurance Plan ID. This field uniquely identify the prior insurance plan when the plan ID changes.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setPriorInsurancePlanID

public void setPriorInsurancePlanID(CWE objpriorInsurancePlanID)

Set the Prior Insurance Plan ID. This field uniquely identify the prior insurance plan when the plan ID changes.

Parameters:

objpriorInsurancePlanID - Specifies a code to describe the insured's disability.

setReleaseInformationCode

public void setReleaseInformationCode(java.lang.String strIdentifier,
                             java.lang.String strText,
                             java.lang.String strNameOfCodingSystem,
                             java.lang.String strAlternateIdentifier,
                             java.lang.String strAlternateText,
                             java.lang.String strNameOfAlternateCodingSystem,
                             java.lang.String strCodingSystemVersionID,
                             java.lang.String strAlternateCodingSystemVersionId,
                             java.lang.String strOriginalText,
                             java.lang.String strSecondAlternateIdentifier,
                             java.lang.String strSecondAlternateText,
                             java.lang.String strNameofSecondAlternateCodingSystem,
                             java.lang.String strSecondAlternateCodingSystemVersionID,
                             java.lang.String strCodingSystemOID,
                             java.lang.String strValueSetOID,
                             java.lang.String strValueSetVersionID,
                             java.lang.String strAlternateCodingSystemOID,
                             java.lang.String strAlternateValueSetOID,
                             java.lang.String strAlternateValueSetVersionID,
                             java.lang.String strSecondAlternateCodingSystemOID,
                             java.lang.String strSecondAlternateValueSetOID,
                             java.lang.String strSecondAlternateValueSetVersionID)

Set the Release Information Code. This field indicates whether the healthcare provider can release information about the patient, and what information can be released.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setReleaseInformationCode

public void setReleaseInformationCode(CWE objreleaseInformationCode)

Set the Release Information Code. This field indicates whether the healthcare provider can release information about the patient, and what information can be released.

Parameters:

objreleaseInformationCode - Specifies whether the healthcare provider can release information about the patient, and what information can be released. [Refer to User-defined Table 0093].Suggested Values Y,N..

setReportOfEligibilityDate

public void setReportOfEligibilityDate(java.lang.String strReportOfEligibilityDate)

Set the Report Of Eligibility Date. This field indicates whether a report of eligibility (ROE) is received, and also indicates the date that it is received.

Parameters:

strReportOfEligibilityDate - Specifies whether a report of eligibility (ROE) was received.

setReportOfEligibilityDate

public void setReportOfEligibilityDate(DT objreportOfEligibilityDate)

Set the Report Of Eligibility Date. This field indicates whether a report of eligibility (ROE) is received, and also indicates the date that it is received.

Parameters:

objreportOfEligibilityDate - Specifies whether a report of eligibility (ROE) was received.

setReportOfEligibilityFlag

public void setReportOfEligibilityFlag(java.lang.String strReportOfEligibilityFlag)

Set the Report Of Eligibility Flag. This field indicates whether this insurance carrier sends a report that indicates that the patient is eligible for benefits and whether it identifies those benefits.

Parameters:

strReportOfEligibilityFlag - Specifies whether this insurance carrier sends a report that indicates that the patient is eligible for benefits and whether it identifies those benefits. [Refer to HL7 table 0136] valid values.Y,N

setReportOfEligibilityFlag

public void setReportOfEligibilityFlag(ID objreportOfEligibilityFlag)

Set the Report Of Eligibility Flag. This field indicates whether this insurance carrier sends a report that indicates that the patient is eligible for benefits and whether it identifies those benefits.

Parameters:

objreportOfEligibilityFlag - Specifies whether this insurance carrier sends a report that indicates that the patient is eligible for benefits and whether it identifies those benefits. [Refer to HL7 table 0136] valid values.Y,N

setSignatureCode

public void setSignatureCode(java.lang.String strIdentifier,
                    java.lang.String strText,
                    java.lang.String strNameOfCodingSystem,
                    java.lang.String strAlternateIdentifier,
                    java.lang.String strAlternateText,
                    java.lang.String strNameOfAlternateCodingSystem,
                    java.lang.String strCodingSystemVersionID,
                    java.lang.String strAlternateCodingSystemVersionId,
                    java.lang.String strOriginalText,
                    java.lang.String strSecondAlternateIdentifier,
                    java.lang.String strSecondAlternateText,
                    java.lang.String strNameofSecondAlternateCodingSystem,
                    java.lang.String strSecondAlternateCodingSystemVersionID,
                    java.lang.String strCodingSystemOID,
                    java.lang.String strValueSetOID,
                    java.lang.String strValueSetVersionID,
                    java.lang.String strAlternateCodingSystemOID,
                    java.lang.String strAlternateValueSetOID,
                    java.lang.String strAlternateValueSetVersionID,
                    java.lang.String strSecondAlternateCodingSystemOID,
                    java.lang.String strSecondAlternateValueSetOID,
                    java.lang.String strSecondAlternateValueSetVersionID)

Set the Signature Code. This field contains the code to indicate how the patient/subscriber authorization signature was obtained and how it is being retained by the provider.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setSignatureCode

public void setSignatureCode(CWE objsignatureCode)

Set the Signature Code. This field contains the code to indicate how the patient/subscriber authorization signature was obtained and how it is being retained by the provider.

Parameters:

objsignatureCode - Specifies the code to indicate how the patient/subscriber authorization signature was obtained and how it is being retained by the provider. [Refer to User-defined Table 0535] suggested values are C,S,M,P.

setSignatureCodeDate

public void setSignatureCodeDate(java.lang.String strSignatureCodeDate)

Set the Signature Code Date. This date the patient/subscriber authorization signature is obtained.

Parameters:

strSignatureCodeDate - Specifies date the patient/subscriber authorization signature was obtained.

setSignatureCodeDate

public void setSignatureCodeDate(DT objsignatureCodeDate)

Set the Signature Code Date. This date the patient/subscriber authorization signature is obtained.

Parameters:

objsignatureCodeDate - Specifies date the patient/subscriber authorization signature was obtained.

setTypeOfAgreementCode

public void setTypeOfAgreementCode(java.lang.String strIdentifier,
                          java.lang.String strText,
                          java.lang.String strNameOfCodingSystem,
                          java.lang.String strAlternateIdentifier,
                          java.lang.String strAlternateText,
                          java.lang.String strNameOfAlternateCodingSystem,
                          java.lang.String strCodingSystemVersionID,
                          java.lang.String strAlternateCodingSystemVersionId,
                          java.lang.String strOriginalText,
                          java.lang.String strSecondAlternateIdentifier,
                          java.lang.String strSecondAlternateText,
                          java.lang.String strNameofSecondAlternateCodingSystem,
                          java.lang.String strSecondAlternateCodingSystemVersionID,
                          java.lang.String strCodingSystemOID,
                          java.lang.String strValueSetOID,
                          java.lang.String strValueSetVersionID,
                          java.lang.String strAlternateCodingSystemOID,
                          java.lang.String strAlternateValueSetOID,
                          java.lang.String strAlternateValueSetVersionID,
                          java.lang.String strSecondAlternateCodingSystemOID,
                          java.lang.String strSecondAlternateValueSetOID,
                          java.lang.String strSecondAlternateValueSetVersionID)

Set the Type Of Agreement Code. This field is used to further identify an insurance plan.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setTypeOfAgreementCode

public void setTypeOfAgreementCode(CWE objtypeOfAgreementCode)

Set the Type Of Agreement Code. This field is used to further identify an insurance plan.

Parameters:

objtypeOfAgreementCode - Used to further identify an insurance plan. Refer to User-defined Table 0098 Suggested values S,U,M.

addVerificationBy

public void addVerificationBy(java.lang.String strIDNumber,
                     FN objFamilyName,
                     java.lang.String strGivenName,
                     java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof,
                     java.lang.String strSuffix,
                     java.lang.String strPrefix,
                     CWE objSourceTable,
                     HD objAssigningAuthority,
                     java.lang.String strNameTypeCode,
                     java.lang.String strIdentifierCheckDigit,
                     java.lang.String strCheckDigitScheme,
                     java.lang.String strIdentifierTypeCode,
                     HD objAssigningFacility,
                     java.lang.String strNameRepresentationCode,
                     CWE objNameContext,
                     java.lang.String strNameAssemblyOrder,
                     java.lang.String strEffectiveDate,
                     java.lang.String strExpirationDate,
                     java.lang.String strProfessionalSuffix,
                     CWE objAssigningJurisdiction,
                     CWE objAssigningAgencyOrDepratment,
                     java.lang.String strSecurityCheck,
                     java.lang.String strSecurityCheckScheme)

Set the Verification By. This field refers to the person who verify the benefits.

Parameters:

strIDNumber - Refers to the coded ID according to a user-defined table

objFamilyName - Specifies the surname of a person.

strGivenName - Specifies First name.

strSecondAndFurtherGivenNamesOrInitialsThereof - Specifies multiple middle names that may be included by separating them with spaces.

strSuffix - Used to specify a name suffix (e.g., Jr. or III).

strPrefix - Used to specify a name prefix (e.g., Dr.).

strSourceTable - Used as the HL7 identifier for the user-defined table of values for this component. [Refer User-defined Table 0297 - CN ID.]

objAssigningAuthority - Specifies a unique identifier of the system (or organization or agency of department) that creates the data. [Refer User-defined Table 0363 - Assigning authority]

strNameTypeCode - Specifies a code that represents the type of name.

strIdentifierCheckDigit - Specifies part of the identifying number used in the sending application.

strCheckDigitScheme - Specifies the code identifying the check digit scheme employed.[Refer HL7 Table 0061 - Check digit scheme].

strIdentifierTypeCode - Specifies A code corresponding to the type of identifier.[Refer HL7 Table 0203 - Identifier type].

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the person

strNameRepresentationCode - Provides an indication of the representation provided by the data item.

objNameContext - Designates the context in which a name is used. [Refer User-defined Table 0448 ]

strNameAssemblyOrder - Specifies a code that represents the preferred display order of the components of this person name. Suggested values are G,F[Refer table 0444.]

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

strProfessionalSuffix - Used to specify an abbreviation, or a string of abbreviations, denoting qualifications that support the person's profession, (e.g., licenses).

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepratment - Specifies the agency or department that assigned the identifier

strSecurityCheck - Specifies the version code that may be assigned to the person identifier

strSecurityCheckScheme - Specifies the check digit scheme.

addVerificationBy

public void addVerificationBy(XCN VerificationBy)

Set the Verification By. This field refers to the person who verify the benefits.

Parameters:

VerificationBy -

setVerificationBy

public void setVerificationBy(ISingleCollection<XCN> objVerificationByList)

Set the VerificationBy list.

Parameters:

objVerificationByList - List of VerificationBy

setVerificationDateTime

public void setVerificationDateTime(java.lang.String strTime)

Set the Verification Date Time. This field contains the date/time that the healthcare provider verified that the patient has the indicated benefits.

Parameters:

strTime - Specifies a point in time using a 24-hour clock notation.

setVerificationDateTime

public void setVerificationDateTime(DTM verificationDateTime)

Set the Verification Date Time. This field contains the date/time that the healthcare provider verified that the patient has the indicated benefits.

Parameters:

verificationDateTime - Verification Date Time.

setVerificationStatus

public void setVerificationStatus(java.lang.String strVerificationStatus)

Set the Verification Status. This field contains the status of this patient's relationship with this insurance carrier.

Parameters:

strVerificationStatus - Specifies the status of this patient's relationship with this insurance carrier.

setVerificationStatus

public void setVerificationStatus(ST objverificationStatus)

Set the Verification Status. This field contains the status of this patient's relationship with this insurance carrier.

Parameters:

objverificationStatus - Specifies the status of this patient's relationship with this insurance carrier.

setVIPIndicator

public void setVIPIndicator(java.lang.String strIdentifier,
                   java.lang.String strText,
                   java.lang.String strNameOfCodingSystem,
                   java.lang.String strAlternateIdentifier,
                   java.lang.String strAlternateText,
                   java.lang.String strNameOfAlternateCodingSystem,
                   java.lang.String strCodingSystemVersionID,
                   java.lang.String strAlternateCodingSystemVersionId,
                   java.lang.String strOriginalText,
                   java.lang.String strSecondAlternateIdentifier,
                   java.lang.String strSecondAlternateText,
                   java.lang.String strNameofSecondAlternateCodingSystem,
                   java.lang.String strSecondAlternateCodingSystemVersionID,
                   java.lang.String strCodingSystemOID,
                   java.lang.String strValueSetOID,
                   java.lang.String strValueSetVersionID,
                   java.lang.String strAlternateCodingSystemOID,
                   java.lang.String strAlternateValueSetOID,
                   java.lang.String strAlternateValueSetVersionID,
                   java.lang.String strSecondAlternateCodingSystemOID,
                   java.lang.String strSecondAlternateValueSetOID,
                   java.lang.String strSecondAlternateValueSetVersionID)

Set the VIP Indicator. This field identify the type of VIP for the insured.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setVIPIndicator

public void setVIPIndicator(CWE objvIPIndicator)

Set the VIP Indicator. This field identify the type of VIP for the insured.

Parameters:

objvIPIndicator - Specifies the type of VIP for the insured. [Refer to User-defined Table 0099 - VIP indicator]

addExternalHealthPlanIdentifiers

public void addExternalHealthPlanIdentifiers(java.lang.String strIDNumber,
                                    java.lang.String strCheckDigit,
                                    java.lang.String strCheckDigitScheme,
                                    HD objAssigningAuthority,
                                    java.lang.String strIdentifierTypeCode,
                                    HD objAssigningFacility,
                                    java.lang.String strEffectiveDate,
                                    java.lang.String strExpirationDate,
                                    CWE objAssigningJurisdiction,
                                    CWE objAssigningAgencyOrDepartment,
                                    java.lang.String strSecurityCheck,
                                    java.lang.String strSecurityCheckScheme)

Set the External Health Plan Identifiers. This field contains the external Health Plan Identifiers that correspond to the internal Health Plan ID in IN1-2 – Health Plan ID.

Parameters:

strIDNumber - Specifies the value of the identifier itself.

strCheckDigit - It is part of the identifying number used in the sending application.

strCheckDigitScheme - Contains the code identifying the check digit scheme employed. Suggested Values NP,ISO,M10,M11.[Refer table No.0061].

objAssigningAuthority - The assigning authority is a unique name of the system (or organization or agency or department) that creates the data. .

strIdentifierTypeCode - Specifies a code corresponding to the type of identifier.In some cases, this code may be used as a qualifier to the "Assigning authority" component.[Refer table No 0203]

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the patient.

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepartment - Specifies agency or department that assigned the identifier.

strSecurityCheck - is used to communicate the version code.

objSecurityCheckSCheme - is used to transmit information intended to validate veracity of the supplied identifier

addExternalHealthPlanIdentifiers

public void addExternalHealthPlanIdentifiers(CX ExternalHealthPlanIdentifiers)

Set the External Health Plan Identifiers. This field contains the external Health Plan Identifiers that correspond to the internal Health Plan ID in IN1-2 – Health Plan ID.

Parameters:

ExternalHealthPlanIdentifiers - - External Health Plan Identifiers

setExternalHealthPlanIdentifiers

public void setExternalHealthPlanIdentifiers(ISingleCollection<CX> objExternalHealthPlanIdentifiersList)

Set the External Health Plan Identifiers. This field contains the external Health Plan Identifiers that correspond to the internal Health Plan ID in IN1-2 – Health Plan ID.

Parameters:

objExternalHealthPlanIdentifiersList - External Health Plan Identifiers

setInsuranceActionCode

public void setInsuranceActionCode(java.lang.String strInsuranceActionCode)

Set the Insurance Action Code. The Insurance Action Code Defines the action to be taken for this insurance.

Parameters:

strInsuranceActionCode - The Insurance Action Code Defines the action to be taken for this insurance.

setInsuranceActionCode

public void setInsuranceActionCode(ID objInsuranceActionCode)

Set the Insurance Action Code. The Insurance Action Code Defines the action to be taken for this insurance.

Parameters:

objInsuranceActionCode - Indicates whether or not a system should suppress printing of the guarantor's bills. [to HL7 table 0136 - Yes/no Indicator].valid values Y,N.

validate

public boolean validate()
                 throws InvalidSegmentException

Validates HL7 Message objects . Validate method checks for validation each and every segments in side the Message object against specified message Structure. Validation chcecks include optionality of segment or group. It also verifies the number of times segment or group is repeated in message. e.g {PSH} while parsing PSH segment validate method will check for its mandatory presence. [PSH] in this case validate will throw exception if one tries to enter more than one PSH segment.

Specified by:

validate in interface ISegment

Overrides:

validate in class Segment

Returns:

boolean - true or false.

Throws:

InvalidSegmentException - If Segment Validation fails