cdac.medinfo.sdk.hl7282.baselibs.segments

Class IN3

java.lang.Object

cdac.medinfo.sdk.hl7282.baselibs.segments.Segment

cdac.medinfo.sdk.hl7282.baselibs.segments.IN3

All Implemented Interfaces:

ISegment

public class IN3
extends Segment

IN3 - Insurance Additional Information, Certification Segment.

The IN3 segment contains additional insurance information for certifying the need for patient care. Fields used by this segment are defined by CMS, or other regulatory agencies.

Represents an HL7 IN3 message segment. This segment has the following fields:

IN3-1: Set ID - IN3 (SI)Required
IN3-2: Certification Number (CX)Optional
IN3-3: Certified By (XCN)Optional
IN3-4: Certification Required (ID)Optional
IN3-5: Penalty (MOP)Optional
IN3-6: Certification Date/Time (DTM)Optional
IN3-7: Certification Modify Date/Time (DTM)Optional
IN3-8: Operator (XCN)Optional
IN3-9: Certification Begin Date (DT)Optional
IN3-10: Certification End Date (DT)Optional
IN3-11: Days (DTN)Optional
IN3-12: Non-Concur Code/Description (CWE)Optional
IN3-13: Non-Concur Effective Date/Time (DTM)Optional
IN3-14: Physician Reviewer (XCN)Optional
IN3-15: Certification Contact (ST)Optional
IN3-16: Certification Contact Phone Number (XTN)Optional
IN3-17: Appeal Reason (CWE)Optional
IN3-18: Certification Agency (CWE)Optional
IN3-19: Certification Agency Phone Number (XTN)Optional
IN3-20: Pre-Certification Requirement (ICD)Optional
IN3-21: Case Manager (ST)Optional
IN3-22: Second Opinion Date (DT)Optional
IN3-23: Second Opinion Status (CWE)Optional
IN3-24: Second Opinion Documentation Received (CWE)Optional
IN3-25: Second Opinion Physician (XCN)Optional
IN3-26: Certification Type (CWE)Optional
IN3-27: Certification Category (CWE)Optional

This class provides mechanism to validate message against HL7 v 2.8.2 standard. The class provides accessors & mutators for the elements mentioned above. The class has validate method which validates Message against HL7 v 2.8.2 standard.

User can also create Segment through SegmentFactory

Constructor Summary

Constructors

Constructor and Description
IN3() Constructs the IN3 segment.

Method Summary

Methods

Modifier and Type	Method and Description
void	addCertificationAgencyPhNo(java.lang.String strTeleCommunicationUseCode, java.lang.String strTeleCommunicationEquipmentType, java.lang.String strCommuinicationAddress, java.lang.String strCountryCode, java.lang.String strAreaCityCode, java.lang.String strLocalNumber, java.lang.String strExtension, java.lang.String strAnyText, java.lang.String strExtensionPrefix, java.lang.String strSpeedDialCode, java.lang.String strUnformattedTelephoneNumber, java.lang.String strEffectiveStartDate, java.lang.String strExpirationDate, CWE objExpirationReason, CWE objProtectionCode, EI objSharedTelecommunicationIdentifier, java.lang.String strPreferenceOrder) Set the Certification Agency PhNo.
void	addCertificationAgencyPhNo(XTN objcertificationAgencyPhNo) Set the Certification Agency PhNo.
void	addCertificationContactPhNo(java.lang.String strTeleCommunicationUseCode, java.lang.String strTeleCommunicationEquipmentType, java.lang.String strCommuinicationAddress, java.lang.String strCountryCode, java.lang.String strAreaCityCode, java.lang.String strLocalNumber, java.lang.String strExtension, java.lang.String strAnyText, java.lang.String strExtensionPrefix, java.lang.String strSpeedDialCode, java.lang.String strUnformattedTelephoneNumber, java.lang.String strEffectiveStartDate, java.lang.String strExpirationDate, CWE objExpirationReason, CWE objProtectionCode, EI objSharedTelecommunicationIdentifier, java.lang.String strPreferenceOrder) Set the Certification Contact PhNo.
void	addCertificationContactPhNo(XTN objcertificationContactPhNo) Set the Certification Contact PhNo.
void	addCertifiedBy(java.lang.String strIDNumber, FN objFamilyName, java.lang.String strGivenName, java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof, java.lang.String strSuffix, java.lang.String strPrefix, CWE objSourceTable, HD objAssigningAuthority, java.lang.String strNameTypeCode, java.lang.String strIdentifierCheckDigit, java.lang.String strCheckDigitScheme, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strNameRepresentationCode, CWE objNameContext, java.lang.String strNameAssemblyOrder, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, java.lang.String strProfessionalSuffix, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepratment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Set the Certified By.
void	addCertifiedBy(XCN objCertifiedBy) Set the Certified By.
void	addOperator(java.lang.String strIDNumber, FN objFamilyName, java.lang.String strGivenName, java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof, java.lang.String strSuffix, java.lang.String strPrefix, CWE objSourceTable, HD objAssigningAuthority, java.lang.String strNameTypeCode, java.lang.String strIdentifierCheckDigit, java.lang.String strCheckDigitScheme, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strNameRepresentationCode, CWE objNameContext, java.lang.String strNameAssemblyOrder, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, java.lang.String strProfessionalSuffix, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepratment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Set the Operator.
void	addOperator(XCN objOperator) Set the Operator.
void	addPhysicianReviewer(java.lang.String strIDNumber, FN objFamilyName, java.lang.String strGivenName, java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof, java.lang.String strSuffix, java.lang.String strPrefix, CWE objSourceTable, HD objAssigningAuthority, java.lang.String strNameTypeCode, java.lang.String strIdentifierCheckDigit, java.lang.String strCheckDigitScheme, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strNameRepresentationCode, CWE objNameContext, java.lang.String strNameAssemblyOrder, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, java.lang.String strProfessionalSuffix, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepratment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Set the Physician Reviewer.
void	addPhysicianReviewer(XCN objPhysicianReviewer) Set the Physician Reviewer.
void	addPrecertificationRequirement(CWE objCertificationPatientType, java.lang.String strcertificationRequired, DTM objDateOrTimecertificationRequired) Set the Precertification Requirement.
void	addPrecertificationRequirement(ICD objPrecertificationRequirement) Set the Precertification Requirement.
void	addSecondOpinionDocumentationReceived(CWE objSecondOpinionDocumentationReceived) Set the Second Opinion Documentation Received.
void	addSecondOpinionDocumentationReceived(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Second Opinion Documentation Received.
void	addSecondOpinionPhysician(java.lang.String strIDNumber, FN objFamilyName, java.lang.String strGivenName, java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof, java.lang.String strSuffix, java.lang.String strPrefix, CWE objSourceTable, HD objAssigningAuthority, java.lang.String strNameTypeCode, java.lang.String strIdentifierCheckDigit, java.lang.String strCheckDigitScheme, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strNameRepresentationCode, CWE objNameContext, java.lang.String strNameAssemblyOrder, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, java.lang.String strProfessionalSuffix, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepratment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Set the Second Opinion Physician.
void	addSecondOpinionPhysician(XCN objSecondOpinionPhysician) Set the Second Opinion Physician.
CWE	getAppealReason() Retrieves the Appeal Reason.
ST	getCaseManager() Retrieves the Case Manager.
CWE	getCertificationAgency() Retrieves the Certification Agency.
ISingleCollection<XTN>	getCertificationAgencyPhNo() Retrieves the Certification Agency PhNo.
DT	getCertificationBeginDt() Retrieves the Certification Begin Dt.
CWE	getCertificationCategory() Retrieves the Certification Category.
ST	getCertificationContact() Retrieves the Certification Contact.
ISingleCollection<XTN>	getCertificationContactPhNo() Retrieves the Certification Contact PhNo.
DTM	getCertificationDtOrTm() Retrieves the Certification Dt Or Tm.
DT	getCertificationEndDt() Retrieves the Certification End Dt.
DTM	getCertificationModifyDtOrTm() Retrieves the Certification Modify Dt Or Tm.
CX	getCertificationNo() Retrieves the Certification No.
ID	getCertificationRequired() Retrieves the Certification Required.
CWE	getCertificationType() Retrieves the Certification Type.
ISingleCollection<XCN>	getCertifiedBy() Retrieves the Certified By.
DTN	getDays() Retrieves the Days.
CWE	getNonConcurCodeOrDesc() Retrieves the Non Concur Code Or Desc.
DTM	getNonConcurEffectiveDtOrTm() Retrieves the Non Concur Effective Dt Or Tm.
ISingleCollection<XCN>	getOperator() Retrieves the Operator.
MOP	getPenalty() Retrieves the Penalty.
ISingleCollection<XCN>	getPhysicianReviewer() Retrieves the Physician Reviewer.
ISingleCollection<ICD>	getPrecertificationRequirement() Retrieves the Precertification Requirement.
DT	getSecondOpinionDate() Retrieves the Second Opinion Date.
ISingleCollection<CWE>	getSecondOpinionDocumentationReceived() Retrieves the Second Opinion Documentation Received.
ISingleCollection<XCN>	getSecondOpinionPhysician() Retrieves the Second Opinion Physician.
CWE	getSecondOpinionStatus() Retrieves the Second Opinion Status.
SI	getSetID_IN3() Retrieves the Set ID IN3.
void	setAppealReason(CWE objappealReason) Set the Appeal Reason.
void	setAppealReason(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Appeal Reason.
void	setCaseManager(ST objcaseManager) Set the Case Manager.
void	setCaseManager(java.lang.String strCaseManager) Set the Case Manager.
void	setCertificationAgency(CWE objcertificationAgency) Set the Certification Agency.
void	setCertificationAgency(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Certification Agency.
void	setCertificationAgencyPhNo(ISingleCollection<XTN> objCertificationAgencyPhNoList) Set the CertificationAgencyPhNo list.
void	setCertificationBeginDt(DT objcertificationBeginDt) Set the Certification Begin Dt.
void	setCertificationBeginDt(java.lang.String strcertificationBeginDt) Set the Certification Begin Dt.
void	setCertificationCategory(CWE objCertificationCategory) Set the Certification Category.
void	setCertificationCategory(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Certification Category.
void	setCertificationContact(ST objcertificationContact) Set the Certification Contact.
void	setCertificationContact(java.lang.String strCertificationContact) Set the Certification Contact.
void	setCertificationContactPhNo(ISingleCollection<XTN> objCertificationContactPhNoList) Set the CertificationContactPhNo list.
void	setCertificationDtOrTm(DTM objcertificationDtOrTm) Set the Certification Dt Or Tm.
void	setCertificationDtOrTm(java.lang.String strTime) Set the Certification Dt Or Tm.
void	setCertificationEndDt(DT objcertificationEndDt) Set the Certification End Dt.
void	setCertificationEndDt(java.lang.String strcertificationEndDt) Set the Certification End Dt.
void	setCertificationModifyDateOrTime(DTM objcertificationModifyDtOrTm) Set the Certification Modify Dt Or Tm.
void	setCertificationModifyDateOrTime(java.lang.String strTime) Set the Certification Modify Dt Or Tm.
void	setCertificationNo(CX objcertificationNo) Set the Certification No.
void	setCertificationNo(java.lang.String strIDNumber, java.lang.String strCheckDigit, java.lang.String strCheckDigitScheme, HD objAssigningAuthority, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepartment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Set the Certification No.
void	setCertificationRequired(ID objcertificationRequired) Set the Certification Required.
void	setCertificationRequired(java.lang.String strcertificationRequired) Set the Certification Required.
void	setCertificationType(CWE objCertificationType) Set the Certification Type.
void	setCertificationType(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Certification Type.
void	setCertifiedBy(ISingleCollection<XCN> objCertifiedByList) Set the CertifiedBy list.
void	setDays(CWE objDayType, java.lang.String strNumberOfDays) Set the Days.
void	setDays(DTN objdays) Set the Days.
void	setNonConcurCodeOrDesc(CWE objnonConcurCodeOrDesc) Set the Non Concur Code Or Desc.
void	setNonConcurCodeOrDesc(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Non Concur Code Or Desc.
void	setnonConcurEffectiveDtOrTm(DTM objnonConcurEffectiveDtOrTm) Set the Non Concur Effective Dt Or Tm.
void	setnonConcurEffectiveDtOrTm(java.lang.String strTime) Set the Non Concur Effective Dt Or Tm.
void	setOperator(ISingleCollection<XCN> objOperatorList) Set the Operator list.
void	setPenalty(MOP objpenalty) Set the Penalty.
void	setPenalty(java.lang.String strMoneyOrPercentageIndicator, java.lang.String strMoneyOrPercentageQuantity, java.lang.String strCurrencyDenomination) Set the Penalty.
void	setPhysicianReviewer(ISingleCollection<XCN> objPhysicianReviewerList) Set the PhysicianReviewer list.
void	setPrecertificationRequirement(ISingleCollection<ICD> objPrecertificationRequirementList) Set the PrecertificationRequirement list.
void	setSecondOpinionDate(DT objsecondOpinionDate) Set the Second Opinion Date.
void	setSecondOpinionDate(java.lang.String strSecondOpinionDate) Set the Second Opinion Date.
void	setSecondOpinionDocumentationReceived(ISingleCollection<CWE> objSecondOpinionDocumentationReceivedList) Set the SecondOpinionDocumentationReceived list.
void	setSecondOpinionPhysician(ISingleCollection<XCN> objSecondOpinionPhysicianList) Set the SecondOpinionPhysician list.
void	setSecondOpinionStatus(CWE objsecondOpinionStatus) Set the Second Opinion Status.
void	setSecondOpinionStatus(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Second Opinion Status.
void	setSetID_IN3(SI objsetID_IN3) Set the Set ID IN3.
void	setSetID_IN3(java.lang.String strSequenceID) Set the Set ID IN3.
boolean	validate() Validates HL7 Message objects .

Methods inherited from class cdac.medinfo.sdk.hl7282.baselibs.segments.Segment

addUnRecognizedField, dumpSegment, getFields, getName, getUnrecognizedFields, moveToNextSegment, parse, removeDataElement, removeDataElement, serialize, setName, setUnRecognizedField, updateDataElement, updateDataElement, writeToXML

Methods inherited from class java.lang.Object

equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

IN3

public IN3()

Constructs the IN3 segment.

Method Detail

getAppealReason

public CWE getAppealReason()

Retrieves the Appeal Reason. This field contains the reason that an appeal is made on a non-concur for certification.

Returns:

CWE - appealReason

getCaseManager

public ST getCaseManager()

Retrieves the Case Manager. This field contains the name of the entity, which is handling this particular patient's case.

Returns:

String - caseManager

getCertificationAgency

public CWE getCertificationAgency()

Retrieves the Certification Agency.

Returns:

CWE - certificationAgency

getCertificationAgencyPhNo

public ISingleCollection<XTN> getCertificationAgencyPhNo()

Retrieves the Certification Agency PhNo.

Returns:

ISingleCollection - certificationAgencyPhNo

getCertificationBeginDt

public DT getCertificationBeginDt()

Retrieves the Certification Begin Dt.

Returns:

String - certificationBeginDt

getCertificationContact

public ST getCertificationContact()

Retrieves the Certification Contact. This field contains the name of the party contacted at the certification agency who granted the certification and communicated the certification number.

Returns:

String - certificationContact

getCertificationContactPhNo

public ISingleCollection<XTN> getCertificationContactPhNo()

Retrieves the Certification Contact PhNo. This field contains the phone number of the certification contact. Multiple phone numbers for the same certification contact may be sent in this sequence.

Returns:

ISingleCollection - certificationContactPhNo

getCertificationDtOrTm

public DTM getCertificationDtOrTm()

Retrieves the Certification Dt Or Tm. This field contains the date and time stamp that indicates when insurance is certified to exist for the patient.

Returns:

DTM - certificationDtOrTm

getCertificationEndDt

public DT getCertificationEndDt()

Retrieves the Certification End Dt. This field contains date that this certification ends.

Returns:

String - certificationEndDt

getCertificationModifyDtOrTm

public DTM getCertificationModifyDtOrTm()

Retrieves the Certification Modify Dt Or Tm. This field contains the date/time that the certification is modify.

Returns:

DTM - certificationModifyDtOrTm

getCertificationNo

public CX getCertificationNo()

Retrieves the Certification No. This field contains the number assigned by the certification agency.

Returns:

CX - certificationNo

getCertificationRequired

public ID getCertificationRequired()

Retrieves the Certification Required. This field indicates whether certification is required or not.

Returns:

String - certificationRequired

getCertifiedBy

public ISingleCollection<XCN> getCertifiedBy()

Retrieves the Certified By. This field contains the party that approved the certification.

Returns:

ISingleCollection - certifiedBy

getDays

public DTN getDays()

Retrieves the Days. This field contains the number of days for which this certification is valid. This field applies to denied, pending, or approved days.

Returns:

DTN - days

getNonConcurCodeOrDesc

public CWE getNonConcurCodeOrDesc()

Retrieves the Non Concur Code Or Desc. This field contains the non-concur code and description for a denied request.

Returns:

CWE - nonConcurCodeOrDesc

getNonConcurEffectiveDtOrTm

public DTM getNonConcurEffectiveDtOrTm()

Retrieves the Non Concur Effective Dt Or Tm. This field contains the effective date of the non-concurrence classification.

Returns:

DTM - nonConcurEffectiveDtOrTm

getOperator

public ISingleCollection<XCN> getOperator()

Retrieves the Operator. This field contains the name party who is responsible for sending this certification information.

Returns:

ISingleCollection - operator

getPenalty

public MOP getPenalty()

Retrieves the Penalty. This field contains the penalty, in dollars or a percentage that will be assessed if the pre-certification is not performed.

Returns:

MOP - penalty

getPhysicianReviewer

public ISingleCollection<XCN> getPhysicianReviewer()

Retrieves the Physician Reviewer. This field contains the physician who works with and reviews cases that are pending physician review for the certification agency. Multiple names for the same person may be sent in this sequence.

Returns:

ISingleCollection - physicianReviewer

getPrecertificationRequirement

public ISingleCollection<ICD> getPrecertificationRequirement()

Retrieves the Precertification Requirement. This field indicates whether pre-certification is required for particular patient types, and the time window for obtaining the certification.

Returns:

ISingleCollection - precertificationRequirement

getSecondOpinionDate

public DT getSecondOpinionDate()

Retrieves the Second Opinion Date. This field contains the date that the second opinion is obtained.

Returns:

String - secondOpinionDate

getSecondOpinionDocumentationReceived

public ISingleCollection<CWE> getSecondOpinionDocumentationReceived()

Retrieves the Second Opinion Documentation Received. This field if accompanying documentation has been received by the provider.

Returns:

ISingleCollection - secondOpinionDocumentationReceived

getSecondOpinionPhysician

public ISingleCollection<XCN> getSecondOpinionPhysician()

Retrieves the Second Opinion Physician. This field contains an identifier and name of the physician who provided the second opinion. Multiple names and identifiers for the same person may be sent in this sequence.

Returns:

ISingleCollection - secondOpinionPhysician

getSecondOpinionStatus

public CWE getSecondOpinionStatus()

Retrieves the Second Opinion Status. This field contains the code that represents the status of the second opinion.

Returns:

String - secondOpinionStatus

getSetID_IN3

public SI getSetID_IN3()

Retrieves the Set ID IN3. This field contains the number that identifies this transaction.

Returns:

String - setID_IN3

getCertificationType

public CWE getCertificationType()

Retrieves the Certification Type. This field contains the certification type code for a specific certification.

Returns:

String - CertificationType

getCertificationCategory

public CWE getCertificationCategory()

Retrieves the Certification Category. This field contains the certification category code for a specific certification.

Returns:

String - CertificationCategory

setAppealReason

public void setAppealReason(java.lang.String strIdentifier,
                   java.lang.String strText,
                   java.lang.String strNameOfCodingSystem,
                   java.lang.String strAlternateIdentifier,
                   java.lang.String strAlternateText,
                   java.lang.String strNameOfAlternateCodingSystem,
                   java.lang.String strCodingSystemVersionID,
                   java.lang.String strAlternateCodingSystemVersionId,
                   java.lang.String strOriginalText,
                   java.lang.String strSecondAlternateIdentifier,
                   java.lang.String strSecondAlternateText,
                   java.lang.String strNameofSecondAlternateCodingSystem,
                   java.lang.String strSecondAlternateCodingSystemVersionID,
                   java.lang.String strCodingSystemOID,
                   java.lang.String strValueSetOID,
                   java.lang.String strValueSetVersionID,
                   java.lang.String strAlternateCodingSystemOID,
                   java.lang.String strAlternateValueSetOID,
                   java.lang.String strAlternateValueSetVersionID,
                   java.lang.String strSecondAlternateCodingSystemOID,
                   java.lang.String strSecondAlternateValueSetOID,
                   java.lang.String strSecondAlternateValueSetVersionID)

Set the Appeal Reason. This field contains the reason that an appeal is made on a non-concur for certification.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setAppealReason

public void setAppealReason(CWE objappealReason)

Set the Appeal Reason. This field contains the reason that an appeal is made on a non-concur for certification.

Parameters:

objappealReason -

setCaseManager

public void setCaseManager(java.lang.String strCaseManager)

Set the Case Manager. This field contains the name of the entity, which is handling this particular patient's case.

Parameters:

strCaseManager - The name of the entity

setCaseManager

public void setCaseManager(ST objcaseManager)

Set the Case Manager. This field contains the name of the entity, which is handling this particular patient's case.

Parameters:

objcaseManager -

setCertificationAgency

public void setCertificationAgency(java.lang.String strIdentifier,
                          java.lang.String strText,
                          java.lang.String strNameOfCodingSystem,
                          java.lang.String strAlternateIdentifier,
                          java.lang.String strAlternateText,
                          java.lang.String strNameOfAlternateCodingSystem,
                          java.lang.String strCodingSystemVersionID,
                          java.lang.String strAlternateCodingSystemVersionId,
                          java.lang.String strOriginalText,
                          java.lang.String strSecondAlternateIdentifier,
                          java.lang.String strSecondAlternateText,
                          java.lang.String strNameofSecondAlternateCodingSystem,
                          java.lang.String strSecondAlternateCodingSystemVersionID,
                          java.lang.String strCodingSystemOID,
                          java.lang.String strValueSetOID,
                          java.lang.String strValueSetVersionID,
                          java.lang.String strAlternateCodingSystemOID,
                          java.lang.String strAlternateValueSetOID,
                          java.lang.String strAlternateValueSetVersionID,
                          java.lang.String strSecondAlternateCodingSystemOID,
                          java.lang.String strSecondAlternateValueSetOID,
                          java.lang.String strSecondAlternateValueSetVersionID)

Set the Certification Agency.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setCertificationAgency

public void setCertificationAgency(CWE objcertificationAgency)

Set the Certification Agency.

Parameters:

objcertificationAgency - Certification Agency.

addCertificationAgencyPhNo

public void addCertificationAgencyPhNo(java.lang.String strTeleCommunicationUseCode,
                              java.lang.String strTeleCommunicationEquipmentType,
                              java.lang.String strCommuinicationAddress,
                              java.lang.String strCountryCode,
                              java.lang.String strAreaCityCode,
                              java.lang.String strLocalNumber,
                              java.lang.String strExtension,
                              java.lang.String strAnyText,
                              java.lang.String strExtensionPrefix,
                              java.lang.String strSpeedDialCode,
                              java.lang.String strUnformattedTelephoneNumber,
                              java.lang.String strEffectiveStartDate,
                              java.lang.String strExpirationDate,
                              CWE objExpirationReason,
                              CWE objProtectionCode,
                              EI objSharedTelecommunicationIdentifier,
                              java.lang.String strPreferenceOrder)

Set the Certification Agency PhNo.

Parameters:

strTeleCommunicationUseCode - Specifies a code that represents a specific use of a telecommunication number. Suggested values are PRN,ORN,WPN,VHN,ASN,EMR,NET,BPN [Refer table 0201.]

strTeleCommunicationEquipmentType - Specifies a code that represents the type of telecommunication equipment. Suggested values are PH,FX,MD,CP,BP,Internet,X.400,TDD,TTY [Refer table 0202.]

strCommuinicationAddress - Specifies Email address.

strCountryCode - Specifies the Country code.

strAreaCityCode - Specifies the area /City Code.

strLocalNumber - Specifies an Local Number.

strExtension - Specifies an Extension.

strAnyText - Contains comments with respect to the telephone number.

strExtensionPrefix - Specifies the characters established within a company's internal telephone system network used as a prefix to the Extension component for internal dialing.

strSpeedDialCode - Specifies The characters established within a company's internal telephone system used in place of the (external) telephone number.

strUnformattedTelephoneNumber - Specifies an expression of the telephone number as an unparsible string.

strEffectiveStartDate - Specifies start date.

strExpirationDate - Specifies expiration date.

objExpirationReason - Specifies reason why this contact is marked as ended.

objProtectionCode - Specifies reason why this information is sensitive or protected.

objSharedTelecommunicationIdentifier - Specifies a unique phone number phone telephone number or email-id.

strPreferenceOrder - Specifies the preference order for an entity..

addCertificationAgencyPhNo

public void addCertificationAgencyPhNo(XTN objcertificationAgencyPhNo)

Set the Certification Agency PhNo.

Parameters:

objcertificationAgencyPhNo -

setCertificationAgencyPhNo

public void setCertificationAgencyPhNo(ISingleCollection<XTN> objCertificationAgencyPhNoList)

Set the CertificationAgencyPhNo list.

Parameters:

objCertificationAgencyPhNoList - List of CertificationAgencyPhNo

setCertificationBeginDt

public void setCertificationBeginDt(java.lang.String strcertificationBeginDt)

Set the Certification Begin Dt.

Parameters:

strcertificationBeginDt - .Date from which certificationification is Valid

setCertificationBeginDt

public void setCertificationBeginDt(DT objcertificationBeginDt)

Set the Certification Begin Dt.

Parameters:

objcertificationBeginDt - .Date from which certificationification is Valid

setCertificationContact

public void setCertificationContact(java.lang.String strCertificationContact)

Set the Certification Contact. This field contains the name of the party contacted at the certification agency who granted the certification and communicated the certification number.

Parameters:

strCertificationContact - The name of the party

setCertificationContact

public void setCertificationContact(ST objcertificationContact)

Set the Certification Contact. This field contains the name of the party contacted at the certification agency who granted the certification and communicated the certification number.

Parameters:

objcertificationContact - The name of the party

addCertificationContactPhNo

public void addCertificationContactPhNo(java.lang.String strTeleCommunicationUseCode,
                               java.lang.String strTeleCommunicationEquipmentType,
                               java.lang.String strCommuinicationAddress,
                               java.lang.String strCountryCode,
                               java.lang.String strAreaCityCode,
                               java.lang.String strLocalNumber,
                               java.lang.String strExtension,
                               java.lang.String strAnyText,
                               java.lang.String strExtensionPrefix,
                               java.lang.String strSpeedDialCode,
                               java.lang.String strUnformattedTelephoneNumber,
                               java.lang.String strEffectiveStartDate,
                               java.lang.String strExpirationDate,
                               CWE objExpirationReason,
                               CWE objProtectionCode,
                               EI objSharedTelecommunicationIdentifier,
                               java.lang.String strPreferenceOrder)

Set the Certification Contact PhNo. This field contains the phone number of the certification contact. Multiple phone numbers for the same certification contact may be sent in this sequence.

Parameters:

strTeleCommunicationUseCode - Specifies a code that represents a specific use of a telecommunication number. Suggested values are PRN,ORN,WPN,VHN,ASN,EMR,NET,BPN [Refer table 0201.]

strTeleCommunicationEquipmentType - Specifies a code that represents the type of telecommunication equipment. Suggested values are PH,FX,MD,CP,BP,Internet,X.400,TDD,TTY [Refer table 0202.]

strCommuinicationAddress - Specifies Email address.

strCountryCode - Specifies the Country code.

strAreaCityCode - Specifies the area /City Code.

strLocalNumber - Specifies an Local Number.

strExtension - Specifies an Extension.

strAnyText - Contains comments with respect to the telephone number.

strExtensionPrefix - Specifies the characters established within a company's internal telephone system network used as a prefix to the Extension component for internal dialing.

strSpeedDialCode - Specifies The characters established within a company's internal telephone system used in place of the (external) telephone number.

strUnformattedTelephoneNumber - Specifies an expression of the telephone number as an unparsible string.

strEffectiveStartDate - Specifies start date.

strExpirationDate - Specifies expiration date.

objExpirationReason - Specifies reason why this contact is marked as ended.

objProtectionCode - Specifies reason why this information is sensitive or protected.

objSharedTelecommunicationIdentifier - Specifies a unique phone number phone telephone number or email-id.

strPreferenceOrder - Specifies the preference order for an entity..

addCertificationContactPhNo

public void addCertificationContactPhNo(XTN objcertificationContactPhNo)

Set the Certification Contact PhNo. This field contains the phone number of the certification contact. Multiple phone numbers for the same certification contact may be sent in this sequence.

Parameters:

strLocalNumber - Specifies an Local Number.

strExtension - Specifies an Extension.

strAnyText - Contains comments with respect to the telephone number.

strExtensionPrefix - Specifies the characters established within a company's internal telephone system network used as a prefix to the Extension component for internal dialing.

strSpeedDialCode - Specifies The characters established within a company's internal telephone system used in place of the (external) telephone number.

strUnformattedTelephoneNumber - Specifies an expression of the telephone number as an unparsible string.

setCertificationContactPhNo

public void setCertificationContactPhNo(ISingleCollection<XTN> objCertificationContactPhNoList)

Set the CertificationContactPhNo list.

Parameters:

objCertificationContactPhNoList - List of CertificationContactPhNo

setCertificationDtOrTm

public void setCertificationDtOrTm(java.lang.String strTime)

Set the Certification Dt Or Tm. This field contains the date and time stamp that indicates when insurance is certified to exist for the patient.

Parameters:

strTime - The point in time

setCertificationDtOrTm

public void setCertificationDtOrTm(DTM objcertificationDtOrTm)

Set the Certification Dt Or Tm. This field contains the date and time stamp that indicates when insurance is certified to exist for the patient.

Parameters:

objcertificationDtOrTm -

setCertificationEndDt

public void setCertificationEndDt(java.lang.String strcertificationEndDt)

Set the Certification End Dt. This field contains date that this certification ends.

Parameters:

strcertificationEndDt - Date till which certificationification is Valid

setCertificationEndDt

public void setCertificationEndDt(DT objcertificationEndDt)

Set the Certification End Dt. This field contains date that this certification ends.

Parameters:

objcertificationEndDt - Date till which certificationification is Valid

setCertificationModifyDateOrTime

public void setCertificationModifyDateOrTime(java.lang.String strTime)

Set the Certification Modify Dt Or Tm. This field contains the date/time that the certification is modify.

Parameters:

strTime - The point in time

setCertificationModifyDateOrTime

public void setCertificationModifyDateOrTime(DTM objcertificationModifyDtOrTm)

Set the Certification Modify Dt Or Tm. This field contains the date/time that the certification is modify.

Parameters:

objcertificationModifyDtOrTm -

setCertificationNo

public void setCertificationNo(java.lang.String strIDNumber,
                      java.lang.String strCheckDigit,
                      java.lang.String strCheckDigitScheme,
                      HD objAssigningAuthority,
                      java.lang.String strIdentifierTypeCode,
                      HD objAssigningFacility,
                      java.lang.String strEffectiveDate,
                      java.lang.String strExpirationDate,
                      CWE objAssigningJurisdiction,
                      CWE objAssigningAgencyOrDepartment,
                      java.lang.String strSecurityCheck,
                      java.lang.String strSecurityCheckScheme)

Set the Certification No. This field contains the number assigned by the certification agency.

Parameters:

strIDNumber - Specifies the value of the identifier itself.

strCheckDigit - It is part of the identifying number used in the sending application.

strCheckDigitScheme - Contains the code identifying the check digit scheme employed. Suggested Values NP,ISO,M10,M11.[Refer table No.0061].

objAssigningAuthority - The assigning authority is a unique name of the system (or organization or agency or department) that creates the data. .

strIdentifierTypeCode - Specifies a code corresponding to the type of identifier.In some cases, this code may be used as a qualifier to the "Assigning authority" component.[Refer table No 0203]

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the patient.

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepartment - Specifies agency or department that assigned the identifier.

strSecurityCheck - is used to communicate the version code.

objSecurityCheckSCheme - is used to transmit information intended to validate veracity of the supplied identifier

setCertificationNo

public void setCertificationNo(CX objcertificationNo)

Set the Certification No. This field contains the number assigned by the certification agency.

Parameters:

objcertificationNo -

setCertificationRequired

public void setCertificationRequired(java.lang.String strcertificationRequired)

Set the Certification Required. This field indicates whether certification is required or not.

Parameters:

strcertificationRequired - : Y/N

setCertificationRequired

public void setCertificationRequired(ID objcertificationRequired)

Set the Certification Required. This field indicates whether certification is required or not.

Parameters:

objcertificationRequired -

addCertifiedBy

public void addCertifiedBy(java.lang.String strIDNumber,
                  FN objFamilyName,
                  java.lang.String strGivenName,
                  java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof,
                  java.lang.String strSuffix,
                  java.lang.String strPrefix,
                  CWE objSourceTable,
                  HD objAssigningAuthority,
                  java.lang.String strNameTypeCode,
                  java.lang.String strIdentifierCheckDigit,
                  java.lang.String strCheckDigitScheme,
                  java.lang.String strIdentifierTypeCode,
                  HD objAssigningFacility,
                  java.lang.String strNameRepresentationCode,
                  CWE objNameContext,
                  java.lang.String strNameAssemblyOrder,
                  java.lang.String strEffectiveDate,
                  java.lang.String strExpirationDate,
                  java.lang.String strProfessionalSuffix,
                  CWE objAssigningJurisdiction,
                  CWE objAssigningAgencyOrDepratment,
                  java.lang.String strSecurityCheck,
                  java.lang.String strSecurityCheckScheme)

Set the Certified By. This field contains the party that approved the certification.

Parameters:

strIDNumber - Refers to the coded ID according to a user-defined table

objFamilyName - Specifies the surname of a person.

strGivenName - Specifies First name.

strSecondAndFurtherGivenNamesOrInitialsThereof - Specifies multiple middle names that may be included by separating them with spaces.

strSuffix - Used to specify a name suffix (e.g., Jr. or III).

strPrefix - Used to specify a name prefix (e.g., Dr.).

strSourceTable - Used as the HL7 identifier for the user-defined table of values for this component. [Refer User-defined Table 0297 - CN ID.]

objAssigningAuthority - Specifies a unique identifier of the system (or organization or agency of department) that creates the data. [Refer User-defined Table 0363 - Assigning authority]

strNameTypeCode - Specifies a code that represents the type of name.

strIdentifierCheckDigit - Specifies part of the identifying number used in the sending application.

strCheckDigitScheme - Specifies the code identifying the check digit scheme employed.[Refer HL7 Table 0061 - Check digit scheme].

strIdentifierTypeCode - Specifies A code corresponding to the type of identifier.[Refer HL7 Table 0203 - Identifier type].

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the person

strNameRepresentationCode - Provides an indication of the representation provided by the data item.

objNameContext - Designates the context in which a name is used. [Refer User-defined Table 0448 ]

strNameAssemblyOrder - Specifies a code that represents the preferred display order of the components of this person name. Suggested values are G,F[Refer table 0444.]

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

strProfessionalSuffix - Used to specify an abbreviation, or a string of abbreviations, denoting qualifications that support the person's profession, (e.g., licenses).

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepratment - Specifies the agency or department that assigned the identifier

strSecurityCheck - Specifies the version code that may be assigned to the person identifier

strSecurityCheckScheme - Specifies the check digit scheme.

addCertifiedBy

public void addCertifiedBy(XCN objCertifiedBy)

Set the Certified By. This field contains the party that approved the certification.

Parameters:

objCertifiedBy -

setCertifiedBy

public void setCertifiedBy(ISingleCollection<XCN> objCertifiedByList)

Set the CertifiedBy list.

Parameters:

objCertifiedByList - List of CertifiedBy

setDays

public void setDays(CWE objDayType,
           java.lang.String strNumberOfDays)

Set the Days. This field contains the number of days for which this certification is valid. This field applies to denied, pending, or approved days.

Parameters:

objDayType - Specifies whether the days are denied, pending, or approved.

strNumberOfDays - Specifies the number of days for which the certificationification is valid.

setDays

public void setDays(DTN objdays)

Set the Days. This field contains the number of days for which this certification is valid. This field applies to denied, pending, or approved days.

Parameters:

objdays -

setNonConcurCodeOrDesc

public void setNonConcurCodeOrDesc(java.lang.String strIdentifier,
                          java.lang.String strText,
                          java.lang.String strNameOfCodingSystem,
                          java.lang.String strAlternateIdentifier,
                          java.lang.String strAlternateText,
                          java.lang.String strNameOfAlternateCodingSystem,
                          java.lang.String strCodingSystemVersionID,
                          java.lang.String strAlternateCodingSystemVersionId,
                          java.lang.String strOriginalText,
                          java.lang.String strSecondAlternateIdentifier,
                          java.lang.String strSecondAlternateText,
                          java.lang.String strNameofSecondAlternateCodingSystem,
                          java.lang.String strSecondAlternateCodingSystemVersionID,
                          java.lang.String strCodingSystemOID,
                          java.lang.String strValueSetOID,
                          java.lang.String strValueSetVersionID,
                          java.lang.String strAlternateCodingSystemOID,
                          java.lang.String strAlternateValueSetOID,
                          java.lang.String strAlternateValueSetVersionID,
                          java.lang.String strSecondAlternateCodingSystemOID,
                          java.lang.String strSecondAlternateValueSetOID,
                          java.lang.String strSecondAlternateValueSetVersionID)

Set the Non Concur Code Or Desc. This field contains the non-concur code and description for a denied request.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setNonConcurCodeOrDesc

public void setNonConcurCodeOrDesc(CWE objnonConcurCodeOrDesc)

Set the Non Concur Code Or Desc. This field contains the non-concur code and description for a denied request.

Parameters:

objnonConcurCodeOrDesc -

setnonConcurEffectiveDtOrTm

public void setnonConcurEffectiveDtOrTm(java.lang.String strTime)

Set the Non Concur Effective Dt Or Tm. This field contains the effective date of the non-concurrence classification.

Parameters:

strTime - The point in time

setnonConcurEffectiveDtOrTm

public void setnonConcurEffectiveDtOrTm(DTM objnonConcurEffectiveDtOrTm)

Set the Non Concur Effective Dt Or Tm. This field contains the effective date of the non-concurrence classification.

Parameters:

objnonConcurEffectiveDtOrTm -

addOperator

public void addOperator(java.lang.String strIDNumber,
               FN objFamilyName,
               java.lang.String strGivenName,
               java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof,
               java.lang.String strSuffix,
               java.lang.String strPrefix,
               CWE objSourceTable,
               HD objAssigningAuthority,
               java.lang.String strNameTypeCode,
               java.lang.String strIdentifierCheckDigit,
               java.lang.String strCheckDigitScheme,
               java.lang.String strIdentifierTypeCode,
               HD objAssigningFacility,
               java.lang.String strNameRepresentationCode,
               CWE objNameContext,
               java.lang.String strNameAssemblyOrder,
               java.lang.String strEffectiveDate,
               java.lang.String strExpirationDate,
               java.lang.String strProfessionalSuffix,
               CWE objAssigningJurisdiction,
               CWE objAssigningAgencyOrDepratment,
               java.lang.String strSecurityCheck,
               java.lang.String strSecurityCheckScheme)

Set the Operator. This field contains the name party who is responsible for sending this certification information.

Parameters:

strIDNumber - Refers to the coded ID according to a user-defined table

objFamilyName - Specifies the surname of a person.

strGivenName - Specifies First name.

strSecondAndFurtherGivenNamesOrInitialsThereof - Specifies multiple middle names that may be included by separating them with spaces.

strSuffix - Used to specify a name suffix (e.g., Jr. or III).

strPrefix - Used to specify a name prefix (e.g., Dr.).

strSourceTable - Used as the HL7 identifier for the user-defined table of values for this component. [Refer User-defined Table 0297 - CN ID.]

objAssigningAuthority - Specifies a unique identifier of the system (or organization or agency of department) that creates the data. [Refer User-defined Table 0363 - Assigning authority]

strNameTypeCode - Specifies a code that represents the type of name.

strIdentifierCheckDigit - Specifies part of the identifying number used in the sending application.

strCheckDigitScheme - Specifies the code identifying the check digit scheme employed.[Refer HL7 Table 0061 - Check digit scheme].

strIdentifierTypeCode - Specifies A code corresponding to the type of identifier.[Refer HL7 Table 0203 - Identifier type].

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the person

strNameRepresentationCode - Provides an indication of the representation provided by the data item.

objNameContext - Designates the context in which a name is used. [Refer User-defined Table 0448 ]

strNameAssemblyOrder - Specifies a code that represents the preferred display order of the components of this person name. Suggested values are G,F[Refer table 0444.]

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

strProfessionalSuffix - Used to specify an abbreviation, or a string of abbreviations, denoting qualifications that support the person's profession, (e.g., licenses).

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepratment - Specifies the agency or department that assigned the identifier

strSecurityCheck - Specifies the version code that may be assigned to the person identifier

strSecurityCheckScheme - Specifies the check digit scheme.

addOperator

public void addOperator(XCN objOperator)

Set the Operator. This field contains the name party who is responsible for sending this certification information.

Parameters:

objOperator -

setOperator

public void setOperator(ISingleCollection<XCN> objOperatorList)

Set the Operator list.

Parameters:

objOperatorList - List of Operator

setPenalty

public void setPenalty(java.lang.String strMoneyOrPercentageIndicator,
              java.lang.String strMoneyOrPercentageQuantity,
              java.lang.String strCurrencyDenomination)

Set the Penalty. This field contains the penalty, in dollars or a percentage that will be assessed if the pre-certification is not performed.

Parameters:

strMoneyOrPercentageIndicator - Specifies whether the amount is currency or a percentage (AT/PC)

strMoneyOrPercentageQuantity - Specifies the currency or percentage quantity

strCurrencyDenomination - The denomination in which the quantity is expressed

setPenalty

public void setPenalty(MOP objpenalty)

Set the Penalty. This field contains the penalty, in dollars or a percentage that will be assessed if the pre-certification is not performed.

Parameters:

objpenalty -

addPhysicianReviewer

public void addPhysicianReviewer(java.lang.String strIDNumber,
                        FN objFamilyName,
                        java.lang.String strGivenName,
                        java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof,
                        java.lang.String strSuffix,
                        java.lang.String strPrefix,
                        CWE objSourceTable,
                        HD objAssigningAuthority,
                        java.lang.String strNameTypeCode,
                        java.lang.String strIdentifierCheckDigit,
                        java.lang.String strCheckDigitScheme,
                        java.lang.String strIdentifierTypeCode,
                        HD objAssigningFacility,
                        java.lang.String strNameRepresentationCode,
                        CWE objNameContext,
                        java.lang.String strNameAssemblyOrder,
                        java.lang.String strEffectiveDate,
                        java.lang.String strExpirationDate,
                        java.lang.String strProfessionalSuffix,
                        CWE objAssigningJurisdiction,
                        CWE objAssigningAgencyOrDepratment,
                        java.lang.String strSecurityCheck,
                        java.lang.String strSecurityCheckScheme)

Set the Physician Reviewer. This field contains the physician who works with and reviews cases that are pending physician review for the certification agency. Multiple names for the same person may be sent in this sequence.

Parameters:

strIDNumber - Refers to the coded ID according to a user-defined table

objFamilyName - Specifies the surname of a person.

strGivenName - Specifies First name.

strSecondAndFurtherGivenNamesOrInitialsThereof - Specifies multiple middle names that may be included by separating them with spaces.

strSuffix - Used to specify a name suffix (e.g., Jr. or III).

strPrefix - Used to specify a name prefix (e.g., Dr.).

strSourceTable - Used as the HL7 identifier for the user-defined table of values for this component. [Refer User-defined Table 0297 - CN ID.]

objAssigningAuthority - Specifies a unique identifier of the system (or organization or agency of department) that creates the data. [Refer User-defined Table 0363 - Assigning authority]

strNameTypeCode - Specifies a code that represents the type of name.

strIdentifierCheckDigit - Specifies part of the identifying number used in the sending application.

strCheckDigitScheme - Specifies the code identifying the check digit scheme employed.[Refer HL7 Table 0061 - Check digit scheme].

strIdentifierTypeCode - Specifies A code corresponding to the type of identifier.[Refer HL7 Table 0203 - Identifier type].

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the person

strNameRepresentationCode - Provides an indication of the representation provided by the data item.

objNameContext - Designates the context in which a name is used. [Refer User-defined Table 0448 ]

strNameAssemblyOrder - Specifies a code that represents the preferred display order of the components of this person name. Suggested values are G,F[Refer table 0444.]

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

strProfessionalSuffix - Used to specify an abbreviation, or a string of abbreviations, denoting qualifications that support the person's profession, (e.g., licenses).

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepratment - Specifies the agency or department that assigned the identifier

strSecurityCheck - Specifies the version code that may be assigned to the person identifier

strSecurityCheckScheme - Specifies the check digit scheme.

addPhysicianReviewer

public void addPhysicianReviewer(XCN objPhysicianReviewer)

Set the Physician Reviewer. This field contains the physician who works with and reviews cases that are pending physician review for the certification agency. Multiple names for the same person may be sent in this sequence.

Parameters:

objPhysicianReviewer -

setPhysicianReviewer

public void setPhysicianReviewer(ISingleCollection<XCN> objPhysicianReviewerList)

Set the PhysicianReviewer list.

Parameters:

objPhysicianReviewerList - List of PhysicianReviewer

addPrecertificationRequirement

public void addPrecertificationRequirement(CWE objCertificationPatientType,
                                  java.lang.String strcertificationRequired,
                                  DTM objDateOrTimecertificationRequired)

Set the Precertification Requirement. This field indicates whether pre-certification is required for particular patient types, and the time window for obtaining the certification.

Parameters:

objCertificationPatientType - Specifies Patient Type

strcertificationRequired - Specifies certificationification is required or not

objDateOrTimecertificationRequired - Specifies Date/Time by which pre-certificationification must be obtained

addPrecertificationRequirement

public void addPrecertificationRequirement(ICD objPrecertificationRequirement)

Set the Precertification Requirement. This field indicates whether pre-certification is required for particular patient types, and the time window for obtaining the certification.

Parameters:

objPrecertificationRequirement -

setPrecertificationRequirement

public void setPrecertificationRequirement(ISingleCollection<ICD> objPrecertificationRequirementList)

Set the PrecertificationRequirement list.

Parameters:

objPrecertificationRequirementList - List of PrecertificationRequirement

setSecondOpinionDate

public void setSecondOpinionDate(java.lang.String strSecondOpinionDate)

Set the Second Opinion Date. This field contains the date that the second opinion is obtained.

Parameters:

strSecondOpinionDate - Specifies date that the second opinion was obtained

setSecondOpinionDate

public void setSecondOpinionDate(DT objsecondOpinionDate)

Set the Second Opinion Date. This field contains the date that the second opinion is obtained.

Parameters:

objsecondOpinionDate - Specifies date that the second opinion was obtained

addSecondOpinionDocumentationReceived

public void addSecondOpinionDocumentationReceived(java.lang.String strIdentifier,
                                         java.lang.String strText,
                                         java.lang.String strNameOfCodingSystem,
                                         java.lang.String strAlternateIdentifier,
                                         java.lang.String strAlternateText,
                                         java.lang.String strNameOfAlternateCodingSystem,
                                         java.lang.String strCodingSystemVersionID,
                                         java.lang.String strAlternateCodingSystemVersionId,
                                         java.lang.String strOriginalText,
                                         java.lang.String strSecondAlternateIdentifier,
                                         java.lang.String strSecondAlternateText,
                                         java.lang.String strNameofSecondAlternateCodingSystem,
                                         java.lang.String strSecondAlternateCodingSystemVersionID,
                                         java.lang.String strCodingSystemOID,
                                         java.lang.String strValueSetOID,
                                         java.lang.String strValueSetVersionID,
                                         java.lang.String strAlternateCodingSystemOID,
                                         java.lang.String strAlternateValueSetOID,
                                         java.lang.String strAlternateValueSetVersionID,
                                         java.lang.String strSecondAlternateCodingSystemOID,
                                         java.lang.String strSecondAlternateValueSetOID,
                                         java.lang.String strSecondAlternateValueSetVersionID)

Set the Second Opinion Documentation Received. This field if accompanying documentation has been received by the provider.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

addSecondOpinionDocumentationReceived

public void addSecondOpinionDocumentationReceived(CWE objSecondOpinionDocumentationReceived)

Set the Second Opinion Documentation Received. This field if accompanying documentation has been received by the provider.

Parameters:

objSecondOpinionDocumentationReceived - No suggested Values specified

setSecondOpinionDocumentationReceived

public void setSecondOpinionDocumentationReceived(ISingleCollection<CWE> objSecondOpinionDocumentationReceivedList)

Set the SecondOpinionDocumentationReceived list.

Parameters:

objSecondOpinionDocumentationReceivedList - List of SecondOpinionDocumentationReceived

addSecondOpinionPhysician

public void addSecondOpinionPhysician(java.lang.String strIDNumber,
                             FN objFamilyName,
                             java.lang.String strGivenName,
                             java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof,
                             java.lang.String strSuffix,
                             java.lang.String strPrefix,
                             CWE objSourceTable,
                             HD objAssigningAuthority,
                             java.lang.String strNameTypeCode,
                             java.lang.String strIdentifierCheckDigit,
                             java.lang.String strCheckDigitScheme,
                             java.lang.String strIdentifierTypeCode,
                             HD objAssigningFacility,
                             java.lang.String strNameRepresentationCode,
                             CWE objNameContext,
                             java.lang.String strNameAssemblyOrder,
                             java.lang.String strEffectiveDate,
                             java.lang.String strExpirationDate,
                             java.lang.String strProfessionalSuffix,
                             CWE objAssigningJurisdiction,
                             CWE objAssigningAgencyOrDepratment,
                             java.lang.String strSecurityCheck,
                             java.lang.String strSecurityCheckScheme)

Set the Second Opinion Physician. This field contains an identifier and name of the physician who provided the second opinion. Multiple names and identifiers for the same person may be sent in this sequence.

Parameters:

strIDNumber - Refers to the coded ID according to a user-defined table

objFamilyName - Specifies the surname of a person.

strGivenName - Specifies First name.

strSecondAndFurtherGivenNamesOrInitialsThereof - Specifies multiple middle names that may be included by separating them with spaces.

strSuffix - Used to specify a name suffix (e.g., Jr. or III).

strPrefix - Used to specify a name prefix (e.g., Dr.).

strSourceTable - Used as the HL7 identifier for the user-defined table of values for this component. [Refer User-defined Table 0297 - CN ID.]

objAssigningAuthority - Specifies a unique identifier of the system (or organization or agency of department) that creates the data. [Refer User-defined Table 0363 - Assigning authority]

strNameTypeCode - Specifies a code that represents the type of name.

strIdentifierCheckDigit - Specifies part of the identifying number used in the sending application.

strCheckDigitScheme - Specifies the code identifying the check digit scheme employed.[Refer HL7 Table 0061 - Check digit scheme].

strIdentifierTypeCode - Specifies A code corresponding to the type of identifier.[Refer HL7 Table 0203 - Identifier type].

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the person

strNameRepresentationCode - Provides an indication of the representation provided by the data item.

objNameContext - Designates the context in which a name is used. [Refer User-defined Table 0448 ]

strNameAssemblyOrder - Specifies a code that represents the preferred display order of the components of this person name. Suggested values are G,F[Refer table 0444.]

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

strProfessionalSuffix - Used to specify an abbreviation, or a string of abbreviations, denoting qualifications that support the person's profession, (e.g., licenses).

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepratment - Specifies the agency or department that assigned the identifier

strSecurityCheck - Specifies the version code that may be assigned to the person identifier

strSecurityCheckScheme - Specifies the check digit scheme.

addSecondOpinionPhysician

public void addSecondOpinionPhysician(XCN objSecondOpinionPhysician)

Set the Second Opinion Physician. This field contains an identifier and name of the physician who provided the second opinion. Multiple names and identifiers for the same person may be sent in this sequence.

Parameters:

objSecondOpinionPhysician -

setSecondOpinionPhysician

public void setSecondOpinionPhysician(ISingleCollection<XCN> objSecondOpinionPhysicianList)

Set the SecondOpinionPhysician list.

Parameters:

objSecondOpinionPhysicianList - List of SecondOpinionPhysician

setSecondOpinionStatus

public void setSecondOpinionStatus(java.lang.String strIdentifier,
                          java.lang.String strText,
                          java.lang.String strNameOfCodingSystem,
                          java.lang.String strAlternateIdentifier,
                          java.lang.String strAlternateText,
                          java.lang.String strNameOfAlternateCodingSystem,
                          java.lang.String strCodingSystemVersionID,
                          java.lang.String strAlternateCodingSystemVersionId,
                          java.lang.String strOriginalText,
                          java.lang.String strSecondAlternateIdentifier,
                          java.lang.String strSecondAlternateText,
                          java.lang.String strNameofSecondAlternateCodingSystem,
                          java.lang.String strSecondAlternateCodingSystemVersionID,
                          java.lang.String strCodingSystemOID,
                          java.lang.String strValueSetOID,
                          java.lang.String strValueSetVersionID,
                          java.lang.String strAlternateCodingSystemOID,
                          java.lang.String strAlternateValueSetOID,
                          java.lang.String strAlternateValueSetVersionID,
                          java.lang.String strSecondAlternateCodingSystemOID,
                          java.lang.String strSecondAlternateValueSetOID,
                          java.lang.String strSecondAlternateValueSetVersionID)

Set the Second Opinion Status. This field contains the code that represents the status of the second opinion.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setSecondOpinionStatus

public void setSecondOpinionStatus(CWE objsecondOpinionStatus)

Set the Second Opinion Status. This field contains the code that represents the status of the second opinion.

Parameters:

objsecondOpinionStatus - Specifies the status of the second opinion

setSetID_IN3

public void setSetID_IN3(java.lang.String strSequenceID)

Set the Set ID IN3. This field contains the number that identifies this transaction.

Parameters:

strSequenceID - Specifies the sequence number

setSetID_IN3

public void setSetID_IN3(SI objsetID_IN3)

Set the Set ID IN3. This field contains the number that identifies this transaction.

Parameters:

objsetID_IN3 - Specifies the sequence number

setCertificationType

public void setCertificationType(java.lang.String strIdentifier,
                        java.lang.String strText,
                        java.lang.String strNameOfCodingSystem,
                        java.lang.String strAlternateIdentifier,
                        java.lang.String strAlternateText,
                        java.lang.String strNameOfAlternateCodingSystem,
                        java.lang.String strCodingSystemVersionID,
                        java.lang.String strAlternateCodingSystemVersionId,
                        java.lang.String strOriginalText,
                        java.lang.String strSecondAlternateIdentifier,
                        java.lang.String strSecondAlternateText,
                        java.lang.String strNameofSecondAlternateCodingSystem,
                        java.lang.String strSecondAlternateCodingSystemVersionID,
                        java.lang.String strCodingSystemOID,
                        java.lang.String strValueSetOID,
                        java.lang.String strValueSetVersionID,
                        java.lang.String strAlternateCodingSystemOID,
                        java.lang.String strAlternateValueSetOID,
                        java.lang.String strAlternateValueSetVersionID,
                        java.lang.String strSecondAlternateCodingSystemOID,
                        java.lang.String strSecondAlternateValueSetOID,
                        java.lang.String strSecondAlternateValueSetVersionID)

Set the Certification Type. This field contains the certification type code for a specific certification.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setCertificationType

public void setCertificationType(CWE objCertificationType)

Set the Certification Type. This field contains the certification type code for a specific certification.

Parameters:

objCertificationType - Used as CertificationType.

setCertificationCategory

public void setCertificationCategory(java.lang.String strIdentifier,
                            java.lang.String strText,
                            java.lang.String strNameOfCodingSystem,
                            java.lang.String strAlternateIdentifier,
                            java.lang.String strAlternateText,
                            java.lang.String strNameOfAlternateCodingSystem,
                            java.lang.String strCodingSystemVersionID,
                            java.lang.String strAlternateCodingSystemVersionId,
                            java.lang.String strOriginalText,
                            java.lang.String strSecondAlternateIdentifier,
                            java.lang.String strSecondAlternateText,
                            java.lang.String strNameofSecondAlternateCodingSystem,
                            java.lang.String strSecondAlternateCodingSystemVersionID,
                            java.lang.String strCodingSystemOID,
                            java.lang.String strValueSetOID,
                            java.lang.String strValueSetVersionID,
                            java.lang.String strAlternateCodingSystemOID,
                            java.lang.String strAlternateValueSetOID,
                            java.lang.String strAlternateValueSetVersionID,
                            java.lang.String strSecondAlternateCodingSystemOID,
                            java.lang.String strSecondAlternateValueSetOID,
                            java.lang.String strSecondAlternateValueSetVersionID)

Set the Certification Category. This field contains the certification category code for a specific certification.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setCertificationCategory

public void setCertificationCategory(CWE objCertificationCategory)

Set the Certification Category. This field contains the certification category code for a specific certification.

Parameters:

objCertificationCategory - Used as CertificationCategory.

validate

public boolean validate()
                 throws InvalidSegmentException

Validates HL7 Message objects . Validate method checks for validation each and every segments in side the Message object against specified message Structure. Validation chcecks include optionality of segment or group. It also verifies the number of times segment or group is repeated in message. e.g {PSH} while parsing PSH segment validate method will check for its mandatory presence. [PSH] in this case validate will throw exception if one tries to enter more than one PSH segment.

Specified by:

validate in interface ISegment

Overrides:

validate in class Segment

Returns:

boolean - true or false.

Throws:

InvalidSegmentException - Throws when Segment Validation fails