cdac.medinfo.sdk.hl7282.baselibs.segments

Class RXO

java.lang.Object

cdac.medinfo.sdk.hl7282.baselibs.segments.Segment

cdac.medinfo.sdk.hl7282.baselibs.segments.RXO

All Implemented Interfaces:

ISegment

public class RXO
extends Segment

RXO - Pharmacy/Treatment Order Segment.

RXO is the "master" pharmacy/treatment order segment.It contains order data not specific to components or additives.Unlike the OBR, it does not contain status fields or other data that are results-only.

Represents an HL7 RXO message segment. This segment has the following fields:

RXO-1: Requested Give Code (CWE)Conditional
RXO-2: Requested Give Amount - Minimum (NM)Conditional
RXO-3: Requested Give Amount - Maximum (NM)Optional
RXO-4: Requested Give Units (CWE)Optional
RXO-5: Requested Dosage Form (CWE)Conditional
RXO-6: Provider's Pharmacy/Treatment Instructions (CWE)Optional
RXO-7: Provider's Administration Instructions (CWE)Optional
RXO-8: Deliver-To Location (LA1)Withdrawn
RXO-9: Allow Substitutions (ID)Optional
RXO-10: Requested Dispense Code (CWE)Optional
RXO-11: Requested Dispense Amount (NM)Optional
RXO-12: Requested Dispense Units (CWE)Optional
RXO-13: Number Of Refills (NM)Optional
RXO-14: Ordering Provider's DEA Number (XCN)Backward
RXO-15: Pharmacist/Treatment Supplier's Verifier ID (XCN)Conditional
RXO-16: Needs Human Review (ID)Optional
RXO-17: Requested Give Per (Time Unit) (ST)Conditional
RXO-18: Requested Give Strength (NM)Optional
RXO-19: Requested Give Strength Units (CWE)Optional
RXO-20: Indication (CWE)Optional
RXO-21: Requested Give Rate Amount (ST)Optional
RXO-22: Requested Give Rate Units (CWE)Optional
RXO-23: Total Daily Dose (CQ)Optional
RXO-24: Supplementary Code (CWE)Optional
RXO-25: Requested Drug Strength Volume (NM)Optional
RXO-26: Requested Drug Strength Volume Units (CWE)Optional
RXO-27: Pharmacy Order Type (ID)Optional
RXO-28: Dispensing Interval (NM)Optional
RXO-29: Medication Instance Identifier (EI)Optional
RXO-30: Segment Instance Identifier (EI)Optional
RXO-31: Mood Code (CNE)Conditional
RXO-32: Dispensing Pharmacy (CWE)Backward
RXO-33: Dispensing Pharmacy Address (XAD)Backward
RXO-34: Deliver-to Patient Location (PL)Optional
RXO-35: Deliver-to Address (XAD)Optional
RXO-36: Pharmacy Phone Number(XTN)Optional

This class provides mechanism to validate message against HL7 v 2.8.2 standard. The class provides accessors & mutators for the elements mentioned above. The class has validate method which validates Message against HL7 v 2.8.2 standard.

User can also create Segment through SegmentFactory

Constructor Summary

Constructors

Constructor and Description
RXO() Constructs the RXO segment.

Method Summary

Methods

Modifier and Type	Method and Description
void	addIndication(CWE objindication) Add the Indication.
void	addIndication(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Add the Indication.
void	addOrderingProviderDEANo(java.lang.String strIDNumber, FN objFamilyName, java.lang.String strGivenName, java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof, java.lang.String strSuffix, java.lang.String strPrefix, CWE objSourceTable, HD objAssigningAuthority, java.lang.String strNameTypeCode, java.lang.String strIdentifierCheckDigit, java.lang.String strCheckDigitScheme, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strNameRepresentationCode, CWE objNameContext, java.lang.String strNameAssemblyOrder, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, java.lang.String strProfessionalSuffix, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepratment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Add the Ordering Provider DEA No.
void	addOrderingProviderDEANo(XCN objorderingProviderDEANo) Add the Ordering Provider DEA No.
void	addPharmacistTreatmentSupplierVerifierID(java.lang.String strIDNumber, FN objFamilyName, java.lang.String strGivenName, java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof, java.lang.String strSuffix, java.lang.String strPrefix, CWE objSourceTable, HD objAssigningAuthority, java.lang.String strNameTypeCode, java.lang.String strIdentifierCheckDigit, java.lang.String strCheckDigitScheme, java.lang.String strIdentifierTypeCode, HD objAssigningFacility, java.lang.String strNameRepresentationCode, CWE objNameContext, java.lang.String strNameAssemblyOrder, java.lang.String strEffectiveDate, java.lang.String strExpirationDate, java.lang.String strProfessionalSuffix, CWE objAssigningJurisdiction, CWE objAssigningAgencyOrDepratment, java.lang.String strSecurityCheck, java.lang.String strSecurityCheckScheme) Add the Pharmacist Treatment Supplier Verifier ID.
void	addPharmacistTreatmentSupplierVerifierID(XCN objpharmacistTreatmentSupplierVerifierID) Add the Pharmacist Treatment Supplier Verifier ID.
void	addPharmacyPhoneNumber(java.lang.String strTeleCommunicationUseCode, java.lang.String strTeleCommunicationEquipmentType, java.lang.String strCommuinicationAddress, java.lang.String strCountryCode, java.lang.String strAreaCityCode, java.lang.String strLocalNumber, java.lang.String strExtension, java.lang.String strAnyText, java.lang.String strExtensionPrefix, java.lang.String strSpeedDialCode, java.lang.String strUnformattedTelephoneNumber, java.lang.String strEffectiveStartDate, java.lang.String strExpirationDate, CWE objExpirationReason, CWE objProtectionCode, EI objSharedTelecommunicationIdentifier, java.lang.String strPreferenceOrder) Set the Pharmacy Phone Number.
void	addPharmacyPhoneNumber(XTN objtempPharmacyPhoneNumber) Sets the Pharmacy Phone Number.
void	addProviderPharmacyTreatmentInstructions(CWE objproviderPharmacyTreatmentInstructions) Add the Provider Pharmacy Treatment Instructions.
void	addProviderPharmacyTreatmentInstructions(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Add the Provider Pharmacy Treatment Instructions.
void	addProvidersAdministrationInstructions(CWE objprovidersAdministrationInstructions) Add the Providers Administration Instructions.
void	addProvidersAdministrationInstructions(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Add the Providers Administration Instructions.
void	addSupplementaryCode(CWE objsupplementaryCode) Add the Supplementary Code.
void	addSupplementaryCode(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Add the Supplementary Code.
ID	getAllowSubstitutions() Retrieves the Allow Substitutions.
XAD	getDeliverToAddress() Retrieves the Deliver-to Address.
PL	getDeliverToPatientLocation() Retrieves the Deliver-to Patient Location.
NM	getDispensingInterval() Retrieves the Dispensing Interval
CWE	getDispensingPharmacy() Retrieves the Dispensing Pharmacy.
XAD	getDispensingPharmacyAddress() Retrieves the Dispensing Pharmacy Address.
ISingleCollection<CWE>	getIndication() Retrieves the Indication.
EI	getMedicationInstanceIdentifier() Retrieves the Medication Instance Identifier This field contains a value that uniquely identifies the medication associated with this segment.
CNE	getMoodCode() Retrieves the Mood Code.
ID	getNeedsHumanReview() Retrieves the Needs Human Review.
NM	getNoOfRefills() Retrieves the No Of Refills.
ISingleCollection<XCN>	getOrderingProviderDEANo() Retrieves the Ordering Provider DEA No.
ISingleCollection<XCN>	getPharmacistTreatmentSupplierVerifierID() Retrieves the Pharmacist Treatment Supplier Verifier ID.
ID	getPharmacyOrderType() Retrieves the Pharmacy Order Type.
ISingleCollection<XTN>	getPharmacyPhoneNumber() Retrieves the Pharmacy Phone Number.
ISingleCollection<CWE>	getProviderPharmacyTreatmentInstructions() Retrieves the Provider Pharmacy Treatment Instructions.
ISingleCollection<CWE>	getProvidersAdministrationInstructions() Retrieves the Providers Administration Instructions.
NM	getRequestedDispenseAmount() Retrieves the Requested Dispense Amount.
CWE	getRequestedDispenseCode() Retrieves the Requested Dispense Code.
CWE	getRequestedDispenseUnits() Retrieves the Requested Dispense Units.
CWE	getRequestedDosageForm() Retrieves the Requested Dosage Form.
NM	getRequestedDrugStrengthVolume() Retrieves the Requested Drug Strength Volume.
CWE	getRequestedDrugStrengthVolumeUnits() Retrieves the Requested Drug Strength Volume Units.
NM	getRequestedGiveAmt_Max() Retrieves the Requested Give Amt Max.
NM	getRequestedGiveAmt_Min() Retrieves the Requested Give Amt Min.
CWE	getRequestedGiveCode() Retrieves the Requested Give Code.
ST	getRequestedGivePer() Retrieves the Requested Give Per.
ST	getRequestedGiveRateAmt() Retrieves the Requested Give Rate Amt.
CWE	getRequestedGiveRateUnits() Retrieves the Requested Give Rate Units.
NM	getRequestedGiveStrength() Retrieves the Requested Give Strength.
CWE	getRequestedGiveStrengthUnits() Retrieves the Requested Give Strength Units.
CWE	getRequestedGiveUnits() Retrieves the Requested Give Units.
EI	getSegmentInstanceIdentifier() Retrieves the Segment Instance Identifier This field contains a value that uniquely identifies this segment across time and messages.
ISingleCollection<CWE>	getSupplementaryCode() Retrieves the Supplementary Code.
CQ	getTotalDailyDose() Retrieves the Total Daily Dose.
void	setAllowSubstitutions(ID objallowSubstitutions) Set the Allow Substitutions.
void	setAllowSubstitutions(java.lang.String strAllowSubstitutions) Set the Allow Substitutions.
void	setDeliverToAddress(SAD objStreetAddress, java.lang.String strOtherDesignation, java.lang.String strCity, java.lang.String strStateOrProvince, java.lang.String strZipOrPostalCode, java.lang.String strCountry, java.lang.String strAddressType, java.lang.String strOtherGeographicDesignation, CWE objCountyParishCode, CWE objCensusTract, java.lang.String strAddressRepresentationCode, DTM objEffectiveDate, DTM objExpirationDate, CWE objEXpirationReason, java.lang.String strTemporaryIndicator, java.lang.String strBadAddressIndicator, java.lang.String strAddressUsage, java.lang.String strAddressee, java.lang.String strComment, java.lang.String strPreferenceOrder, CWE objProtectionCode, EI objAddressIdentifier) Set the Deliver-to Address.
void	setDeliverToAddress(XAD objDeliverToAddress) Set the BP Deliver-to Address.
void	setDeliverToPatientLocation(HD objPointOfCare, HD objRoom, HD objBed, HD objFacility, java.lang.String strLocationStatus, java.lang.String strPersonLocationType, java.lang.String strBuilding, java.lang.String strFloor, java.lang.String strLocationDescription, EI objComprehensiveLocationIdentifier, HD objAssigningAuthorityForLocation) Set the Deliver-to Patient Location.
void	setDeliverToPatientLocation(PL objbDeliverToPatientLocation) Set the Deliver-to Patient Location.
void	setDispensingInterval(NM objdispensingInterval) Set the Dispensing Interval.
void	setDispensingInterval(java.lang.String strDispensingInterval) Set the Dispensing Interval
void	setDispensingPharmacy(CWE objrequestedGiveUnits) Set the Dispensing Pharmacy.
void	setDispensingPharmacy(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Dispensing Pharmacy.
void	setDispensingPharmacyAddress(SAD objStreetAddress, java.lang.String strOtherDesignation, java.lang.String strCity, java.lang.String strStateOrProvince, java.lang.String strZipOrPostalCode, java.lang.String strCountry, java.lang.String strAddressType, java.lang.String strOtherGeographicDesignation, CWE objCountyParishCode, CWE objCensusTract, java.lang.String strAddressRepresentationCode, DTM objEffectiveDate, DTM objExpirationDate, CWE objEXpirationReason, java.lang.String strTemporaryIndicator, java.lang.String strBadAddressIndicator, java.lang.String strAddressUsage, java.lang.String strAddressee, java.lang.String strComment, java.lang.String strPreferenceOrder, CWE objProtectionCode, EI objAddressIdentifier) Set the Dispensing Pharmacy Address.
void	setDispensingPharmacyAddress(XAD objbPIntendedDispenseFromAddress) Set the Dispensing Pharmacy Address.
void	setIndication(ISingleCollection<CWE> objindicationList) Set the Indication.
void	setMedicationInstanceIdentifier(EI objcpLotNumber) Set the Medication Instance Identifier This field contains a value that uniquely identifies the medication associated with this segment.
void	setMedicationInstanceIdentifier(java.lang.String strEntityIdentifier, java.lang.String strNamespaceId, java.lang.String strUniversalId, java.lang.String strUniversalIdType) Set the Medication Instance Identifier This field contains a value that uniquely identifies the medication associated with this segment.
void	setMoodCode(CNE objbcBloodGroup) Set the Mood Code.
void	setMoodCode(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionID, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameOfSecondAltenateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Mood Code.
void	setNeedsHumanReview(ID objneedsHumanReview) Set the Needs Human Review.
void	setNeedsHumanReview(java.lang.String strNeedsHumanReview) Set the Needs Human Review.
void	setNoOfRefills(NM objnoOfRefills) Set the No Of Refills.
void	setNoOfRefills(java.lang.String strNoOfRefills) Set the No Of Refills.
void	setOrderingProviderDEANo(ISingleCollection<XCN> objorderingProviderDEANoList) Set the Ordering Provider DEA No.
void	setPharmacistTreatmentSupplierVerifierID(ISingleCollection<XCN> objpharmacistTreatmentSupplierVerifierIDList) Set the Pharmacist Treatment Supplier Verifier ID.
void	setPharmacyOrderType(ID objpharmacyOrderType) Set the Pharmacy Order Type.
void	setPharmacyOrderType(java.lang.String strPharmacyOrderType) Set the Pharmacy Order Type.
void	setPharmacyPhoneNumber(ISingleCollection<XTN> objPharmacyPhoneNumber) Set the Pharmacy Phone Number.
void	setProviderPharmacyTreatmentInstructions(ISingleCollection<CWE> objproviderPharmacyTreatmentInstructionsList) Set the Provider Pharmacy Treatment Instructions.
void	setProvidersAdministrationInstructions(ISingleCollection<CWE> objprovidersAdministrationInstructionsList) Set the Providers Administration Instructions.
void	setRequestedDispenseAmount(NM objrequestedDispenseAmount) Set the Requested Dispense Amount.
void	setRequestedDispenseAmount(java.lang.String strRequestedDispenseAmount) Set the Requested Dispense Amount.
void	setRequestedDispenseCode(CWE objrequestedDispenseCode) Set the Requested Dispense Code.
void	setRequestedDispenseCode(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Requested Dispense Code.
void	setRequestedDispenseUnits(CWE objrequestedDispenseUnits) Set the Requested Dispense Units.
void	setRequestedDispenseUnits(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Requested Dispense Units.
void	setRequestedDosageForm(CWE objrequestedDosageForm) Set the Requested Dosage Form.
void	setRequestedDosageForm(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Requested Dosage Form.
void	setRequestedDrugStrengthVolume(NM objrequestedDrugStrengthVolume) Set the Requested Drug Strength Volume.
void	setRequestedDrugStrengthVolume(java.lang.String strRequestedDrugStrengthVolume) Set the Requested Drug Strength Volume.
void	setRequestedDrugStrengthVolumeUnits(CWE objrequestedDrugStrengthVolumeUnits) Set the Requested Drug Strength Volume Units.
void	setRequestedDrugStrengthVolumeUnits(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Requested Drug Strength Volume Units.
void	setRequestedGiveAmt_Max(NM objrequestedGiveAmt_Max) Set the Requested Give Amt Max.
void	setRequestedGiveAmt_Max(java.lang.String strRequestedGiveAmt_Max) Set the Requested Give Amt Max.
void	setRequestedGiveAmt_Min(NM objrequestedGiveAmt_Min) Set the Requested Give Amt Min.
void	setRequestedGiveAmt_Min(java.lang.String strRequestedGiveAmt_Min) Set the Requested Give Amt Min.
void	setRequestedGiveCode(CWE objrequestedGiveCode) Set the Requested Give Code.
void	setRequestedGiveCode(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Requested Give Code.
void	setRequestedGivePer(ST objrequestedGivePer) Set the Requested Give Per.
void	setRequestedGivePer(java.lang.String strRequestedGivePer) Set the Requested Give Per.
void	setRequestedGiveRateAmt(ST objrequestedGiveRateAmt) Set the Requested Give Rate Amt.
void	setRequestedGiveRateAmt(java.lang.String strRequestedGiveRateAmt) Set the Requested Give Rate Amt.
void	setRequestedGiveRateUnits(CWE objrequestedGiveRateUnits) Set the Requested Give Rate Units.
void	setRequestedGiveRateUnits(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Requested Give Rate Units.
void	setRequestedGiveStrength(NM objrequestedGiveStrength) Set the Requested Give Strength.
void	setRequestedGiveStrength(java.lang.String strRequestedGiveStrength) Set the Requested Give Strength.
void	setRequestedGiveStrengthUnits(CWE objrequestedGiveStrengthUnits) Set the Requested Give Strength Units.
void	setRequestedGiveStrengthUnits(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Requested Give Strength Units.
void	setRequestedGiveUnits(CWE objrequestedGiveUnits) Set the Requested Give Units.
void	setRequestedGiveUnits(java.lang.String strIdentifier, java.lang.String strText, java.lang.String strNameOfCodingSystem, java.lang.String strAlternateIdentifier, java.lang.String strAlternateText, java.lang.String strNameOfAlternateCodingSystem, java.lang.String strCodingSystemVersionID, java.lang.String strAlternateCodingSystemVersionId, java.lang.String strOriginalText, java.lang.String strSecondAlternateIdentifier, java.lang.String strSecondAlternateText, java.lang.String strNameofSecondAlternateCodingSystem, java.lang.String strSecondAlternateCodingSystemVersionID, java.lang.String strCodingSystemOID, java.lang.String strValueSetOID, java.lang.String strValueSetVersionID, java.lang.String strAlternateCodingSystemOID, java.lang.String strAlternateValueSetOID, java.lang.String strAlternateValueSetVersionID, java.lang.String strSecondAlternateCodingSystemOID, java.lang.String strSecondAlternateValueSetOID, java.lang.String strSecondAlternateValueSetVersionID) Set the Requested Give Units.
void	setSegmentInstanceIdentifier(EI objcpLotNumber) Set the Medication Instance Identifier This field contains a value that uniquely identifies this segment across time and messages.
void	setSegmentInstanceIdentifier(java.lang.String strEntityIdentifier, java.lang.String strNamespaceId, java.lang.String strUniversalId, java.lang.String strUniversalIdType) Set the Segment Instance Identifier This field contains a value that uniquely identifies this segment across time and messages.
void	setSupplementaryCode(ISingleCollection<CWE> objsupplementaryCodeList) Set the Supplementary Code.
void	setTotalDailyDose(CQ objtotalDailyDose) Set the Total Daily Dose.
void	setTotalDailyDose(java.lang.String strQuantity, CWE objUnits) Set the Total Daily Dose.
boolean	validate() Validates HL7 Message objects .

Methods inherited from class cdac.medinfo.sdk.hl7282.baselibs.segments.Segment

addUnRecognizedField, dumpSegment, getFields, getName, getUnrecognizedFields, moveToNextSegment, parse, removeDataElement, removeDataElement, serialize, setName, setUnRecognizedField, updateDataElement, updateDataElement, writeToXML

Methods inherited from class java.lang.Object

equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

RXO

public RXO()

Constructs the RXO segment.

Method Detail

getAllowSubstitutions

public ID getAllowSubstitutions()

Retrieves the Allow Substitutions.

Returns:

ID - allowSubstitutions

getDispensingInterval

public NM getDispensingInterval()

Retrieves the Dispensing Interval

Returns:

NM - dispensingInterval

getIndication

public ISingleCollection<CWE> getIndication()

Retrieves the Indication. This field specify the condition or problem for which the drug/treatment is prescribed.

Returns:

ISingleCollection - indication

getNeedsHumanReview

public ID getNeedsHumanReview()

Retrieves the Needs Human Review. This field uses Yes/No Indicator.

Returns:

ID - needsHumanReview

getNoOfRefills

public NM getNoOfRefills()

Retrieves the No Of Refills. This field specify the number of times the request dispense amount can be given to the patient, subject to local regulation.

Returns:

NM - noOfRefills

getOrderingProviderDEANo

public ISingleCollection<XCN> getOrderingProviderDEANo()

Retrieves the Ordering Provider DEA No.

Returns:

ISingleCollection - orderingProviderDEANo

getPharmacistTreatmentSupplierVerifierID

public ISingleCollection<XCN> getPharmacistTreatmentSupplierVerifierID()

Retrieves the Pharmacist Treatment Supplier Verifier ID.

Returns:

ISingleCollection - pharmacistTreatmentSupplierVerifierID

getPharmacyOrderType

public ID getPharmacyOrderType()

Retrieves the Pharmacy Order Type. This field specify the general category of pharmacy order which may be used to determine the processing path the order will take.

Returns:

ID - pharmacyOrderType

getProviderPharmacyTreatmentInstructions

public ISingleCollection<CWE> getProviderPharmacyTreatmentInstructions()

Retrieves the Provider Pharmacy Treatment Instructions.

Returns:

ISingleCollection - providerPharmacyTreatmentInstructions

getProvidersAdministrationInstructions

public ISingleCollection<CWE> getProvidersAdministrationInstructions()

Retrieves the Providers Administration Instructions. This field specify the ordering provider's instructions to the patient or to the provider administering the drug or treatment.

Returns:

ISingleCollection - providersAdministrationInstructions

getRequestedDispenseAmount

public NM getRequestedDispenseAmount()

Retrieves the Requested Dispense Amount.

Returns:

NM - requestedDispenseAmount

getRequestedDispenseCode

public CWE getRequestedDispenseCode()

Retrieves the Requested Dispense Code.

Returns:

CWE - requestedDispenseCode

getRequestedDispenseUnits

public CWE getRequestedDispenseUnits()

Retrieves the Requested Dispense Units.

Returns:

CWE - requestedDispenseUnits

getRequestedDosageForm

public CWE getRequestedDosageForm()

Retrieves the Requested Dosage Form.

Returns:

CWE - requestedDosageForm

getRequestedDrugStrengthVolume

public NM getRequestedDrugStrengthVolume()

Retrieves the Requested Drug Strength Volume. This field specify the drug concentration contained in measure volume.

Returns:

NM - requestedDrugStrengthVolume

getRequestedDrugStrengthVolumeUnits

public CWE getRequestedDrugStrengthVolumeUnits()

Retrieves the Requested Drug Strength Volume Units.

Returns:

CWE - requestedDrugStrengthVolumeUnits

getRequestedGiveAmt_Max

public NM getRequestedGiveAmt_Max()

Retrieves the Requested Give Amt Max.

Returns:

NM - requestedGiveAmt_Max

getRequestedGiveAmt_Min

public NM getRequestedGiveAmt_Min()

Retrieves the Requested Give Amt Min.

Returns:

NM - requestedGiveAmt_Min

getRequestedGiveCode

public CWE getRequestedGiveCode()

Retrieves the Requested Give Code. This field specify the treatment product or treatment ordered to be given to the patient

Returns:

CWE - requestedGiveCode

getRequestedGivePer

public ST getRequestedGivePer()

Retrieves the Requested Give Per. This field specify the time unit to use to calculate the rate at which the pharmaceutical is to be administered.

Returns:

ST - requestedGivePer

getRequestedGiveRateAmt

public ST getRequestedGiveRateAmt()

Retrieves the Requested Give Rate Amt.

Returns:

ST - requestedGiveRateAmt

getRequestedGiveRateUnits

public CWE getRequestedGiveRateUnits()

Retrieves the Requested Give Rate Units.

Returns:

CWE - requestedGiveRateUnits

getRequestedGiveStrength

public NM getRequestedGiveStrength()

Retrieves the Requested Give Strength.

Returns:

NM - requestedGiveStrength

getRequestedGiveStrengthUnits

public CWE getRequestedGiveStrengthUnits()

Retrieves the Requested Give Strength Units.

Returns:

CWE - requestedGiveStrengthUnits

getRequestedGiveUnits

public CWE getRequestedGiveUnits()

Retrieves the Requested Give Units.

Returns:

CWE - requestedGiveUnits

getSupplementaryCode

public ISingleCollection<CWE> getSupplementaryCode()

Retrieves the Supplementary Code. This field specify that identification of any codes that might be associated with the pharmaceutical substance.

Returns:

ISingleCollection - supplementaryCode

getTotalDailyDose

public CQ getTotalDailyDose()

Retrieves the Total Daily Dose.

Returns:

CQ - totalDailyDose

getMedicationInstanceIdentifier

public EI getMedicationInstanceIdentifier()

Retrieves the Medication Instance Identifier This field contains a value that uniquely identifies the medication associated with this segment. Rather than identifying the product to be given, as in RXO-1 Requested Give Code, this field serves to identify the medication in association with the order represented by the segment instance. This identifier is persistent within and across message instances.

Returns:

EI - Medication Instance Identifier

getSegmentInstanceIdentifier

public EI getSegmentInstanceIdentifier()

Retrieves the Segment Instance Identifier This field contains a value that uniquely identifies this segment across time and messages.

Returns:

EI - Segment Instance Identifier

getMoodCode

public CNE getMoodCode()

Retrieves the Mood Code. This field represents the functional state of the order represented by this segment instance.

Returns:

CNE - bcBloodGroup

getDispensingPharmacy

public CWE getDispensingPharmacy()

Retrieves the Dispensing Pharmacy. This field is retained for backward compatibility only as of v 27. The information formerly communicated using this field should now be communicated using the PRT segment.

Returns:

CWE - requestedGiveStrengthUnits

getDispensingPharmacyAddress

public XAD getDispensingPharmacyAddress()

Retrieves the Dispensing Pharmacy Address. This field is retained for backward compatibility only as of v 27. The information formerly communicated using this field should now be communicated using the PRT segment.

Returns:

XAD - Dispensing Pharmacy Address

getDeliverToPatientLocation

public PL getDeliverToPatientLocation()

Retrieves the Deliver-to Patient Location. This field specifies the location of the patient to whom the pharmaceutical substance is to be delivered.

Returns:

PL - bPRequestedDispenseToLocation

getDeliverToAddress

public XAD getDeliverToAddress()

Retrieves the Deliver-to Address. This field specifies the address, either mailing or physical, to which the prescription should be mailed or delivered.

Returns:

XAD - Deliver-to Address

setAllowSubstitutions

public void setAllowSubstitutions(java.lang.String strAllowSubstitutions)

Set the Allow Substitutions.

Parameters:

strAllowSubstitutions - Specifies Allow Substitutions.

setAllowSubstitutions

public void setAllowSubstitutions(ID objallowSubstitutions)

Set the Allow Substitutions.

Parameters:

objallowSubstitutions - Object of Allow Substitutions.

setDispensingInterval

public void setDispensingInterval(java.lang.String strDispensingInterval)

Set the Dispensing Interval

Parameters:

strDispensingInterval - Specifies Dispensing Interval.

setDispensingInterval

public void setDispensingInterval(NM objdispensingInterval)

Set the Dispensing Interval.

Parameters:

objdispensingInterval - Object of Dispensing Interval.

addIndication

public void addIndication(java.lang.String strIdentifier,
                 java.lang.String strText,
                 java.lang.String strNameOfCodingSystem,
                 java.lang.String strAlternateIdentifier,
                 java.lang.String strAlternateText,
                 java.lang.String strNameOfAlternateCodingSystem,
                 java.lang.String strCodingSystemVersionID,
                 java.lang.String strAlternateCodingSystemVersionId,
                 java.lang.String strOriginalText,
                 java.lang.String strSecondAlternateIdentifier,
                 java.lang.String strSecondAlternateText,
                 java.lang.String strNameofSecondAlternateCodingSystem,
                 java.lang.String strSecondAlternateCodingSystemVersionID,
                 java.lang.String strCodingSystemOID,
                 java.lang.String strValueSetOID,
                 java.lang.String strValueSetVersionID,
                 java.lang.String strAlternateCodingSystemOID,
                 java.lang.String strAlternateValueSetOID,
                 java.lang.String strAlternateValueSetVersionID,
                 java.lang.String strSecondAlternateCodingSystemOID,
                 java.lang.String strSecondAlternateValueSetOID,
                 java.lang.String strSecondAlternateValueSetVersionID)

Add the Indication. This field specify the condition or problem for which the drug/treatment is prescribed.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

addIndication

public void addIndication(CWE objindication)

Add the Indication. This field specify the condition or problem for which the drug/treatment is prescribed.

Parameters:

objindication - Object of Indication.

getPharmacyPhoneNumber

public ISingleCollection<XTN> getPharmacyPhoneNumber()

Retrieves the Pharmacy Phone Number. This field contains the telecommunication contact information for the pharmacy.

Returns:

ISingleCollection - Pharmacy Phone Number

setIndication

public void setIndication(ISingleCollection<CWE> objindicationList)

Set the Indication. This field specify the condition or problem for which the drug/treatment is prescribed.

Parameters:

objindicationList - List of Indication.

setNeedsHumanReview

public void setNeedsHumanReview(java.lang.String strNeedsHumanReview)

Set the Needs Human Review. This field uses Yes/No Indicator.

Parameters:

strNeedsHumanReview - Specifies Needs Human Review.

setNeedsHumanReview

public void setNeedsHumanReview(ID objneedsHumanReview)

Set the Needs Human Review. This field uses Yes/No Indicator.

Parameters:

objneedsHumanReview - Object of

setNoOfRefills

public void setNoOfRefills(java.lang.String strNoOfRefills)

Set the No Of Refills. This field specify the number of times the request dispense amount can be given to the patient, subject to local regulation.

Parameters:

strNoOfRefills - Specifies Number Of Refills.

setNoOfRefills

public void setNoOfRefills(NM objnoOfRefills)

Set the No Of Refills. This field specify the number of times the request dispense amount can be given to the patient, subject to local regulation.

Parameters:

objnoOfRefills - Object of No Of Refills.

addOrderingProviderDEANo

public void addOrderingProviderDEANo(java.lang.String strIDNumber,
                            FN objFamilyName,
                            java.lang.String strGivenName,
                            java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof,
                            java.lang.String strSuffix,
                            java.lang.String strPrefix,
                            CWE objSourceTable,
                            HD objAssigningAuthority,
                            java.lang.String strNameTypeCode,
                            java.lang.String strIdentifierCheckDigit,
                            java.lang.String strCheckDigitScheme,
                            java.lang.String strIdentifierTypeCode,
                            HD objAssigningFacility,
                            java.lang.String strNameRepresentationCode,
                            CWE objNameContext,
                            java.lang.String strNameAssemblyOrder,
                            java.lang.String strEffectiveDate,
                            java.lang.String strExpirationDate,
                            java.lang.String strProfessionalSuffix,
                            CWE objAssigningJurisdiction,
                            CWE objAssigningAgencyOrDepratment,
                            java.lang.String strSecurityCheck,
                            java.lang.String strSecurityCheckScheme)

Add the Ordering Provider DEA No.

Parameters:

strIDNumber - Refers to the coded ID according to a user-defined table

objFamilyName - Specifies the surname of a person.

strGivenName - Specifies First name.

strSecondAndFurtherGivenNamesOrInitialsThereof - Specifies multiple middle names that may be included by separating them with spaces.

strSuffix - Used to specify a name suffix (e.g., Jr. or III).

strPrefix - Used to specify a name prefix (e.g., Dr.).

strSourceTable - Used as the HL7 identifier for the user-defined table of values for this component. [Refer User-defined Table 0297 - CN ID.]

objAssigningAuthority - Specifies a unique identifier of the system (or organization or agency of department) that creates the data. [Refer User-defined Table 0363 - Assigning authority]

strNameTypeCode - Specifies a code that represents the type of name.

strIdentifierCheckDigit - Specifies part of the identifying number used in the sending application.

strCheckDigitScheme - Specifies the code identifying the check digit scheme employed.[Refer HL7 Table 0061 - Check digit scheme].

strIdentifierTypeCode - Specifies A code corresponding to the type of identifier.[Refer HL7 Table 0203 - Identifier type].

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the person

strNameRepresentationCode - Provides an indication of the representation provided by the data item.

objNameContext - Designates the context in which a name is used. [Refer User-defined Table 0448 ]

strNameAssemblyOrder - Specifies a code that represents the preferred display order of the components of this person name. Suggested values are G,F[Refer table 0444.]

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

strProfessionalSuffix - Used to specify an abbreviation, or a string of abbreviations, denoting qualifications that support the person's profession, (e.g., licenses).

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepratment - Specifies the agency or department that assigned the identifier

strSecurityCheck - Specifies the version code that may be assigned to the person identifier

strSecurityCheckScheme - Specifies the check digit scheme.

addOrderingProviderDEANo

public void addOrderingProviderDEANo(XCN objorderingProviderDEANo)

Add the Ordering Provider DEA No.

Parameters:

objorderingProviderDEANo - Object of Ordering Provider DEA No.

setOrderingProviderDEANo

public void setOrderingProviderDEANo(ISingleCollection<XCN> objorderingProviderDEANoList)

Set the Ordering Provider DEA No.

Parameters:

objorderingProviderDEANoList - List of Ordering Provider DEA No.

addPharmacistTreatmentSupplierVerifierID

public void addPharmacistTreatmentSupplierVerifierID(java.lang.String strIDNumber,
                                            FN objFamilyName,
                                            java.lang.String strGivenName,
                                            java.lang.String strSecondAndFurtherGivenNamesOrInitialsThereof,
                                            java.lang.String strSuffix,
                                            java.lang.String strPrefix,
                                            CWE objSourceTable,
                                            HD objAssigningAuthority,
                                            java.lang.String strNameTypeCode,
                                            java.lang.String strIdentifierCheckDigit,
                                            java.lang.String strCheckDigitScheme,
                                            java.lang.String strIdentifierTypeCode,
                                            HD objAssigningFacility,
                                            java.lang.String strNameRepresentationCode,
                                            CWE objNameContext,
                                            java.lang.String strNameAssemblyOrder,
                                            java.lang.String strEffectiveDate,
                                            java.lang.String strExpirationDate,
                                            java.lang.String strProfessionalSuffix,
                                            CWE objAssigningJurisdiction,
                                            CWE objAssigningAgencyOrDepratment,
                                            java.lang.String strSecurityCheck,
                                            java.lang.String strSecurityCheckScheme)

Add the Pharmacist Treatment Supplier Verifier ID.

Parameters:

strIDNumber - Refers to the coded ID according to a user-defined table

objFamilyName - Specifies the surname of a person.

strGivenName - Specifies First name.

strSecondAndFurtherGivenNamesOrInitialsThereof - Specifies multiple middle names that may be included by separating them with spaces.

strSuffix - Used to specify a name suffix (e.g., Jr. or III).

strPrefix - Used to specify a name prefix (e.g., Dr.).

strSourceTable - Used as the HL7 identifier for the user-defined table of values for this component. [Refer User-defined Table 0297 - CN ID.]

objAssigningAuthority - Specifies a unique identifier of the system (or organization or agency of department) that creates the data. [Refer User-defined Table 0363 - Assigning authority]

strNameTypeCode - Specifies a code that represents the type of name.

strIdentifierCheckDigit - Specifies part of the identifying number used in the sending application.

strCheckDigitScheme - Specifies the code identifying the check digit scheme employed.[Refer HL7 Table 0061 - Check digit scheme].

strIdentifierTypeCode - Specifies A code corresponding to the type of identifier.[Refer HL7 Table 0203 - Identifier type].

objAssigningFacility - Specifies the place or location identifier where the identifier was first assigned to the person

strNameRepresentationCode - Provides an indication of the representation provided by the data item.

objNameContext - Designates the context in which a name is used. [Refer User-defined Table 0448 ]

strNameAssemblyOrder - Specifies a code that represents the preferred display order of the components of this person name. Suggested values are G,F[Refer table 0444.]

strEffectiveDate - Specifies the first date, if known, on which the address is valid and active.

strExpirationDate - Specifies the last date, if known, on which the address is valid and active.

strProfessionalSuffix - Used to specify an abbreviation, or a string of abbreviations, denoting qualifications that support the person's profession, (e.g., licenses).

objAssigningJurisdiction - Specifies the geo-political body that assigned the identifier.

objAssigningAgencyOrDepratment - Specifies the agency or department that assigned the identifier

strSecurityCheck - Specifies the version code that may be assigned to the person identifier

strSecurityCheckScheme - Specifies the check digit scheme.

addPharmacistTreatmentSupplierVerifierID

public void addPharmacistTreatmentSupplierVerifierID(XCN objpharmacistTreatmentSupplierVerifierID)

Add the Pharmacist Treatment Supplier Verifier ID.

Parameters:

objpharmacistTreatmentSupplierVerifierID - Object of Pharmacist Treatment Supplier Verifier ID.

setPharmacistTreatmentSupplierVerifierID

public void setPharmacistTreatmentSupplierVerifierID(ISingleCollection<XCN> objpharmacistTreatmentSupplierVerifierIDList)

Set the Pharmacist Treatment Supplier Verifier ID.

Parameters:

objpharmacistTreatmentSupplierVerifierIDList - List of Pharmacist Treatment Supplier Verifier ID.

setPharmacyOrderType

public void setPharmacyOrderType(java.lang.String strPharmacyOrderType)

Set the Pharmacy Order Type. This field specify the general category of pharmacy order which may be used to determine the processing path the order will take.

Parameters:

strPharmacyOrderType - Specifies Pharmacy Order Type

setPharmacyOrderType

public void setPharmacyOrderType(ID objpharmacyOrderType)

Set the Pharmacy Order Type. This field specify the general category of pharmacy order which may be used to determine the processing path the order will take.

Parameters:

objpharmacyOrderType - Object of Pharmacy Order Type.

addProviderPharmacyTreatmentInstructions

public void addProviderPharmacyTreatmentInstructions(java.lang.String strIdentifier,
                                            java.lang.String strText,
                                            java.lang.String strNameOfCodingSystem,
                                            java.lang.String strAlternateIdentifier,
                                            java.lang.String strAlternateText,
                                            java.lang.String strNameOfAlternateCodingSystem,
                                            java.lang.String strCodingSystemVersionID,
                                            java.lang.String strAlternateCodingSystemVersionId,
                                            java.lang.String strOriginalText,
                                            java.lang.String strSecondAlternateIdentifier,
                                            java.lang.String strSecondAlternateText,
                                            java.lang.String strNameofSecondAlternateCodingSystem,
                                            java.lang.String strSecondAlternateCodingSystemVersionID,
                                            java.lang.String strCodingSystemOID,
                                            java.lang.String strValueSetOID,
                                            java.lang.String strValueSetVersionID,
                                            java.lang.String strAlternateCodingSystemOID,
                                            java.lang.String strAlternateValueSetOID,
                                            java.lang.String strAlternateValueSetVersionID,
                                            java.lang.String strSecondAlternateCodingSystemOID,
                                            java.lang.String strSecondAlternateValueSetOID,
                                            java.lang.String strSecondAlternateValueSetVersionID)

Add the Provider Pharmacy Treatment Instructions.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

addProviderPharmacyTreatmentInstructions

public void addProviderPharmacyTreatmentInstructions(CWE objproviderPharmacyTreatmentInstructions)

Add the Provider Pharmacy Treatment Instructions.

Parameters:

objproviderPharmacyTreatmentInstructions - Object of Provider Pharmacy Treatment Instructions.

setProviderPharmacyTreatmentInstructions

public void setProviderPharmacyTreatmentInstructions(ISingleCollection<CWE> objproviderPharmacyTreatmentInstructionsList)

Set the Provider Pharmacy Treatment Instructions.

Parameters:

objproviderPharmacyTreatmentInstructionsList - List of Provider Pharmacy Treatment Instructions.

addProvidersAdministrationInstructions

public void addProvidersAdministrationInstructions(java.lang.String strIdentifier,
                                          java.lang.String strText,
                                          java.lang.String strNameOfCodingSystem,
                                          java.lang.String strAlternateIdentifier,
                                          java.lang.String strAlternateText,
                                          java.lang.String strNameOfAlternateCodingSystem,
                                          java.lang.String strCodingSystemVersionID,
                                          java.lang.String strAlternateCodingSystemVersionId,
                                          java.lang.String strOriginalText,
                                          java.lang.String strSecondAlternateIdentifier,
                                          java.lang.String strSecondAlternateText,
                                          java.lang.String strNameofSecondAlternateCodingSystem,
                                          java.lang.String strSecondAlternateCodingSystemVersionID,
                                          java.lang.String strCodingSystemOID,
                                          java.lang.String strValueSetOID,
                                          java.lang.String strValueSetVersionID,
                                          java.lang.String strAlternateCodingSystemOID,
                                          java.lang.String strAlternateValueSetOID,
                                          java.lang.String strAlternateValueSetVersionID,
                                          java.lang.String strSecondAlternateCodingSystemOID,
                                          java.lang.String strSecondAlternateValueSetOID,
                                          java.lang.String strSecondAlternateValueSetVersionID)

Add the Providers Administration Instructions. This field specify the ordering provider's instructions to the patient or to the provider administering the drug or treatment.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

addProvidersAdministrationInstructions

public void addProvidersAdministrationInstructions(CWE objprovidersAdministrationInstructions)

Add the Providers Administration Instructions. This field specify the ordering provider's instructions to the patient or to the provider administering the drug or treatment.

Parameters:

objprovidersAdministrationInstructions - Object of Providers Administration Instructions.

setProvidersAdministrationInstructions

public void setProvidersAdministrationInstructions(ISingleCollection<CWE> objprovidersAdministrationInstructionsList)

Set the Providers Administration Instructions. This field specify the ordering provider's instructions to the patient or to the provider administering the drug or treatment.

Parameters:

objprovidersAdministrationInstructionsList - List of Providers Administration Instructions.

setRequestedDispenseAmount

public void setRequestedDispenseAmount(java.lang.String strRequestedDispenseAmount)

Set the Requested Dispense Amount.

Parameters:

strRequestedDispenseAmount - Specifies Requested Dispense Amount.

setRequestedDispenseAmount

public void setRequestedDispenseAmount(NM objrequestedDispenseAmount)

Set the Requested Dispense Amount.

Parameters:

objrequestedDispenseAmount - Object of Requested Dispense Amount.

setRequestedDispenseCode

public void setRequestedDispenseCode(java.lang.String strIdentifier,
                            java.lang.String strText,
                            java.lang.String strNameOfCodingSystem,
                            java.lang.String strAlternateIdentifier,
                            java.lang.String strAlternateText,
                            java.lang.String strNameOfAlternateCodingSystem,
                            java.lang.String strCodingSystemVersionID,
                            java.lang.String strAlternateCodingSystemVersionId,
                            java.lang.String strOriginalText,
                            java.lang.String strSecondAlternateIdentifier,
                            java.lang.String strSecondAlternateText,
                            java.lang.String strNameofSecondAlternateCodingSystem,
                            java.lang.String strSecondAlternateCodingSystemVersionID,
                            java.lang.String strCodingSystemOID,
                            java.lang.String strValueSetOID,
                            java.lang.String strValueSetVersionID,
                            java.lang.String strAlternateCodingSystemOID,
                            java.lang.String strAlternateValueSetOID,
                            java.lang.String strAlternateValueSetVersionID,
                            java.lang.String strSecondAlternateCodingSystemOID,
                            java.lang.String strSecondAlternateValueSetOID,
                            java.lang.String strSecondAlternateValueSetVersionID)

Set the Requested Dispense Code.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setRequestedDispenseCode

public void setRequestedDispenseCode(CWE objrequestedDispenseCode)

Set the Requested Dispense Code.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

setRequestedDispenseUnits

public void setRequestedDispenseUnits(java.lang.String strIdentifier,
                             java.lang.String strText,
                             java.lang.String strNameOfCodingSystem,
                             java.lang.String strAlternateIdentifier,
                             java.lang.String strAlternateText,
                             java.lang.String strNameOfAlternateCodingSystem,
                             java.lang.String strCodingSystemVersionID,
                             java.lang.String strAlternateCodingSystemVersionId,
                             java.lang.String strOriginalText,
                             java.lang.String strSecondAlternateIdentifier,
                             java.lang.String strSecondAlternateText,
                             java.lang.String strNameofSecondAlternateCodingSystem,
                             java.lang.String strSecondAlternateCodingSystemVersionID,
                             java.lang.String strCodingSystemOID,
                             java.lang.String strValueSetOID,
                             java.lang.String strValueSetVersionID,
                             java.lang.String strAlternateCodingSystemOID,
                             java.lang.String strAlternateValueSetOID,
                             java.lang.String strAlternateValueSetVersionID,
                             java.lang.String strSecondAlternateCodingSystemOID,
                             java.lang.String strSecondAlternateValueSetOID,
                             java.lang.String strSecondAlternateValueSetVersionID)

Set the Requested Dispense Units.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setRequestedDispenseUnits

public void setRequestedDispenseUnits(CWE objrequestedDispenseUnits)

Set the Requested Dispense Units.

Parameters:

objrequestedDispenseUnits - Object of Requested Dispense Units.

setRequestedDosageForm

public void setRequestedDosageForm(java.lang.String strIdentifier,
                          java.lang.String strText,
                          java.lang.String strNameOfCodingSystem,
                          java.lang.String strAlternateIdentifier,
                          java.lang.String strAlternateText,
                          java.lang.String strNameOfAlternateCodingSystem,
                          java.lang.String strCodingSystemVersionID,
                          java.lang.String strAlternateCodingSystemVersionId,
                          java.lang.String strOriginalText,
                          java.lang.String strSecondAlternateIdentifier,
                          java.lang.String strSecondAlternateText,
                          java.lang.String strNameofSecondAlternateCodingSystem,
                          java.lang.String strSecondAlternateCodingSystemVersionID,
                          java.lang.String strCodingSystemOID,
                          java.lang.String strValueSetOID,
                          java.lang.String strValueSetVersionID,
                          java.lang.String strAlternateCodingSystemOID,
                          java.lang.String strAlternateValueSetOID,
                          java.lang.String strAlternateValueSetVersionID,
                          java.lang.String strSecondAlternateCodingSystemOID,
                          java.lang.String strSecondAlternateValueSetOID,
                          java.lang.String strSecondAlternateValueSetVersionID)

Set the Requested Dosage Form.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setRequestedDosageForm

public void setRequestedDosageForm(CWE objrequestedDosageForm)

Set the Requested Dosage Form.

Parameters:

objrequestedDosageForm - Object of Requested Dosage Form.

setRequestedDrugStrengthVolume

public void setRequestedDrugStrengthVolume(java.lang.String strRequestedDrugStrengthVolume)

Set the Requested Drug Strength Volume. This field specify the drug concentration contained in measure volume.

Parameters:

strRequestedDrugStrengthVolume - Specifies Requested Drug Strength Volume

setRequestedDrugStrengthVolume

public void setRequestedDrugStrengthVolume(NM objrequestedDrugStrengthVolume)

Set the Requested Drug Strength Volume. This field specify the drug concentration contained in measure volume.

Parameters:

objrequestedDrugStrengthVolume - Object of Requested Drug Strength Volume.

setRequestedDrugStrengthVolumeUnits

public void setRequestedDrugStrengthVolumeUnits(java.lang.String strIdentifier,
                                       java.lang.String strText,
                                       java.lang.String strNameOfCodingSystem,
                                       java.lang.String strAlternateIdentifier,
                                       java.lang.String strAlternateText,
                                       java.lang.String strNameOfAlternateCodingSystem,
                                       java.lang.String strCodingSystemVersionID,
                                       java.lang.String strAlternateCodingSystemVersionId,
                                       java.lang.String strOriginalText,
                                       java.lang.String strSecondAlternateIdentifier,
                                       java.lang.String strSecondAlternateText,
                                       java.lang.String strNameofSecondAlternateCodingSystem,
                                       java.lang.String strSecondAlternateCodingSystemVersionID,
                                       java.lang.String strCodingSystemOID,
                                       java.lang.String strValueSetOID,
                                       java.lang.String strValueSetVersionID,
                                       java.lang.String strAlternateCodingSystemOID,
                                       java.lang.String strAlternateValueSetOID,
                                       java.lang.String strAlternateValueSetVersionID,
                                       java.lang.String strSecondAlternateCodingSystemOID,
                                       java.lang.String strSecondAlternateValueSetOID,
                                       java.lang.String strSecondAlternateValueSetVersionID)

Set the Requested Drug Strength Volume Units.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setRequestedDrugStrengthVolumeUnits

public void setRequestedDrugStrengthVolumeUnits(CWE objrequestedDrugStrengthVolumeUnits)

Set the Requested Drug Strength Volume Units.

Parameters:

objrequestedDrugStrengthVolumeUnits - Object of Requested Drug Strength Volume Units.

setRequestedGiveAmt_Max

public void setRequestedGiveAmt_Max(java.lang.String strRequestedGiveAmt_Max)

Set the Requested Give Amt Max.

Parameters:

strRequestedGiveAmt_Max - Specifies Requested Give Amount Maximum

setRequestedGiveAmt_Max

public void setRequestedGiveAmt_Max(NM objrequestedGiveAmt_Max)

Set the Requested Give Amt Max.

Parameters:

objrequestedGiveAmt_Max - Object of Requested Give Amt Max.

setRequestedGiveAmt_Min

public void setRequestedGiveAmt_Min(java.lang.String strRequestedGiveAmt_Min)

Set the Requested Give Amt Min.

Parameters:

strRequestedGiveAmt_Min - Specifies Requested Give Amount Minimum

setRequestedGiveAmt_Min

public void setRequestedGiveAmt_Min(NM objrequestedGiveAmt_Min)

Set the Requested Give Amt Min.

Parameters:

objrequestedGiveAmt_Min - Object of Requested Give Amt Min.

setRequestedGiveCode

public void setRequestedGiveCode(java.lang.String strIdentifier,
                        java.lang.String strText,
                        java.lang.String strNameOfCodingSystem,
                        java.lang.String strAlternateIdentifier,
                        java.lang.String strAlternateText,
                        java.lang.String strNameOfAlternateCodingSystem,
                        java.lang.String strCodingSystemVersionID,
                        java.lang.String strAlternateCodingSystemVersionId,
                        java.lang.String strOriginalText,
                        java.lang.String strSecondAlternateIdentifier,
                        java.lang.String strSecondAlternateText,
                        java.lang.String strNameofSecondAlternateCodingSystem,
                        java.lang.String strSecondAlternateCodingSystemVersionID,
                        java.lang.String strCodingSystemOID,
                        java.lang.String strValueSetOID,
                        java.lang.String strValueSetVersionID,
                        java.lang.String strAlternateCodingSystemOID,
                        java.lang.String strAlternateValueSetOID,
                        java.lang.String strAlternateValueSetVersionID,
                        java.lang.String strSecondAlternateCodingSystemOID,
                        java.lang.String strSecondAlternateValueSetOID,
                        java.lang.String strSecondAlternateValueSetVersionID)

Set the Requested Give Code. This field specify the treatment product or treatment ordered to be given to the patient

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setRequestedGiveCode

public void setRequestedGiveCode(CWE objrequestedGiveCode)

Set the Requested Give Code. This field specify the treatment product or treatment ordered to be given to the patient

Parameters:

objrequestedGiveCode - Object of Requested Give Code.

setRequestedGivePer

public void setRequestedGivePer(java.lang.String strRequestedGivePer)

Set the Requested Give Per. This field specify the time unit to use to calculate the rate at which the pharmaceutical is to be administered.

Parameters:

strRequestedGivePer - Specifies Requested Give Per (Time Unit)

setRequestedGivePer

public void setRequestedGivePer(ST objrequestedGivePer)

Set the Requested Give Per. This field specify the time unit to use to calculate the rate at which the pharmaceutical is to be administered.

Parameters:

objrequestedGivePer - Object of Requested Give Per.

setRequestedGiveRateAmt

public void setRequestedGiveRateAmt(java.lang.String strRequestedGiveRateAmt)

Set the Requested Give Rate Amt.

Parameters:

strRequestedGiveRateAmt - Specifies Requested Give Per (Time Unit)

setRequestedGiveRateAmt

public void setRequestedGiveRateAmt(ST objrequestedGiveRateAmt)

Set the Requested Give Rate Amt.

Parameters:

objrequestedGiveRateAmt - Object of Requested Give Rate Amt.

setRequestedGiveRateUnits

public void setRequestedGiveRateUnits(java.lang.String strIdentifier,
                             java.lang.String strText,
                             java.lang.String strNameOfCodingSystem,
                             java.lang.String strAlternateIdentifier,
                             java.lang.String strAlternateText,
                             java.lang.String strNameOfAlternateCodingSystem,
                             java.lang.String strCodingSystemVersionID,
                             java.lang.String strAlternateCodingSystemVersionId,
                             java.lang.String strOriginalText,
                             java.lang.String strSecondAlternateIdentifier,
                             java.lang.String strSecondAlternateText,
                             java.lang.String strNameofSecondAlternateCodingSystem,
                             java.lang.String strSecondAlternateCodingSystemVersionID,
                             java.lang.String strCodingSystemOID,
                             java.lang.String strValueSetOID,
                             java.lang.String strValueSetVersionID,
                             java.lang.String strAlternateCodingSystemOID,
                             java.lang.String strAlternateValueSetOID,
                             java.lang.String strAlternateValueSetVersionID,
                             java.lang.String strSecondAlternateCodingSystemOID,
                             java.lang.String strSecondAlternateValueSetOID,
                             java.lang.String strSecondAlternateValueSetVersionID)

Set the Requested Give Rate Units.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setRequestedGiveRateUnits

public void setRequestedGiveRateUnits(CWE objrequestedGiveRateUnits)

Set the Requested Give Rate Units.

Parameters:

objrequestedGiveRateUnits - Object of Requested Give Rate Units.

setRequestedGiveStrength

public void setRequestedGiveStrength(java.lang.String strRequestedGiveStrength)

Set the Requested Give Strength.

Parameters:

strRequestedGiveStrength - Specifies Requested Give Strength.

setRequestedGiveStrength

public void setRequestedGiveStrength(NM objrequestedGiveStrength)

Set the Requested Give Strength.

Parameters:

objrequestedGiveStrength - Object of Requested Give Strength.

setRequestedGiveStrengthUnits

public void setRequestedGiveStrengthUnits(java.lang.String strIdentifier,
                                 java.lang.String strText,
                                 java.lang.String strNameOfCodingSystem,
                                 java.lang.String strAlternateIdentifier,
                                 java.lang.String strAlternateText,
                                 java.lang.String strNameOfAlternateCodingSystem,
                                 java.lang.String strCodingSystemVersionID,
                                 java.lang.String strAlternateCodingSystemVersionId,
                                 java.lang.String strOriginalText,
                                 java.lang.String strSecondAlternateIdentifier,
                                 java.lang.String strSecondAlternateText,
                                 java.lang.String strNameofSecondAlternateCodingSystem,
                                 java.lang.String strSecondAlternateCodingSystemVersionID,
                                 java.lang.String strCodingSystemOID,
                                 java.lang.String strValueSetOID,
                                 java.lang.String strValueSetVersionID,
                                 java.lang.String strAlternateCodingSystemOID,
                                 java.lang.String strAlternateValueSetOID,
                                 java.lang.String strAlternateValueSetVersionID,
                                 java.lang.String strSecondAlternateCodingSystemOID,
                                 java.lang.String strSecondAlternateValueSetOID,
                                 java.lang.String strSecondAlternateValueSetVersionID)

Set the Requested Give Strength Units.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setRequestedGiveStrengthUnits

public void setRequestedGiveStrengthUnits(CWE objrequestedGiveStrengthUnits)

Set the Requested Give Strength Units.

Parameters:

objrequestedGiveStrengthUnits - Object of Requested Give Strength Units.

setRequestedGiveUnits

public void setRequestedGiveUnits(java.lang.String strIdentifier,
                         java.lang.String strText,
                         java.lang.String strNameOfCodingSystem,
                         java.lang.String strAlternateIdentifier,
                         java.lang.String strAlternateText,
                         java.lang.String strNameOfAlternateCodingSystem,
                         java.lang.String strCodingSystemVersionID,
                         java.lang.String strAlternateCodingSystemVersionId,
                         java.lang.String strOriginalText,
                         java.lang.String strSecondAlternateIdentifier,
                         java.lang.String strSecondAlternateText,
                         java.lang.String strNameofSecondAlternateCodingSystem,
                         java.lang.String strSecondAlternateCodingSystemVersionID,
                         java.lang.String strCodingSystemOID,
                         java.lang.String strValueSetOID,
                         java.lang.String strValueSetVersionID,
                         java.lang.String strAlternateCodingSystemOID,
                         java.lang.String strAlternateValueSetOID,
                         java.lang.String strAlternateValueSetVersionID,
                         java.lang.String strSecondAlternateCodingSystemOID,
                         java.lang.String strSecondAlternateValueSetOID,
                         java.lang.String strSecondAlternateValueSetVersionID)

Set the Requested Give Units.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setRequestedGiveUnits

public void setRequestedGiveUnits(CWE objrequestedGiveUnits)

Set the Requested Give Units.

Parameters:

objrequestedGiveUnits - Object of Requested Give Units.

addSupplementaryCode

public void addSupplementaryCode(java.lang.String strIdentifier,
                        java.lang.String strText,
                        java.lang.String strNameOfCodingSystem,
                        java.lang.String strAlternateIdentifier,
                        java.lang.String strAlternateText,
                        java.lang.String strNameOfAlternateCodingSystem,
                        java.lang.String strCodingSystemVersionID,
                        java.lang.String strAlternateCodingSystemVersionId,
                        java.lang.String strOriginalText,
                        java.lang.String strSecondAlternateIdentifier,
                        java.lang.String strSecondAlternateText,
                        java.lang.String strNameofSecondAlternateCodingSystem,
                        java.lang.String strSecondAlternateCodingSystemVersionID,
                        java.lang.String strCodingSystemOID,
                        java.lang.String strValueSetOID,
                        java.lang.String strValueSetVersionID,
                        java.lang.String strAlternateCodingSystemOID,
                        java.lang.String strAlternateValueSetOID,
                        java.lang.String strAlternateValueSetVersionID,
                        java.lang.String strSecondAlternateCodingSystemOID,
                        java.lang.String strSecondAlternateValueSetOID,
                        java.lang.String strSecondAlternateValueSetVersionID)

Add the Supplementary Code. This field specify that identification of any codes that might be associated with the pharmaceutical substance.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

addSupplementaryCode

public void addSupplementaryCode(CWE objsupplementaryCode)

Add the Supplementary Code. This field specify that identification of any codes that might be associated with the pharmaceutical substance.

Parameters:

objsupplementaryCode - Object of Supplementary Code.

setSupplementaryCode

public void setSupplementaryCode(ISingleCollection<CWE> objsupplementaryCodeList)

Set the Supplementary Code. This field specify that identification of any codes that might be associated with the pharmaceutical substance.

Parameters:

objsupplementaryCodeList - List of Supplementary Code.

setTotalDailyDose

public void setTotalDailyDose(java.lang.String strQuantity,
                     CWE objUnits)

Set the Total Daily Dose.

Parameters:

strQuantity - Specifies the numeric quantity or amount of an entity.

objUnits - Specifies the units in which the quantity is expressed.

setTotalDailyDose

public void setTotalDailyDose(CQ objtotalDailyDose)

Set the Total Daily Dose.

Parameters:

strQuantity - Specifies the numeric quantity or amount of an entity.

objUnits - Specifies the units in which the quantity is expressed.

setMedicationInstanceIdentifier

public void setMedicationInstanceIdentifier(java.lang.String strEntityIdentifier,
                                   java.lang.String strNamespaceId,
                                   java.lang.String strUniversalId,
                                   java.lang.String strUniversalIdType)

Set the Medication Instance Identifier This field contains a value that uniquely identifies the medication associated with this segment. Rather than identifying the product to be given, as in RXO-1 Requested Give Code, this field serves to identify the medication in association with the order represented by the segment instance. This identifier is persistent within and across message instances.

Parameters:

strEntityIdentifier - Specifies defined by a hierarchic designator, represented by components 2 through 4. [Reference Section 2.A.33, "HD - hierarchic designator".]

strNamespaceId - Specifies the HL7 identifier for the user-defined table of values for this component. [Refer to User-defined Table 0363 - Assigning authority]

strUniversalId - Specifies string formatted according to the scheme defined by the component, (UID type).

strUniversalIdType - Specifies the interpretation of the second component of the HD. Refer to HL7 Table 0301 - Universal ID type for valid values.

setMedicationInstanceIdentifier

public void setMedicationInstanceIdentifier(EI objcpLotNumber)

Set the Medication Instance Identifier This field contains a value that uniquely identifies the medication associated with this segment. Rather than identifying the product to be given, as in RXO-1 Requested Give Code, this field serves to identify the medication in association with the order represented by the segment instance. This identifier is persistent within and across message instances.

Parameters:

objcpLotNumber - object of Cp Lot Number.

setSegmentInstanceIdentifier

public void setSegmentInstanceIdentifier(java.lang.String strEntityIdentifier,
                                java.lang.String strNamespaceId,
                                java.lang.String strUniversalId,
                                java.lang.String strUniversalIdType)

Set the Segment Instance Identifier This field contains a value that uniquely identifies this segment across time and messages.

Parameters:

strEntityIdentifier - Specifies defined by a hierarchic designator, represented by components 2 through 4. [Reference Section 2.A.33, "HD - hierarchic designator".]

strNamespaceId - Specifies the HL7 identifier for the user-defined table of values for this component. [Refer to User-defined Table 0363 - Assigning authority]

strUniversalId - Specifies string formatted according to the scheme defined by the component, (UID type).

strUniversalIdType - Specifies the interpretation of the second component of the HD. Refer to HL7 Table 0301 - Universal ID type for valid values.

setSegmentInstanceIdentifier

public void setSegmentInstanceIdentifier(EI objcpLotNumber)

Set the Medication Instance Identifier This field contains a value that uniquely identifies this segment across time and messages.

Parameters:

objcpLotNumber - object of Cp Lot Number.

setMoodCode

public void setMoodCode(java.lang.String strIdentifier,
               java.lang.String strText,
               java.lang.String strNameOfCodingSystem,
               java.lang.String strAlternateIdentifier,
               java.lang.String strAlternateText,
               java.lang.String strNameOfAlternateCodingSystem,
               java.lang.String strCodingSystemVersionID,
               java.lang.String strAlternateCodingSystemVersionID,
               java.lang.String strOriginalText,
               java.lang.String strSecondAlternateIdentifier,
               java.lang.String strSecondAlternateText,
               java.lang.String strNameOfSecondAltenateCodingSystem,
               java.lang.String strSecondAlternateCodingSystemVersionID,
               java.lang.String strCodingSystemOID,
               java.lang.String strValueSetOID,
               java.lang.String strValueSetVersionID,
               java.lang.String strAlternateCodingSystemOID,
               java.lang.String strAlternateValueSetOID,
               java.lang.String strAlternateValueSetVersionID,
               java.lang.String strSecondAlternateCodingSystemOID,
               java.lang.String strSecondAlternateValueSetOID,
               java.lang.String strSecondAlternateValueSetVersionID)

Set the Mood Code. This field represents the functional state of the order represented by this segment instance.

Parameters:

strIdentifier - Specifies sequence of characters (the code) that uniquely identifies the item being referenced by the CNE.

strText - Specifies descriptive or textual name of the identifier, e.g., myocardial infarction

strNameOfCodingSystem - Specifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies the local or user seen code as described.

strAlternateText - Specifies descriptive or textual name of the alternate identifier.

strNameOfAlternateCodingSystem - Specifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - Specifies the version ID for the coding system.

strAlternateCodingSystemVersionID - Specifies the version ID for the coding system .

strOriginalText - Specifies the original text that was available to an automated process or a human before a specific code was assigned.

strSecondAlternateIdentifier - Specifies a sequence of characters that uniquely identifies the second alternate code

strSecondAlternateText - Specifies a the textual information of the second alternate code

strNameOfSecondAltenateCodingSystem - Specifies the second coding scheme being used in the identifier component.

strSecondAlternateCodingSystemVersionID - Specifies version ID of Second alternative coding system.

strCodingSystemOID - contains the ISO Object identifier for the coding system.

strValueSetOID - contains the value set from which CNE-1 is obtained

strValueSetVersionID - contains the version of the value set identified by CNE-15.

strAlternateCodingSystemOID - contains the ISO Object identifier for the alternate coding system

strAlternateValueSetOID - contains the value set from which CNE-4 is obtained

strAlternateValueSetVersionID - contains the version of the value set identified by CNE-18.

strSecondAlternateCodingSystemOID - contains the value set from which CNE-12 is obtained

strSecondAlternateValueSetOID - contains the value set from which CNE-10 is obtained

strSecondAlternateValueSetVersionID - contains the version of the value set identified by CNE-21.

setMoodCode

public void setMoodCode(CNE objbcBloodGroup)

Set the Mood Code. This field represents the functional state of the order represented by this segment instance.

Parameters:

objbcBloodGroup - Object of Bc Blood Group.

setDispensingPharmacy

public void setDispensingPharmacy(java.lang.String strIdentifier,
                         java.lang.String strText,
                         java.lang.String strNameOfCodingSystem,
                         java.lang.String strAlternateIdentifier,
                         java.lang.String strAlternateText,
                         java.lang.String strNameOfAlternateCodingSystem,
                         java.lang.String strCodingSystemVersionID,
                         java.lang.String strAlternateCodingSystemVersionId,
                         java.lang.String strOriginalText,
                         java.lang.String strSecondAlternateIdentifier,
                         java.lang.String strSecondAlternateText,
                         java.lang.String strNameofSecondAlternateCodingSystem,
                         java.lang.String strSecondAlternateCodingSystemVersionID,
                         java.lang.String strCodingSystemOID,
                         java.lang.String strValueSetOID,
                         java.lang.String strValueSetVersionID,
                         java.lang.String strAlternateCodingSystemOID,
                         java.lang.String strAlternateValueSetOID,
                         java.lang.String strAlternateValueSetVersionID,
                         java.lang.String strSecondAlternateCodingSystemOID,
                         java.lang.String strSecondAlternateValueSetOID,
                         java.lang.String strSecondAlternateValueSetVersionID)

Set the Dispensing Pharmacy. This field is retained for backward compatibility only as of v 27. The information formerly communicated using this field should now be communicated using the PRT segment.

Parameters:

strIdentifier - Specifies of characters (the code) that uniquely identifies the item being referenced.

strText - Specifies The descriptive or textual name of the identifier, e.g., myocardial infarction.

strNameOfCodingSystem - Identifies the coding scheme being used in the identifier component.

strAlternateIdentifier - Specifies an alternate sequence of characters (the code) that uniquely identifies the item being referenced.

strAlternateText - Specifies the descriptive or textual name of the alternate identifier. See usage note in section introduction.

strNameOfAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strCodingSystemVersionID - A sequence of characters that uniquely identifies a second alternate code.

strAlternateCodingSystemVersionId - This component carries the version for the coding system identified by components 4-6.

strOriginalText - The text as seen and/or selected by the user who entered the data.

strSecondAlternateIdentifier - A sequence of characters that uniquely identifies a second alternate code.

strSecondAlternateText - The descriptive or textual name of the alternate identifier.

strNameofSecondAlternateCodingSystem - Identifies the coding scheme being used in the alternate identifier component.

strSecondAlternateCodingSystemVersionID - This component carries the version for the coding system identified by components 10-12.

strCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3.

strValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained.

strValueSetVersionID - This component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published.

strAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6.

strAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained.

strAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.18. The version is a date.

strSecondAlternateCodingSystemOID - This component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12.

strSecondAlternateValueSetOID - This component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained.

strSecondAlternateValueSetVersionID - This component carries the version for the value set identified by CWE.21. The version is a date.

setDispensingPharmacy

public void setDispensingPharmacy(CWE objrequestedGiveUnits)

Set the Dispensing Pharmacy. This field is retained for backward compatibility only as of v 27. The information formerly communicated using this field should now be communicated using the PRT segment.

Parameters:

objrequestedGiveUnits - Object of Requested Give Units.

setDispensingPharmacyAddress

public void setDispensingPharmacyAddress(SAD objStreetAddress,
                                java.lang.String strOtherDesignation,
                                java.lang.String strCity,
                                java.lang.String strStateOrProvince,
                                java.lang.String strZipOrPostalCode,
                                java.lang.String strCountry,
                                java.lang.String strAddressType,
                                java.lang.String strOtherGeographicDesignation,
                                CWE objCountyParishCode,
                                CWE objCensusTract,
                                java.lang.String strAddressRepresentationCode,
                                DTM objEffectiveDate,
                                DTM objExpirationDate,
                                CWE objEXpirationReason,
                                java.lang.String strTemporaryIndicator,
                                java.lang.String strBadAddressIndicator,
                                java.lang.String strAddressUsage,
                                java.lang.String strAddressee,
                                java.lang.String strComment,
                                java.lang.String strPreferenceOrder,
                                CWE objProtectionCode,
                                EI objAddressIdentifier)

Set the Dispensing Pharmacy Address. This field is retained for backward compatibility only as of v 27. The information formerly communicated using this field should now be communicated using the PRT segment.

Parameters:

objStreetAddress - Specifies the street address.

strOtherDesignation - Specifies the Second line of address.

strCity - The city, or district or place where the addressee is located.

strStateOrProvince - Specifies the state or province where the addressee is located.

strZipOrPostalCode - Specifies the zip or postal code where the addressee is located.

strCountry - Specifies the country where the addressee is located.

strAddressType - Specifies the kind or type of address.

strOtherGeographicDesignation - Specifies any other geographic designation.

objCountyParishCode - Specifies a code that represents the county in which the specified address resides.

objCensusTract - Specifies a code that represents the census tract in which the specified address resides.

strAddressRepresentationCode - Specifies representations of the same name/address Suggested values are I,A,P [Refer table 0465]

objEffectiveDate - It is The first date, if known, on which the address is valid and active.

objExpirationDate - It is The last date, if known, on which the address is valid and active.

objExpirationReason - indicates why this address was marked as ended.

strTemporaryIndicator - indicates whether address is considered temporary .

strBadAddressIndicator - indicates whether it is possible to contact the owning entity.

strAddressUsage - indicates how the address is intended to be used.

strAddressee - indicates the name of the person whose address is intended to be used.

strComment - indicated descriptive information

strPreferenceOrder - preference order

objProtectionCode - indicates that an address need to be protected

objAdressIdentifier - indicates a unique identifier for address

setDispensingPharmacyAddress

public void setDispensingPharmacyAddress(XAD objbPIntendedDispenseFromAddress)

Set the Dispensing Pharmacy Address. This field is retained for backward compatibility only as of v 27. The information formerly communicated using this field should now be communicated using the PRT segment.

Parameters:

objbPIntendedDispenseFromAddress - Object of BP Intended Dispense From Address.

setDeliverToPatientLocation

public void setDeliverToPatientLocation(HD objPointOfCare,
                               HD objRoom,
                               HD objBed,
                               HD objFacility,
                               java.lang.String strLocationStatus,
                               java.lang.String strPersonLocationType,
                               java.lang.String strBuilding,
                               java.lang.String strFloor,
                               java.lang.String strLocationDescription,
                               EI objComprehensiveLocationIdentifier,
                               HD objAssigningAuthorityForLocation)

Set the Deliver-to Patient Location. This field specifies the location of the patient to whom the pharmaceutical substance is to be delivered.

Parameters:

strPointOfCare - Specifies the code for the point where patient care is administered.

strRoom - Specifies the code for the patient's room.

strBed - Specifies the code for the patient's bed.

objFacility - Specifies to site interpretation but generally describes the highest level physical designation of an institution, medical center or enterprise.

strLocationStatus - Specifies the code for the status or availability of the location.

strPersonLocationType - Specifies the categorization of the person's location defined by facility, building, floor, point of care, room or bed.

strBuilding - Specifies code for the building where the person is located.

strFloor - Specifies the code for the floor where the person is located.

strLocationDescription - Specifies describes the location in free text.

objComprehensiveLocationIdentifier - Specifies represents the physical location as a whole without regard for the individual components.

objAssigningAuthorityForLocation - Specifies the entity that creates the data for the individual physical location components.

setDeliverToPatientLocation

public void setDeliverToPatientLocation(PL objbDeliverToPatientLocation)

Set the Deliver-to Patient Location. This field specifies the location of the patient to whom the pharmaceutical substance is to be delivered.

Parameters:

objbDeliverToPatientLocation - Object of BP Requested Dispense To Location.

setDeliverToAddress

public void setDeliverToAddress(SAD objStreetAddress,
                       java.lang.String strOtherDesignation,
                       java.lang.String strCity,
                       java.lang.String strStateOrProvince,
                       java.lang.String strZipOrPostalCode,
                       java.lang.String strCountry,
                       java.lang.String strAddressType,
                       java.lang.String strOtherGeographicDesignation,
                       CWE objCountyParishCode,
                       CWE objCensusTract,
                       java.lang.String strAddressRepresentationCode,
                       DTM objEffectiveDate,
                       DTM objExpirationDate,
                       CWE objEXpirationReason,
                       java.lang.String strTemporaryIndicator,
                       java.lang.String strBadAddressIndicator,
                       java.lang.String strAddressUsage,
                       java.lang.String strAddressee,
                       java.lang.String strComment,
                       java.lang.String strPreferenceOrder,
                       CWE objProtectionCode,
                       EI objAddressIdentifier)

Set the Deliver-to Address. This field specifies the address, either mailing or physical, to which the prescription should be mailed or delivered.

Parameters:

objStreetAddress - Specifies the street address.

strOtherDesignation - Specifies the Second line of address.

strCity - The city, or district or place where the addressee is located.

strStateOrProvince - Specifies the state or province where the addressee is located.

strZipOrPostalCode - Specifies the zip or postal code where the addressee is located.

strCountry - Specifies the country where the addressee is located.

strAddressType - Specifies the kind or type of address.

strOtherGeographicDesignation - Specifies any other geographic designation.

objCountyParishCode - Specifies a code that represents the county in which the specified address resides.

objCensusTract - Specifies a code that represents the census tract in which the specified address resides.

strAddressRepresentationCode - Specifies representations of the same name/address Suggested values are I,A,P [Refer table 0465]

objEffectiveDate - It is The first date, if known, on which the address is valid and active.

objExpirationDate - It is The last date, if known, on which the address is valid and active.

objExpirationReason - indicates why this address was marked as ended.

strTemporaryIndicator - indicates whether address is considered temporary .

strBadAddressIndicator - indicates whether it is possible to contact the owning entity.

strAddressUsage - indicates how the address is intended to be used.

strAddressee - indicates the name of the person whose address is intended to be used.

strComment - indicated descriptive information

strPreferenceOrder - preference order

objProtectionCode - indicates that an address need to be protected

objAdressIdentifier - indicates a unique identifier for address

setDeliverToAddress

public void setDeliverToAddress(XAD objDeliverToAddress)

Set the BP Deliver-to Address. This field specifies the address, either mailing or physical, to which the prescription should be mailed or delivered.

Parameters:

objDeliverToAddress - Object of Deliver-to Address.

addPharmacyPhoneNumber

public void addPharmacyPhoneNumber(java.lang.String strTeleCommunicationUseCode,
                          java.lang.String strTeleCommunicationEquipmentType,
                          java.lang.String strCommuinicationAddress,
                          java.lang.String strCountryCode,
                          java.lang.String strAreaCityCode,
                          java.lang.String strLocalNumber,
                          java.lang.String strExtension,
                          java.lang.String strAnyText,
                          java.lang.String strExtensionPrefix,
                          java.lang.String strSpeedDialCode,
                          java.lang.String strUnformattedTelephoneNumber,
                          java.lang.String strEffectiveStartDate,
                          java.lang.String strExpirationDate,
                          CWE objExpirationReason,
                          CWE objProtectionCode,
                          EI objSharedTelecommunicationIdentifier,
                          java.lang.String strPreferenceOrder)

Set the Pharmacy Phone Number. This field contains the telecommunication contact information for the pharmacy.

Parameters:

strTeleCommunicationUseCode - Specifies a code that represents a specific use of a telecommunication number. Suggested values are PRN,ORN,WPN,VHN,ASN,EMR,NET,BPN [Refer table 0201.]

strTeleCommunicationEquipmentType - Specifies a code that represents the type of telecommunication equipment. Suggested values are PH,FX,MD,CP,BP,Internet,X.400,TDD,TTY [Refer table 0202.]

strCommuinicationAddress - Specifies Email address.

strCountryCode - Specifies the Country code.

strAreaCityCode - Specifies the area /City Code.

strLocalNumber - Specifies an Local Number.

strExtension - Specifies an Extension.

strAnyText - Contains comments with respect to the telephone number.

strExtensionPrefix - Specifies the characters established within a company's internal telephone system network used as a prefix to the Extension component for internal dialing.

strSpeedDialCode - Specifies The characters established within a company's internal telephone system used in place of the (external) telephone number.

strUnformattedTelephoneNumber - Specifies an expression of the telephone number as an unparsible string.

strEffectiveStartDate - Specifies start date.

strExpirationDate - Specifies expiration date.

objExpirationReason - Specifies reason why this contact is marked as ended.

objProtectionCode - Specifies reason why this information is sensitive or protected.

objSharedTelecommunicationIdentifier - Specifies a unique phone number phone telephone number or email-id.

strPreferenceOrder - Specifies the preference order for an entity..

addPharmacyPhoneNumber

public void addPharmacyPhoneNumber(XTN objtempPharmacyPhoneNumber)

Sets the Pharmacy Phone Number. This field contains the telecommunication contact information for the pharmacy.

Parameters:

objtempPharmacyPhoneNumber - object of PharmacyPhoneNumber.

setPharmacyPhoneNumber

public void setPharmacyPhoneNumber(ISingleCollection<XTN> objPharmacyPhoneNumber)

Set the Pharmacy Phone Number. This field contains the telecommunication contact information for the pharmacy.

Parameters:

objPharmacyPhoneNumber - List of Phone Number Home.

validate

public boolean validate()
                 throws InvalidSegmentException

Validates HL7 Message objects . Validate method checks for validation each and every segments in side the Message object against specified message Structure. Validation checks include optionality of segment or group. It also verifies the number of times segment or group is repeated in message. e.g {PSH} while parsing PSH segment validate method will check for its mandatory presence. [PSH] in this case validate will throw exception if one tries to enter more than one PSH segment.

Specified by:

validate in interface ISegment

Overrides:

validate in class Segment

Returns:

boolean - true or false.

Throws:

InvalidSegmentException - Throws when Segment Validation fails.